diff mbox

[v3,6/6] ARM: EXYNOS: Refactoring to remove soc_is_exynos macros from exynos

Message ID 1399706419-13976-7-git-send-email-pankaj.dubey@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Pankaj Dubey May 10, 2014, 7:20 a.m. UTC
This patch enables chipid driver for ARCH_EXYNOS and refactors
machine code as well as exynos cpufreq driver code for using
chipid driver for identification of SoC ID and SoC rev.

This patch also updates DT binding information in exynos4 and
exynos5 dtsi file. As to differentiate product id bit-mask we need
separate compatible string for exynos4 and exynos5. Hoping this will
be helpful in future as bit-mask and bit-shift bit may differ.
Added binding information as well.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
 .../bindings/arm/samsung/exynos-chipid.txt         |   21 ++++++++
 arch/arm/Kconfig                                   |    1 +
 arch/arm/boot/dts/exynos4.dtsi                     |    2 +-
 arch/arm/boot/dts/exynos5.dtsi                     |    2 +-
 arch/arm/mach-exynos/exynos.c                      |   47 ++++------------
 arch/arm/mach-exynos/platsmp.c                     |   11 ++--
 arch/arm/mach-exynos/pm.c                          |   26 ++++-----
 arch/arm/plat-samsung/include/plat/cpu.h           |   57 --------------------
 drivers/clk/samsung/clk-exynos4.c                  |    2 +-
 drivers/cpufreq/exynos-cpufreq.c                   |    9 ++--
 drivers/cpufreq/exynos-cpufreq.h                   |    1 -
 drivers/cpufreq/exynos4x12-cpufreq.c               |    5 +-
 12 files changed, 61 insertions(+), 123 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt

Comments

Tomasz Figa June 10, 2014, 2:46 p.m. UTC | #1
Hi Pankaj,

On 10.05.2014 09:20, Pankaj Dubey wrote:
> This patch enables chipid driver for ARCH_EXYNOS and refactors
> machine code as well as exynos cpufreq driver code for using
> chipid driver for identification of SoC ID and SoC rev.
> 
> This patch also updates DT binding information in exynos4 and
> exynos5 dtsi file. As to differentiate product id bit-mask we need
> separate compatible string for exynos4 and exynos5. Hoping this will
> be helpful in future as bit-mask and bit-shift bit may differ.
> Added binding information as well.

[snip]

> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
> index d0482c2..9d6ec84 100644
> --- a/arch/arm/mach-exynos/platsmp.c
> +++ b/arch/arm/mach-exynos/platsmp.c
> @@ -20,13 +20,13 @@
>  #include <linux/smp.h>
>  #include <linux/io.h>
>  #include <linux/of_address.h>
> +#include <linux/exynos-soc.h>
>  
>  #include <asm/cacheflush.h>
>  #include <asm/smp_plat.h>
>  #include <asm/smp_scu.h>
>  #include <asm/firmware.h>
>  
> -#include <plat/cpu.h>
>  #include <mach/map.h>
>  
>  #include "common.h"
> @@ -59,7 +59,8 @@ static void __init exynos_smp_prepare_sram(void)
>  
>  static inline void __iomem *cpu_boot_reg_base(void)
>  {
> -	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
> +	if (is_soc_id_compatible(EXYNOS4210) &&
> +			is_soc_rev_compatible(EXYNOS4210_REV_1_1))

Well, how is this any better than what is already there? When adding a
new SoC, you will likely have to add another series of "||"s or "&&"s
with specific SoC IDs, when using this kind of API. This is not the point.

For now, all those things can be replaced simply with
of_machine_is_compatible() (except checks for samsung_rev()), but in the
end they need to be properly abstracted. The goal is to be able to add
support for new SoC, which requires identical steps to perform certain
things as already supported SoCs, without explicitly stating this in
driver code.

E.g. Exynos5250 is already supported, while Exynos5251 shows up. Let's
say it has exactly the same secondary CPU boot-up method as Exynos5250,
but to enter suspend mode, the same steps as on Exynos5260 have to be
performed. With any kind of per-SoC check API, you will have to add
soc_is_exynos5251() or is_soc_id_compatible(EXYNOS5251) in CPU bring-up
code and low-level suspend code, even though all the functional code is
already there.

