[2/7] ARM: tegra: venice2 - Enable HDMI

Commit Message

Thierry Reding April 25, 2014, 3:44 p.m. UTC

From: Thierry Reding <[e-mail]>

Add HDMI +5V, VDD and PLL regulators and enable the DDC I2C controller.
Enable the HDMI device, provide the power supplies as well as the DDC
adapter and use the standard pin (PN7) for hotplug detection.

Signed-off-by: Thierry Reding <[e-mail]>
---
 arch/arm/boot/dts/tegra124-venice2.dts | 37 ++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 6770e2bdf226..84a6ec039e1d 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -17,6 +17,18 @@ 
 	};
 
 	host1x@0,50000000 {
+		hdmi@0,54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
 		sor@0,54540000 {
 			status = "okay";
 
@@ -601,7 +613,7 @@ 
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000c700 {
+	hdmi_ddc: i2c@0,7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
@@ -700,7 +712,7 @@ 
 					regulator-boot-on;
 				};
 
-				sd4 {
+				vdd_1v05_run: sd4 {
 					regulator-name = "+1.05V_RUN";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
@@ -1147,6 +1159,27 @@ 
 			enable-active-high;
 			vin-supply = <&vdd_3v3_sys>;
 		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
 	};
 
 	sound {