[1/2] serial: imx: remove the DMA wait queue

Commit Message

Huang Shijie May 23, 2014, 4:32 a.m. UTC

The DMA wait queue makes the code very complicated:
  For RX, the @->stop_rx hook does not really stop the RX;
  For TX, the @->stop_tx hook does not really stop the TX.

The above make the imx_shutdown has to wait the RX/TX DMA to be finished.

In order to make code more simple, this patch removes the DMA wait queue.
By calling the dmaengine_terminate_all, this patch makes the RX stops
immediately after we call the @->stop_rx hook, so does the TX.

Signed-off-by: Huang Shijie <[e-mail]>
---
 drivers/tty/serial/imx.c |   42 ++++++++++++++----------------------------
 1 files changed, 14 insertions(+), 28 deletions(-)

Patch

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index d1f16d3..ed6cdf7 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -225,7 +225,6 @@  struct imx_port {
 	void			*rx_buf;
 	unsigned int		tx_bytes;
 	unsigned int		dma_tx_nents;
-	wait_queue_head_t	dma_wait;
 	unsigned int            saved_reg[11];
 };
 
@@ -417,12 +416,10 @@  static void imx_stop_tx(struct uart_port *port)
 		return;
 	}
 
-	/*
-	 * We are maybe in the SMP context, so if the DMA TX thread is running
-	 * on other cpu, we have to wait for it to finish.
-	 */
-	if (sport->dma_is_enabled && sport->dma_is_txing)
-		return;
+	if (sport->dma_is_enabled && sport->dma_is_txing) {
+		dmaengine_terminate_all(sport->dma_chan_tx);
+		sport->dma_is_txing = 0;
+	}
 
 	temp = readl(sport->port.membase + UCR1);
 	writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
@@ -436,12 +433,10 @@  static void imx_stop_rx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
-	/*
-	 * We are maybe in the SMP context, so if the DMA TX thread is running
-	 * on other cpu, we have to wait for it to finish.
-	 */
-	if (sport->dma_is_enabled && sport->dma_is_rxing)
-		return;
+	if (sport->dma_is_enabled && sport->dma_is_rxing) {
+		dmaengine_terminate_all(sport->dma_chan_rx);
+		sport->dma_is_rxing = 0;
+	}
 
 	temp = readl(sport->port.membase + UCR2);
 	writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2);
@@ -498,12 +493,6 @@  static void dma_tx_callback(void *data)
 	dev_dbg(sport->port.dev, "we finish the TX DMA.\n");
 
 	uart_write_wakeup(&sport->port);
-
-	if (waitqueue_active(&sport->dma_wait)) {
-		wake_up(&sport->dma_wait);
-		dev_dbg(sport->port.dev, "exit in %s.\n", __func__);
-		return;
-	}
 }
 
 static void imx_dma_tx(struct imx_port *sport)
@@ -876,10 +865,6 @@  static void imx_rx_dma_done(struct imx_port *sport)
 	writel(temp, sport->port.membase + UCR1);
 
 	sport->dma_is_rxing = 0;
-
-	/* Is the shutdown waiting for us? */
-	if (waitqueue_active(&sport->dma_wait))
-		wake_up(&sport->dma_wait);
 }
 
 /*
@@ -1026,8 +1011,6 @@  static void imx_enable_dma(struct imx_port *sport)
 {
 	unsigned long temp;
 
-	init_waitqueue_head(&sport->dma_wait);
-
 	/* set UCR1 */
 	temp = readl(sport->port.membase + UCR1);
 	temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN |
@@ -1219,10 +1202,13 @@  static void imx_shutdown(struct uart_port *port)
 	unsigned long flags;
 
 	if (sport->dma_is_enabled) {
-		/* We have to wait for the DMA to finish. */
-		wait_event(sport->dma_wait,
-			!sport->dma_is_rxing && !sport->dma_is_txing);
+		/*
+		 * The upper layer may does not call the @->stop_tx and
+		 * @->stop_rx, so we call them ourselves.
+		 */
+		imx_stop_tx(port);
 		imx_stop_rx(port);
+
 		imx_disable_dma(sport);
 		imx_uart_dma_exit(sport);
 	}