diff mbox

[RESEND,2/9] ARM: dts: am335x-evm: add SD card hotplug support

Message ID 1393858226-32595-4-git-send-email-mugunthanvnm@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mugunthan V N March 3, 2014, 2:50 p.m. UTC 
From: Balaji T K <balajitk@ti.com>

Add card detect gpio for SD card slot

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 07d61bb..28ae040 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -260,6 +260,12 @@ 
 		>;
 	};
 
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
 	lcd_pins_s0: lcd_pins_s0 {
 		pinctrl-single,pins = <
 			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
@@ -644,6 +650,9 @@ 
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {