diff mbox

[1/6] clk: mvebu: Support Armada 380 SoC on the core divider clock

Message ID 1394637404-7651-2-git-send-email-ezequiel.garcia@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ezequiel Garcia March 12, 2014, 3:16 p.m. UTC
This commit adds support for the Core Divider clocks of the Armada
380 SoCs. Similarly to Armada 370 and XP, the Core Divider clocks of
the 380 have gate capabilities. The only difference is the register layout.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
 drivers/clk/mvebu/clk-corediv.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox

Patch

diff --git a/drivers/clk/mvebu/clk-corediv.c b/drivers/clk/mvebu/clk-corediv.c
index 4da6076..911dbb6 100644
--- a/drivers/clk/mvebu/clk-corediv.c
+++ b/drivers/clk/mvebu/clk-corediv.c
@@ -204,6 +204,22 @@  static const struct clk_corediv_soc_desc armada370_corediv_soc = {
 	.ratio_offset = 0x8,
 };
 
+static const struct clk_corediv_soc_desc armada380_corediv_soc = {
+	.descs = mvebu_corediv_desc,
+	.ndescs = ARRAY_SIZE(mvebu_corediv_desc),
+	.ops = {
+		.enable = clk_corediv_enable,
+		.disable = clk_corediv_disable,
+		.is_enabled = clk_corediv_is_enabled,
+		.recalc_rate = clk_corediv_recalc_rate,
+		.round_rate = clk_corediv_round_rate,
+		.set_rate = clk_corediv_set_rate,
+	},
+	.ratio_reload = BIT(8),
+	.enable_bit_offset = 16,
+	.ratio_offset = 0x4,
+};
+
 static const struct clk_corediv_soc_desc armada375_corediv_soc = {
 	.descs = mvebu_corediv_desc,
 	.ndescs = ARRAY_SIZE(mvebu_corediv_desc),
@@ -290,3 +306,10 @@  static void __init armada375_corediv_clk_init(struct device_node *node)
 }
 CLK_OF_DECLARE(armada375_corediv_clk, "marvell,armada-375-corediv-clock",
 	       armada375_corediv_clk_init);
+
+static void __init armada380_corediv_clk_init(struct device_node *node)
+{
+	return mvebu_corediv_clk_init(node, &armada380_corediv_soc);
+}
+CLK_OF_DECLARE(armada380_corediv_clk, "marvell,armada-380-corediv-clock",
+	       armada380_corediv_clk_init);