Best regards,
Tomasz
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt
new file mode 100644
index 0000000..a496459
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt
@@ -0,0 +1,21 @@ 
+SAMSUNG Exynos4/Exynos5 SoCs Chipid driver.
+
+Required properties:
+- compatible : Should at least contain "samsung,exynos4210-chipid". More
+	specific compatible string specify which SoC version (exynos4 or
+	exynos5) are paired with.
+  Details:
+  samsung,exynos4-chipid: Exynos4 SoCs has Chip ID block that can provide
+	product id, revision number and package information.
+	It has different product-id bit-mask than Exynos5 series SoC.
+  samsung,exynos5-chipid: Exynos5 SoCs has Chip ID block that can provide
+	product id, revision number and package information.
+	It has different product-id bit-mask then Exynos4 series SoC.
+
+- reg: offset and length of the register set
+
+Example:
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid", "samsung,exynos4-chipid";
+		reg = <0x10000000 0x100>;
+	};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a4eac2f..06f14a4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -856,6 +856,7 @@  config ARCH_EXYNOS
 	select SRAM
 	select USE_OF
 	select MFD_SYSCON
+	select EXYNOS_CHIPID
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 2f8bcd0..d4c0657 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -46,7 +46,7 @@ 
 	};
 
 	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
+		compatible = "samsung,exynos4210-chipid", "samsung,exynos4-chipid";
 		reg = <0x10000000 0x100>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 3027e37..1d0b569 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -19,7 +19,7 @@ 
 	interrupt-parent = <&gic>;
 
 	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
+		compatible = "samsung,exynos4210-chipid", "samsung,exynos5-chipid";
 		reg = <0x10000000 0x100>;
 	};
 
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 9902e52..26f5e8c 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -21,6 +21,7 @@ 
 #include <linux/pm_domain.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
+#include <linux/exynos-soc.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -28,7 +29,6 @@ 
 #include <asm/mach/map.h>
 #include <asm/memory.h>
 
-#include <plat/cpu.h>
 #include <mach/map.h>
 
 #include "common.h"
@@ -171,29 +171,6 @@  static void __init exynos_init_late(void)
 	exynos_pm_init();
 }
 
-static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
-					int depth, void *data)
-{
-	struct map_desc iodesc;
-	__be32 *reg;
-	unsigned long len;
-
-	if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
-		!of_flat_dt_is_compatible(node, "samsung,exynos5440-clock"))
-		return 0;
-
-	reg = of_get_flat_dt_prop(node, "reg", &len);
-	if (reg == NULL || len != (sizeof(unsigned long) * 2))
-		return 0;
-
-	iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0]));
-	iodesc.length = be32_to_cpu(reg[1]) - 1;
-	iodesc.virtual = (unsigned long)S5P_VA_CHIPID;
-	iodesc.type = MT_DEVICE;
-	iotable_init(&iodesc, 1);
-	return 1;
-}
-
 static const struct of_device_id exynos_dt_pmu_match[] = {
 	{ .compatible = "samsung,exynos4210-pmu" },
 	{ .compatible = "samsung,exynos4212-pmu" },
@@ -202,25 +179,15 @@  static const struct of_device_id exynos_dt_pmu_match[] = {
 	{},
 };
 
-static void __init exynos_init_io(void)
-{
-	debug_ll_io_init();
-
-	of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
-
-	/* detect cpu id and rev. */
-	s5p_init_cpu(S5P_VA_CHIPID);
-}
-
 static void __init exynos5_init_io(void)
 {
-	exynos_init_io();
+	debug_ll_io_init();
 	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
 }
 
 static void __init exynos4_init_io(void)
 {
-	exynos_init_io();
+	debug_ll_io_init();
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 }
 
@@ -279,14 +246,18 @@  void __init exynos_map_pmu(void)
 
 static void __init exynos_dt_machine_init(void)
 {
+	struct device *parent;
+
 	exynos_map_pmu();
 
-	if (!soc_is_exynos5440())
+	parent = exynos_soc_device_init();
+
+	if (is_soc_id_compatible(EXYNOS5440))
 		platform_device_register(&exynos_cpuidle);
 
 	platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 }
 
 static char const *exynos4_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index d0482c2..9d6ec84 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -20,13 +20,13 @@ 
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/exynos-soc.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/firmware.h>
 
-#include <plat/cpu.h>
 #include <mach/map.h>
 
 #include "common.h"
@@ -59,7 +59,8 @@  static void __init exynos_smp_prepare_sram(void)
 
 static inline void __iomem *cpu_boot_reg_base(void)
 {
-	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
+	if (is_soc_id_compatible(EXYNOS4210) &&
+			is_soc_rev_compatible(EXYNOS4210_REV_1_1))
 		return pmu_base + S5P_INFORM5;
 
 	return sram_base_addr;
@@ -72,9 +73,10 @@  static inline void __iomem *cpu_boot_reg(int cpu)
 	boot_reg = cpu_boot_reg_base();
 	if (!boot_reg)
 		return ERR_PTR(-ENODEV);
-	if (soc_is_exynos4412())
+
+	if (is_soc_id_compatible(EXYNOS4412))
 		boot_reg += 4*cpu;
-	else if (soc_is_exynos5420())
+	else if (is_soc_id_compatible(EXYNOS5420))
 		boot_reg += 4;
 	return boot_reg;
 }
@@ -264,6 +266,7 @@  static void __init exynos_smp_init_cpus(void)
 static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
+	early_exynos_chipid_init();
 
 	pmu_base = pmu_base_addr();
 
