@@ -151,6 +151,29 @@
MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
>;
};
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
+ MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
+ MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+ MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
+ >;
+ };
+
+ pinctrl_usbh1_vbus: usbh1-vbusgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
+ >;
+ };
};
};
@@ -173,3 +196,27 @@
fsl,uart-has-rtscts;
status = "okay";
};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ phy_type = "ulpi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ phy_type = "utmi_wide";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
+
+&usbphy1 {
+ clock-frequency = <19200000>;
+};
Signed-off-by: Denis Carikli <denis@eukrea.com> --- .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 47 ++++++++++++++++++++ 1 file changed, 47 insertions(+)