| Message ID | 1396967803-28868-4-git-send-email-gautam.vivek@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08.04.2014 16:36, Vivek Gautam wrote: > Add device tree nodes for DWC3 controller present on > Exynos 5420 SoC, to enable support for USB 3.0. > > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> > --- > arch/arm/boot/dts/exynos5420.dtsi | 34 ++++++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi > index a6efb52..20c2d0b 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -653,6 +653,23 @@ > clock-names = "tmu_apbif", "tmu_triminfo_apbif"; > }; > > + usb@12000000 { > + compatible = "samsung,exynos5250-dwusb3"; > + clocks = <&clock 366>; > + clock-names = "usbdrd30"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + dwc3 { > + compatible = "synopsys,dwc3"; > + reg = <0x12000000 0x10000>; > + interrupts = <0 72 0>; > + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > + > usbdrd_phy0: phy@12100000 { > compatible = "samsung,exynos5420-usbdrd-phy"; > reg = <0x12100000 0x100>; > @@ -663,6 +680,23 @@ > #phy-cells = <1>; > }; > > + usb@12400000 { > + compatible = "samsung,exynos5250-dwusb3"; > + clocks = <&clock 367>; > + clock-names = "usbdrd30"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + dwc3 { > + compatible = "synopsys,dwc3"; > + reg = <0x12400000 0x10000>; > + interrupts = <0 73 0>; > + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > + > usbdrd_phy1: phy@12500000 { > compatible = "samsung,exynos5420-usbdrd-phy"; > reg = <0x12500000 0x100>; > Reviewed-by: Tomasz Figa <t.figa@samsung.com> -- Best regards, Tomasz
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index a6efb52..20c2d0b 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -653,6 +653,23 @@ clock-names = "tmu_apbif", "tmu_triminfo_apbif"; }; + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock 366>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + usbdrd_phy0: phy@12100000 { compatible = "samsung,exynos5420-usbdrd-phy"; reg = <0x12100000 0x100>; @@ -663,6 +680,23 @@ #phy-cells = <1>; }; + usb@12400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock 367>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12400000 0x10000>; + interrupts = <0 73 0>; + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + usbdrd_phy1: phy@12500000 { compatible = "samsung,exynos5420-usbdrd-phy"; reg = <0x12500000 0x100>;
Add device tree nodes for DWC3 controller present on Exynos 5420 SoC, to enable support for USB 3.0. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> --- arch/arm/boot/dts/exynos5420.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)