@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5260-xyref5260.dtb \
+ exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
new file mode 100644
@@ -0,0 +1,82 @@
+/*
+ * SAMSUNG SMDK5410 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+/ {
+ model = "Samsung SMDK5410 board based on EXYNOS5410";
+ compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC2,115200";
+ };
+
+ fin_pll: xxti {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
+ firmware@02037000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02037000 0x1000>;
+ };
+
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,206 @@
+/*
+ * SAMSUNG EXYNOS5410 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
+ * EXYNOS5410 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos5410.h>
+
+/ {
+ compatible = "samsung,exynos5410", "samsung,exynos5";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x1>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x2>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x3>;
+ };
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ combiner: interrupt-controller@10440000 {
+ compatible = "samsung,exynos4210-combiner";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ samsung,combiner-nr = <32>;
+ reg = <0x10440000 0x1000>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+ <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+ <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+ <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ };
+
+ gic: interrupt-controller@10481000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10481000 0x1000>,
+ <0x10482000 0x1000>,
+ <0x10484000 0x2000>,
+ <0x10486000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ chipid@10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ mct: mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0xB00>;
+ interrupt-parent = <&interrupt_map>;
+ interrupts = <0>, <1>, <2>, <3>,
+ <4>, <5>, <6>, <7>,
+ <8>, <9>, <10>, <11>;
+ clocks = <&fin_pll>, <&clock CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+
+ interrupt_map: interrupt-map {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &combiner 23 3>,
+ <1 &combiner 23 4>,
+ <2 &combiner 25 2>,
+ <3 &combiner 25 3>,
+ <4 &gic 0 120 0>,
+ <5 &gic 0 121 0>,
+ <6 &gic 0 122 0>,
+ <7 &gic 0 123 0>,
+ <8 &gic 0 128 0>,
+ <9 &gic 0 129 0>,
+ <10 &gic 0 130 0>,
+ <11 &gic 0 131 0>;
+ };
+ };
+
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x54000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x54000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@53000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x53000 0x1000>;
+ };
+ };
+
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5410-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+ mmc_0: mmc@12200000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
+
+ mmc_1: mmc@12210000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12210000 0x1000>;
+ interrupts = <0 76 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
+
+ mmc_2: mmc@12220000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12220000 0x1000>;
+ interrupts = <0 77 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
+
+ uart0: serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ uart1: serial@12C10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C10000 0x100>;
+ interrupts = <0 52 0>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ uart2: serial@12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C20000 0x100>;
+ interrupts = <0 53 0>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+ };
+};