diff mbox

[v2,2/2] ARM: dts: mvebu: split SolidRun CuBox into variants

Message ID 1401228006-3212-1-git-send-email-sebastian.hesselbarth@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Sebastian Hesselbarth May 27, 2014, 10 p.m. UTC 
As Mainlining effort for SolidRun CuBox has been carried out on the
Engineering Sample, the board DTS was reflecting this. Actually,
SolidRun CuBox comes in three different variants:
Engineering Sample (ES), production with 1GB RAM (1G),
and production with 2GB RAM (2G).

Therefore, we base current dove-cubox.dts on to the 1G production
variant and add a ES dts to add required quirk for misrouted SDHCI
card detect on top of dove-cubox.dts. For the 2G variant we rely on
the bootloader to setup correct RAM size.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Changelog:
v1->v2:
- drop 2G board dts and rely on bootloader (Suggested by Jason Cooper)
- rework board files to allow to include 1G into ES and add quirks only

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/Makefile          |  1 +
 arch/arm/boot/dts/dove-cubox-es.dts | 12 ++++++++++++
 arch/arm/boot/dts/dove-cubox.dts    |  3 ---
 3 files changed, 13 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/dove-cubox-es.dts
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35c146f31e46..e7fec04e659d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -405,6 +405,7 @@  dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
+	dove-cubox-es.dtb \
 	dove-d2plug.dtb \
 	dove-d3plug.dtb \
 	dove-dove-db.dtb
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts
new file mode 100644
index 000000000000..e28ef056dd17
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox-es.dts
@@ -0,0 +1,12 @@ 
+#include "dove-cubox.dts"
+
+/ {
+	model = "SolidRun CuBox (Engineering Sample)";
+	compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
+};
+
+&sdio0 {
+	/* sdio0 card detect is connected to wrong pin on CuBox ES */
+	cd-gpios = <&gpio0 12 1>;
+	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 7a70f4ca502a..aae7efc09b0b 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -111,9 +111,6 @@ 
 
 &sdio0 {
 	status = "okay";
-	/* sdio0 card detect is connected to wrong pin on CuBox */
-	cd-gpios = <&gpio0 12 1>;
-	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
 };
 
 &spi0 {