diff mbox

ARM: dts: imx27-phytec-phycore-rdk: Add display support

Message ID 1394860960-3643-1-git-send-email-shc_work@mail.ru (mailing list archive)
State New, archived
Headers show

Commit Message

Alexander Shiyan March 15, 2014, 5:22 a.m. UTC 
This patch adds FB, Sharp-LQ035Q7 display (add-on module) and
corresponded pinctrl devicetree nodes to the Phytec PCM970 RDK.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 64 ++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

Comments

Shawn Guo March 22, 2014, 5:55 a.m. UTC | #1 
On Sat, Mar 15, 2014 at 09:22:40AM +0400, Alexander Shiyan wrote:
> This patch adds FB, Sharp-LQ035Q7 display (add-on module) and
> corresponded pinctrl devicetree nodes to the Phytec PCM970 RDK.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 86510ed..2e670c5 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -12,6 +12,27 @@ 
 / {
 	model = "Phytec pcm970";
 	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+
+	display0: LQ035Q7 {
+		model = "Sharp-LQ035Q7";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xf00080c0>;
+
+		display-timings {
+			timing0: 240x320 {
+				clock-frequency = <5500000>;
+				hactive = <240>;
+				vactive = <320>;
+				hback-porch = <5>;
+				hsync-len = <7>;
+				hfront-porch = <16>;
+				vback-porch = <7>;
+				vsync-len = <1>;
+				vfront-porch = <9>;
+			};
+		};
+	};
 };
 
 &cspi1 {
@@ -21,6 +42,17 @@ 
 		   <&gpio4 27 GPIO_ACTIVE_LOW>;
 };
 
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
+	display = <&display0>;
+	lcd-supply = <&reg_5v0>;
+	fsl,dmacr = <0x00020010>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -43,6 +75,38 @@ 
 			>;
 		};
 
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
 		pinctrl_i2c1: i2c1grp {
 			/* Add pullup to DATA line */
 			fsl,pins = <