@@ -99,7 +99,6 @@ config SATA_AHCI_PLATFORM
config AHCI_ST
tristate "ST AHCI SATA support"
- depends on SATA_AHCI_PLATFORM
depends on ARCH_STI
help
This option enables support for ST AHCI SATA controller.
@@ -108,7 +107,7 @@ config AHCI_ST
config AHCI_IMX
tristate "Freescale i.MX AHCI SATA support"
- depends on SATA_AHCI_PLATFORM && MFD_SYSCON
+ depends on MFD_SYSCON
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
@@ -117,7 +116,7 @@ config AHCI_IMX
config AHCI_SUNXI
tristate "Allwinner sunxi AHCI SATA support"
- depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
+ depends on ARCH_SUNXI
help
This option enables support for the Allwinner sunxi SoC's
onboard AHCI SATA.
@@ -4,15 +4,15 @@ obj-$(CONFIG_ATA) += libata.o
# non-SFF interface
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
-obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
+obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
-obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
-obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o
-obj-$(CONFIG_AHCI_ST) += ahci_st.o
+obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
@@ -12,28 +12,15 @@
* any later version.
*/
-#include <linux/clk.h>
#include <linux/kernel.h>
-#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/pm.h>
-#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
-#include <linux/phy/phy.h>
-#include <linux/pm_runtime.h>
#include "ahci.h"
-static void ahci_host_stop(struct ata_host *host);
-
-struct ata_port_operations ahci_platform_ops = {
- .inherits = &ahci_ops,
- .host_stop = ahci_host_stop,
-};
-EXPORT_SYMBOL_GPL(ahci_platform_ops);
-
static const struct ata_port_info ahci_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
@@ -41,345 +28,6 @@ static const struct ata_port_info ahci_port_info = {
.port_ops = &ahci_platform_ops,
};
-static struct scsi_host_template ahci_platform_sht = {
- AHCI_SHT("ahci_platform"),
-};
-
-/**
- * ahci_platform_enable_clks - Enable platform clocks
- * @hpriv: host private area to store config values
- *
- * This function enables all the clks found in hpriv->clks, starting at
- * index 0. If any clk fails to enable it disables all the clks already
- * enabled in reverse order, and then returns an error.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
-{
- int c, rc;
-
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
- rc = clk_prepare_enable(hpriv->clks[c]);
- if (rc)
- goto disable_unprepare_clk;
- }
- return 0;
-
-disable_unprepare_clk:
- while (--c >= 0)
- clk_disable_unprepare(hpriv->clks[c]);
- return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
-
-/**
- * ahci_platform_disable_clks - Disable platform clocks
- * @hpriv: host private area to store config values
- *
- * This function disables all the clks found in hpriv->clks, in reverse
- * order of ahci_platform_enable_clks (starting at the end of the array).
