diff mbox

[v4,1/8] ARM: dts: mx25: USB block requires only one clock

Message ID 1394702326-25558-1-git-send-email-denis@eukrea.com (mailing list archive)
State New, archived
Headers show

Commit Message

Denis Carikli March 13, 2014, 9:18 a.m. UTC 
From: Fabio Estevam <fabio.estevam@freescale.com>

Like other imx SoCs only one USB clock is needed on mx25.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/boot/dts/imx25.dtsi |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

Comments

Shawn Guo March 14, 2014, 8:40 a.m. UTC | #1 
On Thu, Mar 13, 2014 at 10:18:39AM +0100, Denis Carikli wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Like other imx SoCs only one USB clock is needed on mx25.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Applied all except the driver one which has been applied by Peter.

Shawn
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 77bb743..829791e 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -496,8 +496,7 @@ 
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
+				clocks = <&clks 70>;
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
@@ -506,8 +505,7 @@ 
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
+				clocks = <&clks 70>;
 				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};