diff mbox

arm: dts: Add support for Compulab sbc-t3530 with cm-t35

Message ID 1392986165-12238-1-git-send-email-sr@denx.de (mailing list archive)
State New, archived
Headers show

Commit Message

Stefan Roese Feb. 21, 2014, 12:36 p.m. UTC 
The cm-t3530 SOM is equipped with the OMAP3530 and does not boot with
the cm-t3730 dts file as it used the omap36xx.dtsi. Add a separate
dts/dtsi for this board to support it correctly.

I moved some common parts into omap3-cm-t3x30.dtsi. And removed
the SDIO/WLAN support for now. As I don't know exactly how this
should be done. Perhaps somebody else might jump in here...

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/Makefile            |  1 +
 arch/arm/boot/dts/omap3-cm-t3530.dts  | 29 +++++++++++++++++++
 arch/arm/boot/dts/omap3-cm-t3730.dts  | 54 ++++-------------------------------
 arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 44 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap3-sbc-t3530.dts | 30 +++++++++++++++++++
 5 files changed, 110 insertions(+), 48 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-cm-t3530.dts
 create mode 100644 arch/arm/boot/dts/omap3-sbc-t3530.dts

Comments

Igor Grinberg Feb. 23, 2014, 12:33 p.m. UTC | #1 
Hi Stefan,

Have you seen the series sent by Dmitry on 12-Jan-2014?
It is called "ARM: dts: sbc-t3x: add support for more boards",
or you can check it out here:
http://www.spinics.net/lists/arm-kernel/msg300078.html

On 02/21/14 14:36, Stefan Roese wrote:
> The cm-t3530 SOM is equipped with the OMAP3530 and does not boot with
> the cm-t3730 dts file as it used the omap36xx.dtsi. Add a separate
> dts/dtsi for this board to support it correctly.
> 
> I moved some common parts into omap3-cm-t3x30.dtsi. And removed
> the SDIO/WLAN support for now. As I don't know exactly how this
> should be done. Perhaps somebody else might jump in here...
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Igor Grinberg <grinberg@compulab.co.il>
> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
> Cc: Tony Lindgren <tony@atomide.com>
> ---
>  arch/arm/boot/dts/Makefile            |  1 +
>  arch/arm/boot/dts/omap3-cm-t3530.dts  | 29 +++++++++++++++++++
>  arch/arm/boot/dts/omap3-cm-t3730.dts  | 54 ++++-------------------------------
>  arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 44 ++++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap3-sbc-t3530.dts | 30 +++++++++++++++++++
>  5 files changed, 110 insertions(+), 48 deletions(-)
>  create mode 100644 arch/arm/boot/dts/omap3-cm-t3530.dts
>  create mode 100644 arch/arm/boot/dts/omap3-sbc-t3530.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6d1e43d..6fd1b34 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -200,6 +200,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>  	omap3430-sdp.dtb \
>  	omap3-beagle.dtb \
>  	omap3-cm-t3730.dtb \
> +	omap3-sbc-t3530.dtb \
>  	omap3-sbc-t3730.dtb \
>  	omap3-devkit8000.dtb \
>  	omap3-beagle-xm.dtb \
> diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
> new file mode 100644
> index 0000000..35a1fc2
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
> @@ -0,0 +1,29 @@
> +/*
> + * Support for CompuLab CM-T3530
> + */
> +/dts-v1/;
> +
> +#include "omap34xx-hs.dtsi"
> +#include "omap3-cm-t3x30.dtsi"
> +
> +/ {
> +	model = "CompuLab CM-T3530";
> +	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
> +};
> +
> +&mmc1 {
> +	vmmc-supply = <&vmmc1>;
> +	bus-width = <4>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins>;
> +};
> +
> +&smsc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&smsc1_pins>;
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart3_pins>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
> index 486f4d6..3e05b11 100644
> --- a/arch/arm/boot/dts/omap3-cm-t3730.dts
> +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
> @@ -32,39 +32,14 @@
>  };
>  
>  &omap3_pmx_core {
> -	mmc1_pins: pinmux_mmc1_pins {
> -		pinctrl-single,pins = <
> -			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
> -			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
> -			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
> -			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
> -			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
> -			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
> -		>;
> -	};
> -
>  	mmc2_pins: pinmux_mmc2_pins {
>  		pinctrl-single,pins = <
> -			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
> -			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
> -			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
> -			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
> -			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
> -			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
> -		>;
> -	};
> -
> -	smsc1_pins: pinmux_smsc1_pins {
> -		pinctrl-single,pins = <
> -			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ncs5.gpmc_ncs5 */
> -			0x16a (PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
> -		>;
> -	};
> -
> -	uart3_pins: pinmux_uart3_pins {
> -		pinctrl-single,pins = <
> -			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
> -			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
> +			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk.sdmmc2_clk */
> +			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd.sdmmc2_cmd */
> +			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0.sdmmc2_dat0 */
> +			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1.sdmmc2_dat1 */
> +			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2.sdmmc2_dat2 */
> +			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3.sdmmc2_dat3 */
>  		>;
>  	};
>  
> @@ -76,13 +51,6 @@
>  	};
>  };
>  
> -&mmc1 {
> -	vmmc-supply = <&vmmc1>;
> -	bus-width = <4>;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mmc1_pins>;
> -};
> -
>  &mmc2 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&mmc2_pins>;
> @@ -92,13 +60,3 @@
>  	bus-width = <4>;
>  	cap-power-off-card;
>  };
> -
> -&smsc1 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&smsc1_pins>;
> -};
> -
> -&uart3 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&uart3_pins>;
> -};
> diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
> index 3a9f004..0eadd4a 100644
> --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
> +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
> @@ -36,6 +36,33 @@
>  	};
>  };
>  
> +&omap3_pmx_core {
> +	mmc1_pins: pinmux_mmc1_pins {
> +		pinctrl-single,pins = <
> +			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
> +			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
> +			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
> +			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
> +			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
> +			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
> +		>;
> +	};
> +
> +	smsc1_pins: pinmux_smsc1_pins {
> +		pinctrl-single,pins = <
> +			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ncs5.gpmc_ncs5 */
> +			0x16a (PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
> +		>;
> +	};
> +
> +	uart3_pins: pinmux_uart3_pins {
> +		pinctrl-single,pins = <
> +			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
> +			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
> +		>;
> +	};
> +};
> +
>  &gpmc {
>  	ranges = <5 0 0x2c000000 0x01000000>;
>  
> @@ -83,6 +110,23 @@
>  	};
>  };
>  
> +&mmc1 {
> +	vmmc-supply = <&vmmc1>;
> +	bus-width = <4>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins>;
> +};
> +
> +&smsc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&smsc1_pins>;
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart3_pins>;
> +};
> +
>  #include "twl4030.dtsi"
>  #include "twl4030_omap3.dtsi"
>  
> diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
> new file mode 100644
> index 0000000..b548343
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
> @@ -0,0 +1,30 @@
> +/*
> + * Support for CompuLab SBC-T3530 with CM-T3530
> + */
> +
> +#include "omap3-cm-t3530.dts"
> +#include "omap3-sb-t35.dtsi"
> +
> +/ {
> +	model = "CompuLab SBC-T3530 with CM-T3530";
> +	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
> +};
> +
> +&gpmc {
> +	ranges = <5 0 0x2c000000 0x01000000>,
> +		 <4 0 0x2d000000 0x01000000>;
> +};
> +
> +&smsc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&smsc2_pins>;
> +};
> +
> +&omap3_pmx_core {
> +	smsc2_pins: pinmux_smsc2_pins {
> +		pinctrl-single,pins = <
> +			0x86 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ncs4.gpmc_ncs4 */
> +			0xa2 (PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
> +		>;
> +	};
> +};
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6d1e43d..6fd1b34 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -200,6 +200,7 @@  dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
 	omap3-cm-t3730.dtb \
+	omap3-sbc-t3530.dtb \
 	omap3-sbc-t3730.dtb \
 	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
new file mode 100644
index 0000000..35a1fc2
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -0,0 +1,29 @@ 
+/*
+ * Support for CompuLab CM-T3530
+ */
+/dts-v1/;
+
+#include "omap34xx-hs.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+	model = "CompuLab CM-T3530";
+	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&smsc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smsc1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 486f4d6..3e05b11 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -32,39 +32,14 @@ 
 };
 