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 59e5604..5cb5449 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -22,13 +22,13 @@ 
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/regmap.h>
+#include <linux/exynos-soc.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 
-#include <plat/cpu.h>
 #include <plat/pm-common.h>
 #include <plat/pll.h>
 #include <plat/regs-srom.h>
@@ -82,7 +82,7 @@  static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
 {
 	const struct exynos_wkup_irq *wkup_irq;
 
-	if (soc_is_exynos5250())
+	if (is_soc_id_compatible(EXYNOS5250))
 		wkup_irq = exynos5250_wkup_irq;
 	else
 		wkup_irq = exynos4_wkup_irq;
@@ -101,11 +101,11 @@  static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
 	return -ENOENT;
 }
 
-#define EXYNOS_BOOT_VECTOR_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+#define EXYNOS_BOOT_VECTOR_ADDR	(is_soc_rev_compatible(EXYNOS4210_REV_1_1) ? \
+			S5P_INFORM7 : (is_soc_rev_compatible(EXYNOS4210_REV_1_0) ? \
 			0x24 : S5P_INFORM0))
-#define EXYNOS_BOOT_VECTOR_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+#define EXYNOS_BOOT_VECTOR_FLAG	(is_soc_rev_compatible(EXYNOS4210_REV_1_1) ? \
+			S5P_INFORM6 : (is_soc_rev_compatible(EXYNOS4210_REV_1_0) ? \
 			0x20 : S5P_INFORM1))
 
 #define S5P_CHECK_AFTR  0xFCBA0D10
@@ -119,7 +119,7 @@  static void exynos_set_wakeupmask(long mask)
 
 static void exynos_cpu_set_boot_vector(long flags)
 {
-	if (samsung_rev() == EXYNOS4210_REV_1_0) {
+	if (is_soc_rev_compatible(EXYNOS4210_REV_1_0)) {
 		__raw_writel(virt_to_phys(exynos_cpu_resume),
 				S5P_VA_SYSRAM + EXYNOS_BOOT_VECTOR_ADDR);
 		__raw_writel(flags, S5P_VA_SYSRAM + EXYNOS_BOOT_VECTOR_FLAG);
@@ -183,7 +183,7 @@  static int exynos_cpu_suspend(unsigned long arg)
 	outer_flush_all();
 #endif
 
-	if (soc_is_exynos5250())
+	if (is_soc_id_compatible(EXYNOS5250))
 		flush_cache_all();
 
 	/* issue the standby signal into the pm unit. */
@@ -205,7 +205,7 @@  static void exynos_pm_prepare(void)
 
 	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	if (soc_is_exynos5250()) {
+	if (is_soc_id_compatible(EXYNOS5250)) {
 		/* Disable USE_RETENTION of JPEG_MEM_OPTION */
 		regmap_read(pmu_regmap, EXYNOS5_JPEG_MEM_OPTION, &tmp);
 		tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
@@ -243,7 +243,7 @@  static int exynos_pm_suspend(void)
 	tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
 	regmap_write(pmu_regmap, S5P_CENTRAL_SEQ_OPTION, tmp);
 
-	if (!soc_is_exynos5250())
+	if (!is_soc_id_compatible(EXYNOS5250))
 		exynos_cpu_save_register();
 
 	return 0;
@@ -277,7 +277,7 @@  static void exynos_pm_resume(void)
 	if (exynos_pm_central_resume())
 		goto early_wakeup;
 
-	if (!soc_is_exynos5250())
+	if (!is_soc_id_compatible(EXYNOS5250))
 		exynos_cpu_restore_register();
 
 	/* For release retention */
@@ -292,7 +292,7 @@  static void exynos_pm_resume(void)
 
 	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	if (!soc_is_exynos5250())
+	if (!is_soc_id_compatible(EXYNOS5250))
 		scu_enable(S5P_VA_SCU);
 
 early_wakeup:
@@ -385,7 +385,7 @@  static int exynos_cpu_pm_notifier(struct notifier_block *self,
 
 	case CPU_PM_EXIT:
 		if (cpu == 0) {
-			if (!soc_is_exynos5250())
+			if (!is_soc_id_compatible(EXYNOS5250))
 				scu_enable(S5P_VA_SCU);
 			exynos_cpu_restore_register();
 			exynos_pm_central_resume();
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 18a9a00..135471d 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -43,16 +43,6 @@  extern unsigned long samsung_cpu_id;
 #define S5PV210_CPU_ID		0x43110000
 #define S5PV210_CPU_MASK	0xFFFFF000
 
