@@ -14,6 +14,8 @@ Required properties:
for exynos4412/5250 controllers.
Must be "samsung,exynos-adc-v2" for
future controllers.
+ Must be "samsung,exynos-adc-v3" for
+ for exynos3250 controllers.
- reg: Contains ADC register address range (base address and
length) and the address of the phy enable register.
- interrupts: Contains the interrupt information for the timer. The
@@ -21,7 +23,11 @@ Required properties:
the Samsung device uses.
- #io-channel-cells = <1>; As ADC has multiple outputs
- clocks From common clock binding: handle to adc clock.
+ From common clock binding: handle to sclk_tsadc clock
+ if using Exynos3250.
- clock-names From common clock binding: Shall be "adc".
+ From common clock binding: Shall be "sclk_tsadc"
+ if using Exynos3250.
- vdd-supply VDD input supply.
Note: child nodes can be added for auto probing from device tree.
@@ -41,6 +47,20 @@ adc: adc@12D10000 {
vdd-supply = <&buck5_reg>;
};
+If Exynos3250 uses ADC,
+adc: adc@126C0000 {
+ compatible = "samsung,exynos-adc-v3";
+ reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+ interrupts = <0 137 0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ clock-names = "adc", "sclk_tsadc";
+ clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+
+ vdd-supply = <&buck5_reg>;
+};
+
Example: Adding child nodes in dts file
This patch add DT binding documentation for Exynos3250 ADC IP. Exynos3250 has special clock ('sclk_tsadc') for ADC which provide clock to internal ADC. Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> --- .../devicetree/bindings/arm/samsung/exynos-adc.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)