@@ -92,6 +92,13 @@ config MACH_KIRKWOOD
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
+config MACH_T5325
+ bool "HP T5325 thin client"
+ depends on MACH_KIRKWOOD
+ help
+ Say 'Y' here if you want your kernel to support the
+ HP T5325 Thin client
+
endmenu
endif
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
+obj-$(CONFIG_MACH_T5325) += board-t5325.o
new file mode 100644
@@ -0,0 +1,41 @@
+/*
+ * HP T5325 Board Setup
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <sound/alc5623.h>
+#include "board.h"
+
+static struct platform_device hp_t5325_audio_device = {
+ .name = "t5325-audio",
+ .id = -1,
+};
+
+static struct alc5623_platform_data alc5621_data = {
+ .add_ctrl = 0x3700,
+ .jack_det_ctrl = 0x4810,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("alc5621", 0x1a),
+ .platform_data = &alc5621_data,
+ },
+};
+
+void __init t5325_init(void)
+{
+ i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
+ platform_device_register(&hp_t5325_audio_device);
+}
new file mode 100644
@@ -0,0 +1,22 @@
+/*
+ * Board functions for Marvell System On Chip
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MVEBU_BOARD_H
+#define __ARCH_MVEBU_BOARD_H
+
+#ifdef CONFIG_MACH_T5325
+void t5325_init(void);
+#else
+static inline void t5325_init(void) {};
+#endif
+
+#endif
@@ -25,6 +25,7 @@
#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"
+#include "board.h"
static struct resource kirkwood_cpufreq_resources[] = {
[0] = {
@@ -158,6 +159,11 @@ void kirkwood_disable_mbus_error_propagation(void)
writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
}
+static struct of_dev_auxdata auxdata[] __initdata = {
+ OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
+ "mvebu-audio", NULL),
+ { /* sentinel */ }
+};
static void __init kirkwood_dt_init(void)
{
@@ -174,7 +180,10 @@ static void __init kirkwood_dt_init(void)
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ if (of_machine_is_compatible("hp,t5325"))
+ t5325_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
}
static const char * const kirkwood_dt_board_compat[] = {
Convert the kirkwood t5325-setup.c to mostly device tree for mach-mvebu. Part of the audio setup needs to remain in C for the moment until suitable bindings are designed and implemented. So add board code, triggered by the compatibility string. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Remove spaces around KEY_POWER Correct indentation of help text in Kconfig. Put dts file into a patch of its own. v3: Defer dts Makefile patch to next patch. --- arch/arm/mach-mvebu/Kconfig | 7 +++++++ arch/arm/mach-mvebu/Makefile | 1 + arch/arm/mach-mvebu/board-t5325.c | 41 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mvebu/board.h | 22 +++++++++++++++++++++ arch/arm/mach-mvebu/kirkwood.c | 11 ++++++++++- 5 files changed, 81 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mvebu/board-t5325.c create mode 100644 arch/arm/mach-mvebu/board.h