-#define EXYNOS4210_CPU_ID	0x43210000
-#define EXYNOS4212_CPU_ID	0x43220000
-#define EXYNOS4412_CPU_ID	0xE4412200
-#define EXYNOS4_CPU_MASK	0xFFFE0000
-
-#define EXYNOS5250_SOC_ID	0x43520000
-#define EXYNOS5420_SOC_ID	0xE5420000
-#define EXYNOS5440_SOC_ID	0xE5440000
-#define EXYNOS5_SOC_MASK	0xFFFFF000
-
 #define IS_SAMSUNG_CPU(name, id, mask)		\
 static inline int is_samsung_##name(void)	\
 {						\
@@ -68,12 +58,6 @@  IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
 IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -126,47 +110,6 @@  IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_s5pv210()	0
 #endif
 
-#if defined(CONFIG_CPU_EXYNOS4210)
-# define soc_is_exynos4210()	is_samsung_exynos4210()
-#else
-# define soc_is_exynos4210()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4212)
-# define soc_is_exynos4212()	is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
-# define soc_is_exynos4412()	is_samsung_exynos4412()
-#else
-# define soc_is_exynos4412()	0
-#endif
-
-#define EXYNOS4210_REV_0	(0x0)
-#define EXYNOS4210_REV_1_0	(0x10)
-#define EXYNOS4210_REV_1_1	(0x11)
-
-#if defined(CONFIG_SOC_EXYNOS5250)
-# define soc_is_exynos5250()	is_samsung_exynos5250()
-#else
-# define soc_is_exynos5250()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5420)
-# define soc_is_exynos5420()	is_samsung_exynos5420()
-#else
-# define soc_is_exynos5420()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5440)
-# define soc_is_exynos5440()	is_samsung_exynos5440()
-#else
-# define soc_is_exynos5440()	0
-#endif
-
-
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef KHZ
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index b4f9672..7b0ea1f 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -1030,7 +1030,7 @@  static unsigned long exynos4_get_xom(void)
 	void __iomem *chipid_base;
 	struct device_node *np;
 
-	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-chipid");
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4-chipid");
 	if (np) {
 		chipid_base = of_iomap(np, 0);
 
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index f99cfe2..5fe84a1 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -17,8 +17,7 @@ 
 #include <linux/regulator/consumer.h>
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
-
-#include <plat/cpu.h>
+#include <linux/exynos-soc.h>
 
 #include "exynos-cpufreq.h"
 
@@ -163,11 +162,11 @@  static int exynos_cpufreq_probe(struct platform_device *pdev)
 	if (!exynos_info)
 		return -ENOMEM;
 
-	if (soc_is_exynos4210())
+	if (is_soc_id_compatible(EXYNOS4210))
 		ret = exynos4210_cpufreq_init(exynos_info);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
+	else if (is_soc_id_compatible(EXYNOS4212) || is_soc_id_compatible(EXYNOS4412))
 		ret = exynos4x12_cpufreq_init(exynos_info);
-	else if (soc_is_exynos5250())
+	else if (is_soc_id_compatible(EXYNOS5250))
 		ret = exynos5250_cpufreq_init(exynos_info);
 	else
 		return 0;
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index 3ddade8..4201b6d 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -68,7 +68,6 @@  static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 }
 #endif
 
-#include <plat/cpu.h>
 #include <mach/map.h>
 
 #define EXYNOS4_CLKSRC_CPU			(S5P_VA_CMU + 0x14200)
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 466c76a..958d86f 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -16,6 +16,7 @@ 
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/exynos-soc.h>
 
 #include "exynos-cpufreq.h"
 
@@ -115,7 +116,7 @@  static void exynos4x12_set_clkdiv(unsigned int div_index)
 	tmp = apll_freq_4x12[div_index].clk_div_cpu1;
 
 	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
-	if (soc_is_exynos4212())
+	if (is_soc_id_compatible(EXYNOS4212))
 		stat_cpu1 = 0x11;
 	else
 		stat_cpu1 = 0x111;
@@ -184,7 +185,7 @@  int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 	if (IS_ERR(mout_apll))
 		goto err_mout_apll;
 
-	if (soc_is_exynos4212())
+	if (is_soc_id_compatible(EXYNOS4212))
 		apll_freq_4x12 = apll_freq_4212;
 	else
 		apll_freq_4x12 = apll_freq_4412;