[RESEND,v2,2/3] Documentation: devicetree: add Broadcom GISB arbiter bindings

Commit Message

Florian Fainelli May 19, 2014, 8:06 p.m. UTC

This patch adds the Broadcom GISB arbiter Device Tree binding that is
used on all Broadcom Set-top-box System-on-a-chip.

Signed-off-by: Florian Fainelli <[e-mail]>
---
Changes in v2:
- respin

 .../devicetree/bindings/bus/brcm,gisb-arb.txt      | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt

Patch

diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
new file mode 100644
index 000000000000..e2d501d20c9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
@@ -0,0 +1,30 @@ 
+Broadcom GISB bus Arbiter controller
+
+Required properties:
+
+- compatible: should be "brcm,gisb-arb"
+- reg: specifies the base physical address and size of the registers
+- interrupt-parent: specifies the phandle to the parent interrupt controller
+  this arbiter gets interrupt line from
+- interrupts: specifies the two interrupts (timeout and TEA) to be used from
+  the parent interrupt controller
+
+Optional properties:
+
+- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
+  masters are valid at the system level
+- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
+  masters. Should match the number of bits set in brcm,gisb-master-mask and
+  the order in which they appear
+
+Example:
+
+gisb-arb@f0400000 {
+	compatible = "brcm,gisb-arb";
+	reg = <0xf0400000 0x800>;
+	interrupts = <0>, <2>;
+	interrupt-parent = <&sun_l2_intc>;
+
+	brcm,gisb-arb-master-mask = <0x7>;
+	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+};