Message ID | 1400517811-24668-9-git-send-email-sebastian.hesselbarth@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 19/05/2014 at 18:43:29 +0200, Sebastian Hesselbarth wrote : > This converts Berlin BG2CD SoC dtsi to make use of the new DT clock > nodes for Berlin SoCs. Also add a binding include to ease core clock > references. > > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > --- > Changelog: > v1->v2: > - adapt to new single chip control node and compatible > > Cc: Mike Turquette <mturquette@linaro.org> > Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> > Cc: Jisheng Zhang <jszhang@marvell.com> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > arch/arm/boot/dts/berlin2cd.dtsi | 53 ++++++++++++++++++---------------------- > 1 file changed, 24 insertions(+), 29 deletions(-) > > diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi > index 6eb1bdae23ac..1385caa6d029 100644 > --- a/arch/arm/boot/dts/berlin2cd.dtsi > +++ b/arch/arm/boot/dts/berlin2cd.dtsi > @@ -12,6 +12,7 @@ > */ > > #include "skeleton.dtsi" > +#include <dt-bindings/clock/berlin2.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > / { > @@ -30,24 +31,10 @@ > }; > }; > > - clocks { > - smclk: sysmgr-clock { > - compatible = "fixed-clock"; > - #clock-cells = <0>; > - clock-frequency = <25000000>; > - }; > - > - cfgclk: cfg-clock { > - compatible = "fixed-clock"; > - #clock-cells = <0>; > - clock-frequency = <75000000>; > - }; > - > - sysclk: system-clock { > - compatible = "fixed-clock"; > - #clock-cells = <0>; > - clock-frequency = <300000000>; > - }; > + refclk: oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <25000000>; > }; > > soc { > @@ -76,7 +63,7 @@ > compatible = "arm,cortex-a9-twd-timer"; > reg = <0xad0600 0x20>; > interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&sysclk>; > + clocks = <&chip CLKID_TWD>; > }; > > apb@e80000 { > @@ -163,7 +150,7 @@ > compatible = "snps,dw-apb-timer"; > reg = <0x2c00 0x14>; > interrupts = <8>; > - clocks = <&cfgclk>; > + clocks = <&chip CLKID_CFG>; > clock-names = "timer"; > status = "okay"; > }; > @@ -172,7 +159,7 @@ > compatible = "snps,dw-apb-timer"; > reg = <0x2c14 0x14>; > interrupts = <9>; > - clocks = <&cfgclk>; > + clocks = <&chip CLKID_CFG>; > clock-names = "timer"; > status = "okay"; > }; > @@ -181,7 +168,7 @@ > compatible = "snps,dw-apb-timer"; > reg = <0x2c28 0x14>; > interrupts = <10>; > - clocks = <&cfgclk>; > + clocks = <&chip CLKID_CFG>; > clock-names = "timer"; > status = "disabled"; > }; > @@ -190,7 +177,7 @@ > compatible = "snps,dw-apb-timer"; > reg = <0x2c3c 0x14>; > interrupts = <11>; > - clocks = <&cfgclk>; > + clocks = <&chip CLKID_CFG>; > clock-names = "timer"; > status = "disabled"; > }; > @@ -199,7 +186,7 @@ > compatible = "snps,dw-apb-timer"; > reg = <0x2c50 0x14>; > interrupts = <12>; > - clocks = <&cfgclk>; > + clocks = <&chip CLKID_CFG>; > clock-names = "timer"; > status = "disabled"; > }; > @@ -208,7 +195,7 @@ > compatible = "snps,dw-apb-timer"; > reg = <0x2c64 0x14>; > interrupts = <13>; > - clocks = <&cfgclk>; > + clocks = <&chip CLKID_CFG>; > clock-names = "timer"; > status = "disabled"; > }; > @@ -217,7 +204,7 @@ > compatible = "snps,dw-apb-timer"; > reg = <0x2c78 0x14>; > interrupts = <14>; > - clocks = <&cfgclk>; > + clocks = <&chip CLKID_CFG>; > clock-names = "timer"; > status = "disabled"; > }; > @@ -226,7 +213,7 @@ > compatible = "snps,dw-apb-timer"; > reg = <0x2c8c 0x14>; > interrupts = <15>; > - clocks = <&cfgclk>; > + clocks = <&chip CLKID_CFG>; > clock-names = "timer"; > status = "disabled"; > }; > @@ -241,6 +228,14 @@ > }; > }; > > + chip: chip-control@ea0000 { > + compatible = "marvell,berlin2cd-chip-ctrl"; > + #clock-cells = <1>; > + reg = <0xea0000 0x400>; > + clocks = <&refclk>; > + clock-names = "refclk"; > + }; > + > apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -285,7 +280,7 @@ > reg-shift = <2>; > reg-io-width = <1>; > interrupts = <8>; > - clocks = <&smclk>; > + clocks = <&refclk>; > status = "disabled"; > }; > > @@ -295,7 +290,7 @@ > reg-shift = <2>; > reg-io-width = <1>; > interrupts = <9>; > - clocks = <&smclk>; > + clocks = <&refclk>; > status = "disabled"; > }; > > -- > 1.9.1 >
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 6eb1bdae23ac..1385caa6d029 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/clock/berlin2.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -30,24 +31,10 @@ }; }; - clocks { - smclk: sysmgr-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - cfgclk: cfg-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - sysclk: system-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <300000000>; - }; + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; soc { @@ -76,7 +63,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; + clocks = <&chip CLKID_TWD>; }; apb@e80000 { @@ -163,7 +150,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -172,7 +159,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -181,7 +168,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -190,7 +177,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -199,7 +186,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -208,7 +195,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -217,7 +204,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -226,7 +213,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -241,6 +228,14 @@ }; }; + chip: chip-control@ea0000 { + compatible = "marvell,berlin2cd-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -285,7 +280,7 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <8>; - clocks = <&smclk>; + clocks = <&refclk>; status = "disabled"; }; @@ -295,7 +290,7 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <9>; - clocks = <&smclk>; + clocks = <&refclk>; status = "disabled"; };
This converts Berlin BG2CD SoC dtsi to make use of the new DT clock nodes for Berlin SoCs. Also add a binding include to ease core clock references. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Changelog: v1->v2: - adapt to new single chip control node and compatible Cc: Mike Turquette <mturquette@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jisheng Zhang <jszhang@marvell.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/berlin2cd.dtsi | 53 ++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 29 deletions(-)