| Message ID | 1393175982-18516-2-git-send-email-andrew@lunn.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Dear Andrew Lunn, On Sun, 23 Feb 2014 18:19:39 +0100, Andrew Lunn wrote: > The binding has existed for a while, so add the missing node so it can > be used by devices. > > Signed-off-by: Andrew Lunn <andrew@lunn.ch> > --- > arch/arm/boot/dts/kirkwood.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi > index 7b921b30cfcb..841ca3affbf5 100644 > --- a/arch/arm/boot/dts/kirkwood.dtsi > +++ b/arch/arm/boot/dts/kirkwood.dtsi > @@ -310,5 +310,14 @@ > #phy-cells = <0>; > status = "ok"; > }; > + > + audio0: audio-controller@a0000 { > + compatible = "marvell,kirkwood-audio"; > + reg = <0xa0000 0x2210>; > + interrupts = <24>; > + clocks = <&gate_clk 9>; > + clock-names = "internal"; > + status = "disabled"; Bad indentation for all properties except the first one. Thomas
Hello. On 23-02-2014 21:19, Andrew Lunn wrote: > The binding has existed for a while, so add the missing node so it can > be used by devices. > Signed-off-by: Andrew Lunn <andrew@lunn.ch> > --- > arch/arm/boot/dts/kirkwood.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi > index 7b921b30cfcb..841ca3affbf5 100644 > --- a/arch/arm/boot/dts/kirkwood.dtsi > +++ b/arch/arm/boot/dts/kirkwood.dtsi > @@ -310,5 +310,14 @@ > #phy-cells = <0>; > status = "ok"; > }; > + > + audio0: audio-controller@a0000 { > + compatible = "marvell,kirkwood-audio"; > + reg = <0xa0000 0x2210>; > + interrupts = <24>; > + clocks = <&gate_clk 9>; > + clock-names = "internal"; > + status = "disabled"; > + }; Could you uniformly indent the node with tabs (like at least the one above it)? WBR, Sergei
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7b921b30cfcb..841ca3affbf5 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -310,5 +310,14 @@ #phy-cells = <0>; status = "ok"; }; + + audio0: audio-controller@a0000 { + compatible = "marvell,kirkwood-audio"; + reg = <0xa0000 0x2210>; + interrupts = <24>; + clocks = <&gate_clk 9>; + clock-names = "internal"; + status = "disabled"; + }; }; };
The binding has existed for a while, so add the missing node so it can be used by devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- arch/arm/boot/dts/kirkwood.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)