diff mbox

ARM: dts: imx6q-udoo: Add HDMI support

Message ID 1399394059-21635-1-git-send-email-fabio.estevam@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Fabio Estevam May 6, 2014, 4:34 p.m. UTC
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/boot/dts/imx6q-udoo.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Shawn Guo May 8, 2014, 3:39 a.m. UTC | #1
On Tue, May 06, 2014 at 01:34:19PM -0300, Fabio Estevam wrote:
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-udoo.dts | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index ed397d1..5f2206a 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -28,6 +28,18 @@ 
 	status = "okay";
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
 &iomuxc {
 	imx6q-udoo {
 		pinctrl_enet: enetgrp {
@@ -51,6 +63,13 @@ 
 			>;
 		};
 
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
 		pinctrl_uart2: uart2grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1