- */
-void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
-{
- int c;
-
- for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
- if (hpriv->clks[c])
- clk_disable_unprepare(hpriv->clks[c]);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
-
-/**
- * ahci_platform_enable_resources - Enable platform resources
- * @hpriv: host private area to store config values
- *
- * This function enables all ahci_platform managed resources in the
- * following order:
- * 1) Regulator
- * 2) Clocks (through ahci_platform_enable_clks)
- * 3) Phy
- *
- * If resource enabling fails at any point the previous enabled resources
- * are disabled in reverse order.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
-{
- int rc;
-
- if (hpriv->target_pwr) {
- rc = regulator_enable(hpriv->target_pwr);
- if (rc)
- return rc;
- }
-
- rc = ahci_platform_enable_clks(hpriv);
- if (rc)
- goto disable_regulator;
-
- if (hpriv->phy) {
- rc = phy_init(hpriv->phy);
- if (rc)
- goto disable_clks;
-
- rc = phy_power_on(hpriv->phy);
- if (rc) {
- phy_exit(hpriv->phy);
- goto disable_clks;
- }
- }
-
- return 0;
-
-disable_clks:
- ahci_platform_disable_clks(hpriv);
-
-disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
- return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
-
-/**
- * ahci_platform_disable_resources - Disable platform resources
- * @hpriv: host private area to store config values
- *
- * This function disables all ahci_platform managed resources in the
- * following order:
- * 1) Phy
- * 2) Clocks (through ahci_platform_disable_clks)
- * 3) Regulator
- */
-void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
-{
- if (hpriv->phy) {
- phy_power_off(hpriv->phy);
- phy_exit(hpriv->phy);
- }
-
- ahci_platform_disable_clks(hpriv);
-
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
-
-static void ahci_platform_put_resources(struct device *dev, void *res)
-{
- struct ahci_host_priv *hpriv = res;
- int c;
-
- if (hpriv->got_runtime_pm) {
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
- }
-
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
- clk_put(hpriv->clks[c]);
-}
-
-/**
- * ahci_platform_get_resources - Get platform resources
- * @pdev: platform device to get resources for
- *
- * This function allocates an ahci_host_priv struct, and gets the following
- * resources, storing a reference to them inside the returned struct:
- *
- * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
- * 2) regulator for controlling the targets power (optional)
- * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
- * or for non devicetree enabled platforms a single clock
- * 4) phy (optional)
- *
- * RETURNS:
- * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
- */
-struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct ahci_host_priv *hpriv;
- struct clk *clk;
- int i, rc = -ENOMEM;
-
- if (!devres_open_group(dev, NULL, GFP_KERNEL))
- return ERR_PTR(-ENOMEM);
-
- hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
- GFP_KERNEL);
- if (!hpriv)
- goto err_out;
-
- devres_add(dev, hpriv);
-
- hpriv->mmio = devm_ioremap_resource(dev,
- platform_get_resource(pdev, IORESOURCE_MEM, 0));
- if (IS_ERR(hpriv->mmio)) {
- dev_err(dev, "no mmio space\n");
- rc = PTR_ERR(hpriv->mmio);
- goto err_out;
- }
-
- hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
- if (IS_ERR(hpriv->target_pwr)) {
- rc = PTR_ERR(hpriv->target_pwr);
- if (rc == -EPROBE_DEFER)
- goto err_out;
- hpriv->target_pwr = NULL;
- }
-
- for (i = 0; i < AHCI_MAX_CLKS; i++) {
- /*
- * For now we must use clk_get(dev, NULL) for the first clock,
- * because some platforms (da850, spear13xx) are not yet
- * converted to use devicetree for clocks. For new platforms
- * this is equivalent to of_clk_get(dev->of_node, 0).
- */
- if (i == 0)
- clk = clk_get(dev, NULL);
- else
- clk = of_clk_get(dev->of_node, i);
-
- if (IS_ERR(clk)) {
- rc = PTR_ERR(clk);
- if (rc == -EPROBE_DEFER)
- goto err_out;
- break;
- }
- hpriv->clks[i] = clk;
- }
-
- hpriv->phy = devm_phy_get(dev, "sata-phy");
- if (IS_ERR(hpriv->phy)) {
- rc = PTR_ERR(hpriv->phy);
- switch (rc) {
- case -ENODEV:
- case -ENOSYS:
