| Message ID | 1399997646-4716-3-git-send-email-victor.kamensky@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 13/05/14 17:13, Victor Kamensky wrote: > The vgic h/w registers are little endian; when BE asm code > reads/writes from/to them, it needs to do byteswap after/before. > Byteswap code uses ARM_BE8 wrapper to add swap only if > CONFIG_CPU_BIG_ENDIAN is configured. > > Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> > Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> > --- > arch/arm/kvm/interrupts_head.S | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S > index 76af9302..e627858 100644 > --- a/arch/arm/kvm/interrupts_head.S > +++ b/arch/arm/kvm/interrupts_head.S > @@ -1,4 +1,5 @@ > #include <linux/irqchip/arm-gic.h> > +#include <asm/assembler.h> > > #define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) > #define VCPU_USR_SP (VCPU_USR_REG(13)) > @@ -420,6 +421,14 @@ vcpu .req r0 @ vcpu pointer always in r0 > ldr r8, [r2, #GICH_ELRSR0] > ldr r9, [r2, #GICH_ELRSR1] > ldr r10, [r2, #GICH_APR] > +ARM_BE8(rev r3, r3 ) > +ARM_BE8(rev r4, r4 ) > +ARM_BE8(rev r5, r5 ) > +ARM_BE8(rev r6, r6 ) > +ARM_BE8(rev r7, r7 ) > +ARM_BE8(rev r8, r8 ) > +ARM_BE8(rev r9, r9 ) > +ARM_BE8(rev r10, r10 ) > > str r3, [r11, #VGIC_CPU_HCR] > str r4, [r11, #VGIC_CPU_VMCR] > @@ -439,6 +448,7 @@ vcpu .req r0 @ vcpu pointer always in r0 > add r3, r11, #VGIC_CPU_LR > ldr r4, [r11, #VGIC_CPU_NR_LR] > 1: ldr r6, [r2], #4 > +ARM_BE8(rev r6, r6 ) > str r6, [r3], #4 > subs r4, r4, #1 > bne 1b > @@ -466,6 +476,9 @@ vcpu .req r0 @ vcpu pointer always in r0 > ldr r3, [r11, #VGIC_CPU_HCR] > ldr r4, [r11, #VGIC_CPU_VMCR] > ldr r8, [r11, #VGIC_CPU_APR] > +ARM_BE8(rev r3, r3 ) > +ARM_BE8(rev r4, r4 ) > +ARM_BE8(rev r8, r8 ) > > str r3, [r2, #GICH_HCR] > str r4, [r2, #GICH_VMCR] > @@ -476,6 +489,7 @@ vcpu .req r0 @ vcpu pointer always in r0 > add r3, r11, #VGIC_CPU_LR > ldr r4, [r11, #VGIC_CPU_NR_LR] > 1: ldr r6, [r3], #4 > +ARM_BE8(rev r6, r6 ) > str r6, [r2], #4 > subs r4, r4, #1 > bne 1b > Acked-by: Marc Zyngier <marc.zyngier@arm.com> M.
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S index 76af9302..e627858 100644 --- a/arch/arm/kvm/interrupts_head.S +++ b/arch/arm/kvm/interrupts_head.S @@ -1,4 +1,5 @@ #include <linux/irqchip/arm-gic.h> +#include <asm/assembler.h> #define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) #define VCPU_USR_SP (VCPU_USR_REG(13)) @@ -420,6 +421,14 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r8, [r2, #GICH_ELRSR0] ldr r9, [r2, #GICH_ELRSR1] ldr r10, [r2, #GICH_APR] +ARM_BE8(rev r3, r3 ) +ARM_BE8(rev r4, r4 ) +ARM_BE8(rev r5, r5 ) +ARM_BE8(rev r6, r6 ) +ARM_BE8(rev r7, r7 ) +ARM_BE8(rev r8, r8 ) +ARM_BE8(rev r9, r9 ) +ARM_BE8(rev r10, r10 ) str r3, [r11, #VGIC_CPU_HCR] str r4, [r11, #VGIC_CPU_VMCR] @@ -439,6 +448,7 @@ vcpu .req r0 @ vcpu pointer always in r0 add r3, r11, #VGIC_CPU_LR ldr r4, [r11, #VGIC_CPU_NR_LR] 1: ldr r6, [r2], #4 +ARM_BE8(rev r6, r6 ) str r6, [r3], #4 subs r4, r4, #1 bne 1b @@ -466,6 +476,9 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r3, [r11, #VGIC_CPU_HCR] ldr r4, [r11, #VGIC_CPU_VMCR] ldr r8, [r11, #VGIC_CPU_APR] +ARM_BE8(rev r3, r3 ) +ARM_BE8(rev r4, r4 ) +ARM_BE8(rev r8, r8 ) str r3, [r2, #GICH_HCR] str r4, [r2, #GICH_VMCR] @@ -476,6 +489,7 @@ vcpu .req r0 @ vcpu pointer always in r0 add r3, r11, #VGIC_CPU_LR ldr r4, [r11, #VGIC_CPU_NR_LR] 1: ldr r6, [r3], #4 +ARM_BE8(rev r6, r6 ) str r6, [r2], #4 subs r4, r4, #1 bne 1b