 &omap3_pmx_core {
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	smsc1_pins: pinmux_smsc1_pins {
-		pinctrl-single,pins = <
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ncs5.gpmc_ncs5 */
-			0x16a (PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
@@ -76,13 +51,6 @@ 
 	};
 };
 
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -92,13 +60,3 @@ 
 	bus-width = <4>;
 	cap-power-off-card;
 };
-
-&smsc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&smsc1_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index 3a9f004..0eadd4a 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -36,6 +36,33 @@ 
 	};
 };
 
+&omap3_pmx_core {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	smsc1_pins: pinmux_smsc1_pins {
+		pinctrl-single,pins = <
+			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ncs5.gpmc_ncs5 */
+			0x16a (PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+};
+
 &gpmc {
 	ranges = <5 0 0x2c000000 0x01000000>;
 
@@ -83,6 +110,23 @@ 
 	};
 };
 
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&smsc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smsc1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
 
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
new file mode 100644
index 0000000..b548343
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
@@ -0,0 +1,30 @@ 
+/*
+ * Support for CompuLab SBC-T3530 with CM-T3530
+ */
+
+#include "omap3-cm-t3530.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3530 with CM-T3530";
+	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+};
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>,
+		 <4 0 0x2d000000 0x01000000>;
+};
+
+&smsc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smsc2_pins>;
+};
+
+&omap3_pmx_core {
+	smsc2_pins: pinmux_smsc2_pins {
+		pinctrl-single,pins = <
+			0x86 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ncs4.gpmc_ncs4 */
+			0xa2 (PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
+		>;
+	};
+};