- /* continue normally */
- hpriv->phy = NULL;
- break;
-
- case -EPROBE_DEFER:
- goto err_out;
-
- default:
- dev_err(dev, "couldn't get sata-phy\n");
- goto err_out;
- }
- }
-
- pm_runtime_enable(dev);
- pm_runtime_get_sync(dev);
- hpriv->got_runtime_pm = true;
-
- devres_remove_group(dev, NULL);
- return hpriv;
-
-err_out:
- devres_release_group(dev, NULL);
- return ERR_PTR(rc);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
-
-/**
- * ahci_platform_init_host - Bring up an ahci-platform host
- * @pdev: platform device pointer for the host
- * @hpriv: ahci-host private data for the host
- * @pi_template: template for the ata_port_info to use
- * @force_port_map: param passed to ahci_save_initial_config
- * @mask_port_map: param passed to ahci_save_initial_config
- *
- * This function does all the usual steps needed to bring up an
- * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
- * must be initialized / enabled before calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_init_host(struct platform_device *pdev,
- struct ahci_host_priv *hpriv,
- const struct ata_port_info *pi_template,
- unsigned int force_port_map,
- unsigned int mask_port_map)
-{
- struct device *dev = &pdev->dev;
- struct ata_port_info pi = *pi_template;
- const struct ata_port_info *ppi[] = { &pi, NULL };
- struct ata_host *host;
- int i, irq, n_ports, rc;
-
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
- }
-
- /* prepare host */
- hpriv->flags |= (unsigned long)pi.private_data;
-
- ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
-
- if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ;
-
- if (hpriv->cap & HOST_CAP_PMP)
- pi.flags |= ATA_FLAG_PMP;
-
- ahci_set_em_messages(hpriv, &pi);
-
- /* CAP.NP sometimes indicate the index of the last enabled
- * port, at other times, that of the last possible port, so
- * determining the maximum port number requires looking at
- * both CAP.NP and port_map.
- */
- n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
- host = ata_host_alloc_pinfo(dev, ppi, n_ports);
- if (!host)
- return -ENOMEM;
-
- host->private_data = hpriv;
-
- if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
- host->flags |= ATA_HOST_PARALLEL_SCAN;
- else
- dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
-
- if (pi.flags & ATA_FLAG_EM)
- ahci_reset_em(host);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- ata_port_desc(ap, "mmio %pR",
- platform_get_resource(pdev, IORESOURCE_MEM, 0));
- ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
-
- /* set enclosure management message type */
- if (ap->flags & ATA_FLAG_EM)
- ap->em_message_type = hpriv->em_msg_type;
-
- /* disabled/not-implemented port */
- if (!(hpriv->port_map & (1 << i)))
- ap->ops = &ata_dummy_port_ops;
- }
-
- rc = ahci_reset_controller(host);
- if (rc)
- return rc;
-
- ahci_init_controller(host);
- ahci_print_info(host, "platform");
-
- return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
- &ahci_platform_sht);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_init_host);
-
static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -420,169 +68,6 @@ disable_resources:
return rc;
}
-static void ahci_host_stop(struct ata_host *host)
-{
- struct device *dev = host->dev;
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
-
- if (pdata && pdata->exit)
- pdata->exit(dev);
-
- ahci_platform_disable_resources(hpriv);
-}
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * ahci_platform_suspend_host - Suspend an ahci-platform host
- * @dev: device pointer for the host
- *
- * This function does all the usual steps needed to suspend an
- * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
- * must be disabled after calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_suspend_host(struct device *dev)
-{
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->mmio;
- u32 ctl;
-
- if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
- dev_err(dev, "firmware update required for suspend/resume\n");
- return -EIO;
- }
-
- /*
- * AHCI spec rev1.1 section 8.3.3:
- * Software must disable interrupts prior to requesting a
- * transition of the HBA to D3 state.
- */
- ctl = readl(mmio + HOST_CTL);
- ctl &= ~HOST_IRQ_EN;
- writel(ctl, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
-
- return ata_host_suspend(host, PMSG_SUSPEND);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
-
-/**
- * ahci_platform_resume_host - Resume an ahci-platform host
- * @dev: device pointer for the host
- *
- * This function does all the usual steps needed to resume an ahci-platform
- * host, note any necessary resources (ie clks, phy, etc.) must be
- * initialized / enabled before calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_resume_host(struct device *dev)
-{
- struct ata_host *host = dev_get_drvdata(dev);
- int rc;
-
- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
- if (rc)
- return rc;
-
- ahci_init_controller(host);
- }
-
- ata_host_resume(host);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
-
-/**
- * ahci_platform_suspend - Suspend an ahci-platform device
- * @dev: the platform device to suspend
- *
- * This function suspends the host associated with the device, followed by
- * disabling all the resources of the device.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_suspend(struct device *dev)
-{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
- rc = ahci_platform_suspend_host(dev);
- if (rc)
- return rc;
-
- if (pdata && pdata->suspend) {
- rc = pdata->suspend(dev);
- if (rc)
- goto resume_host;
- }
-
- ahci_platform_disable_resources(hpriv);
-
- return 0;
-
-resume_host:
- ahci_platform_resume_host(dev);
- return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_suspend);
-
-/**
- * ahci_platform_resume - Resume an ahci-platform device
- * @dev: the platform device to resume
- *
- * This function enables all the resources of the device followed by
- * resuming the host associated with the device.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_resume(struct device *dev)
-{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
- rc = ahci_platform_enable_resources(hpriv);
- if (rc)
- return rc;
-
- if (pdata && pdata->resume) {
- rc = pdata->resume(dev);
- if (rc)
- goto disable_resources;
- }
-
- rc = ahci_platform_resume_host(dev);
- if (rc)
- goto disable_resources;
-
- /* We resumed so update PM runtime state */
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
-
- return 0;
-
-disable_resources:
- ahci_platform_disable_resources(hpriv);
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_resume);
-#endif
-
static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
ahci_platform_resume);
new file mode 100644
@@ -0,0 +1,541 @@
+/*
+ * AHCI SATA platform library
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ * Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010 MontaVista Software, LLC.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
+#include "ahci.h"
+
+static void ahci_host_stop(struct ata_host *host);
+
+struct ata_port_operations ahci_platform_ops = {
+ .inherits = &ahci_ops,
+ .host_stop = ahci_host_stop,
+};
+EXPORT_SYMBOL_GPL(ahci_platform_ops);
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT("ahci_platform"),
+};
+
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the clks found in hpriv->clks, starting at
+ * index 0. If any clk fails to enable it disables all the clks already
+ * enabled in reverse order, and then returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
+{
+ int c, rc;
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+ rc = clk_prepare_enable(hpriv->clks[c]);
+ if (rc)
+ goto disable_unprepare_clk;
+ }
+ return 0;
+
+disable_unprepare_clk:
+ while (--c >= 0)
+ clk_disable_unprepare(hpriv->clks[c]);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
+
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all the clks found in hpriv->clks, in reverse
+ * order of ahci_platform_enable_clks (starting at the end of the array).
+ */
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+ int c;
+
+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+ if (hpriv->clks[c])
+ clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in the
+ * following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
+ *
+ * If resource enabling fails at any point the previous enabled resources
+ * are disabled in reverse order.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+{
+ int rc;
+
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ return rc;
+ }
+
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_regulator;
+
+ if (hpriv->phy) {
+ rc = phy_init(hpriv->phy);
+ if (rc)
+ goto disable_clks;
+
+ rc = phy_power_on(hpriv->phy);
+ if (rc) {
+ phy_exit(hpriv->phy);
+ goto disable_clks;
+ }
+ }
+
+ return 0;
+
+disable_clks:
+ ahci_platform_disable_clks(hpriv);
+
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in the
+ * following order:
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+ if (hpriv->phy) {
+ phy_power_off(hpriv->phy);
+ phy_exit(hpriv->phy);
+ }
+
+ ahci_platform_disable_clks(hpriv);
+
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
+static void ahci_platform_put_resources(struct device *dev, void *res)
+{
+ struct ahci_host_priv *hpriv = res;
+ int c;
+
+ if (hpriv->got_runtime_pm) {
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+ }
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+ clk_put(hpriv->clks[c]);
+}
+
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the following
+ * resources, storing a reference to them inside the returned struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ * or for non devicetree enabled platforms a single clock
+ * 4) phy (optional)
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct clk *clk;
+ int i, rc = -ENOMEM;
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
+
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
+
+ devres_add(dev, hpriv);
+
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ if (IS_ERR(hpriv->mmio)) {
+ dev_err(dev, "no mmio space\n");
+ rc = PTR_ERR(hpriv->mmio);
+ goto err_out;
+ }
+
+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+ if (IS_ERR(hpriv->target_pwr)) {
+ rc = PTR_ERR(hpriv->target_pwr);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ hpriv->target_pwr = NULL;
+ }
+
+ for (i = 0; i < AHCI_MAX_CLKS; i++) {
+ /*
+ * For now we must use clk_get(dev, NULL) for the first clock,
+ * because some platforms (da850, spear13xx) are not yet
+ * converted to use devicetree for clocks. For new platforms
+ * this is equivalent to of_clk_get(dev->of_node, 0).
+ */
+ if (i == 0)
+ clk = clk_get(dev, NULL);
+ else
+ clk = of_clk_get(dev->of_node, i);
+
+ if (IS_ERR(clk)) {
+ rc = PTR_ERR(clk);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ break;
+ }
+ hpriv->clks[i] = clk;
+ }
+
+ hpriv->phy = devm_phy_get(dev, "sata-phy");
+ if (IS_ERR(hpriv->phy)) {
+ rc = PTR_ERR(hpriv->phy);
+ switch (rc) {
+ case -ENODEV:
+ case -ENOSYS:
+ /* continue normally */
+ hpriv->phy = NULL;
+ break;
+
+ case -EPROBE_DEFER:
+ goto err_out;
+
+ default:
+ dev_err(dev, "couldn't get sata-phy\n");
+ goto err_out;
+ }
+ }
+
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+ hpriv->got_runtime_pm = true;
+
+ devres_remove_group(dev, NULL);
+ return hpriv;
+
+err_out:
+ devres_release_group(dev, NULL);
+ return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_port_info pi = *pi_template;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ata_host *host;
+ int i, irq, n_ports, rc;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
+
+ /* prepare host */
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
+ if (hpriv->cap & HOST_CAP_NCQ)
+ pi.flags |= ATA_FLAG_NCQ;
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ ahci_set_em_messages(hpriv, &pi);
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
+
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_desc(ap, "mmio %pR",
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = hpriv->em_msg_type;
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ ahci_print_info(host, "platform");
+
+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static void ahci_host_stop(struct ata_host *host)
+{
+ struct device *dev = host->dev;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+
+ if (pdata && pdata->exit)
+ pdata->exit(dev);
+
+ ahci_platform_disable_resources(hpriv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * ahci_platform_suspend_host - Suspend an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to suspend an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be disabled after calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+
+ if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_err(dev, "firmware update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ /*
+ * AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+
+ return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ * ahci_platform_resume_host - Resume an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to resume an ahci-platform
+ * host, note any necessary resources (ie clks, phy, etc.) must be
+ * initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ * ahci_platform_suspend - Suspend an ahci-platform device
+ * @dev: the platform device to suspend
+ *
+ * This function suspends the host associated with the device, followed by
+ * disabling all the resources of the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_suspend_host(dev);
+ if (rc)
+ return rc;
+
+ if (pdata && pdata->suspend) {
+ rc = pdata->suspend(dev);
+ if (rc)
+ goto resume_host;
+ }
+
+ ahci_platform_disable_resources(hpriv);
+
+ return 0;
+
+resume_host:
+ ahci_platform_resume_host(dev);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
+
+/**
+ * ahci_platform_resume - Resume an ahci-platform device
+ * @dev: the platform device to resume
+ *
+ * This function enables all the resources of the device followed by
+ * resuming the host associated with the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ if (pdata && pdata->resume) {
+ rc = pdata->resume(dev);
+ if (rc)
+ goto disable_resources;
+ }
+
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
+
+ /* We resumed so update PM runtime state */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
+#endif
+
+MODULE_DESCRIPTION("AHCI SATA platform library");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");