| Message ID | 1401516095-31020-1-git-send-email-shc_work@mail.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, May 31, 2014 at 10:01:30AM +0400, Alexander Shiyan wrote: > Use generic irqchip_init() DT call to initialize IRQs, so after this patch, > the mxc-avic driver is quite prepared to move to drivers/irqchip. What's the whole plan of the moving? IOW, what's left after this patch and what's the plan for those? > As a temporary solution to do it, we use OF_DECLARE_2() I do not see OF_DECLARE_2() is defined anywhere? > instead of IRQCHIP_DECLARE(). > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> The patch number in the subject is confusing. There are 6 patches in the series rather than 3. Shawn > --- > arch/arm/mach-imx/avic.c | 29 ++++++++++++++++++++++------- > arch/arm/mach-imx/imx25-dt.c | 1 - > arch/arm/mach-imx/imx27-dt.c | 1 - > arch/arm/mach-imx/imx31-dt.c | 1 - > arch/arm/mach-imx/imx35-dt.c | 3 ++- > 5 files changed, 24 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c > index 24b103c..9adcad2 100644 > --- a/arch/arm/mach-imx/avic.c > +++ b/arch/arm/mach-imx/avic.c > @@ -22,6 +22,7 @@ > #include <linux/irqdomain.h> > #include <linux/io.h> > #include <linux/of.h> > +#include <linux/of_address.h> > #include <asm/mach/irq.h> > #include <asm/exception.h> > > @@ -153,13 +154,10 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) > * interrupts. It registers the interrupt enable and disable functions > * to the kernel for each interrupt source. > */ > -void __init mxc_init_irq(void __iomem *irqbase) > +static void __init _avic_init_irq(struct device_node *np) > { > - struct device_node *np; > int irq_base; > - int i; > - > - avic_base = irqbase; > + unsigned i; > > /* put the AVIC into the reset value with > * all interrupts disabled > @@ -178,7 +176,6 @@ void __init mxc_init_irq(void __iomem *irqbase) > irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); > WARN_ON(irq_base < 0); > > - np = of_find_compatible_node(NULL, NULL, "fsl,avic"); > domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0, > &irq_domain_simple_ops, NULL); > WARN_ON(!domain); > @@ -196,6 +193,24 @@ void __init mxc_init_irq(void __iomem *irqbase) > /* Initialize FIQ */ > init_FIQ(FIQ_START); > #endif > +} > + > +void __init mxc_init_irq(void __iomem *irqbase) > +{ > + avic_base = irqbase; > + > + _avic_init_irq(NULL); > +} > > - printk(KERN_INFO "MXC IRQ initialized\n"); > +static int __init avic_init_irq_dt(struct device_node *np, > + struct device_node *parent) > +{ > + avic_base = of_iomap(np, 0); > + if (!avic_base) > + return -ENOMEM; > + > + _avic_init_irq(np); > + > + return 0; > } > +OF_DECLARE_2(irqchip, mxc_avic, "fsl,avic", avic_init_irq_dt); > diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c > index 42a65e0..2f97743 100644 > --- a/arch/arm/mach-imx/imx25-dt.c > +++ b/arch/arm/mach-imx/imx25-dt.c > @@ -37,7 +37,6 @@ static void __init imx25_timer_init(void) > DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") > .map_io = mx25_map_io, > .init_early = imx25_init_early, > - .init_irq = mx25_init_irq, > .init_time = imx25_timer_init, > .init_machine = imx25_dt_init, > .dt_compat = imx25_dt_board_compat, > diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c > index 17bd405..09c577c 100644 > --- a/arch/arm/mach-imx/imx27-dt.c > +++ b/arch/arm/mach-imx/imx27-dt.c > @@ -42,7 +42,6 @@ static void __init imx27_timer_init(void) > DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") > .map_io = mx27_map_io, > .init_early = imx27_init_early, > - .init_irq = mx27_init_irq, > .init_time = imx27_timer_init, > .init_machine = imx27_dt_init, > .dt_compat = imx27_dt_board_compat, > diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c > index 581f4d6..6e7a4c2 100644 > --- a/arch/arm/mach-imx/imx31-dt.c > +++ b/arch/arm/mach-imx/imx31-dt.c > @@ -38,7 +38,6 @@ static void __init imx31_dt_timer_init(void) > DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") > .map_io = mx31_map_io, > .init_early = imx31_init_early, > - .init_irq = mx31_init_irq, > .init_time = imx31_dt_timer_init, > .init_machine = imx31_dt_init, > .dt_compat = imx31_dt_board_compat, > diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c > index a62854c..6b74123 100644 > --- a/arch/arm/mach-imx/imx35-dt.c > +++ b/arch/arm/mach-imx/imx35-dt.c > @@ -9,6 +9,7 @@ > */ > > #include <linux/irq.h> > +#include <linux/irqchip.h> > #include <linux/irqdomain.h> > #include <linux/of_irq.h> > #include <linux/of_platform.h> > @@ -31,7 +32,7 @@ static void __init imx35_dt_init(void) > static void __init imx35_irq_init(void) > { > imx_init_l2cache(); > - mx35_init_irq(); > + irqchip_init(); > } > > static const char *imx35_dt_board_compat[] __initconst = { > -- > 1.8.5.5 >
Mon, 2 Jun 2014 10:21:21 +0800 ?? Shawn Guo <shawn.guo@freescale.com>: > On Sat, May 31, 2014 at 10:01:30AM +0400, Alexander Shiyan wrote: > > Use generic irqchip_init() DT call to initialize IRQs, so after this patch, > > the mxc-avic driver is quite prepared to move to drivers/irqchip. > > What's the whole plan of the moving? IOW, what's left after this patch > and what's the plan for those? For the full movement of these drivers into drivers/irqchip, we need to find a solution for i.MX specific functions, such as mxc_set_irq_fiq() and tzic_enable_wake(). I haven't found a good solution yet... > > As a temporary solution to do it, we use OF_DECLARE_2() > > I do not see OF_DECLARE_2() is defined anywhere? <include/linux/of.h> ---
Mon, 2 Jun 2014 10:21:21 +0800 ?? Shawn Guo <shawn.guo@freescale.com>: > On Sat, May 31, 2014 at 10:01:30AM +0400, Alexander Shiyan wrote: > > Use generic irqchip_init() DT call to initialize IRQs, so after this patch, > > the mxc-avic driver is quite prepared to move to drivers/irqchip. ... > The patch number in the subject is confusing. There are 6 patches in > the series rather than 3. This is a separate series of three patches for AVIC and similar series for TZIC. You want me to combine them into one? ---
On Mon, Jun 02, 2014 at 09:09:27AM +0400, Alexander Shiyan wrote: > Mon, 2 Jun 2014 10:21:21 +0800 ?? Shawn Guo <shawn.guo@freescale.com>: > > On Sat, May 31, 2014 at 10:01:30AM +0400, Alexander Shiyan wrote: > > > Use generic irqchip_init() DT call to initialize IRQs, so after this patch, > > > the mxc-avic driver is quite prepared to move to drivers/irqchip. > ... > > > The patch number in the subject is confusing. There are 6 patches in > > the series rather than 3. > > This is a separate series of three patches for AVIC and similar series for TZIC. > You want me to combine them into one? As all other 5 patches are in reply to the first one [1], I thought they are just one series. Shawn [1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/330129
On Mon, Jun 02, 2014 at 08:24:34AM +0400, Alexander Shiyan wrote: > Mon, 2 Jun 2014 10:21:21 +0800 ?? Shawn Guo <shawn.guo@freescale.com>: > > On Sat, May 31, 2014 at 10:01:30AM +0400, Alexander Shiyan wrote: > > > Use generic irqchip_init() DT call to initialize IRQs, so after this patch, > > > the mxc-avic driver is quite prepared to move to drivers/irqchip. > > > > What's the whole plan of the moving? IOW, what's left after this patch > > and what's the plan for those? > > For the full movement of these drivers into drivers/irqchip, we need to find a > solution for i.MX specific functions, such as mxc_set_irq_fiq() and > tzic_enable_wake(). I haven't found a good solution yet... > > > > As a temporary solution to do it, we use OF_DECLARE_2() > > > > I do not see OF_DECLARE_2() is defined anywhere? > > <include/linux/of.h> The <include/linux/of.h> on my tree doesn't have it yet. So I cannot apply it for now anyway. Shawn
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 24b103c..9adcad2 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -22,6 +22,7 @@ #include <linux/irqdomain.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> #include <asm/mach/irq.h> #include <asm/exception.h> @@ -153,13 +154,10 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) * interrupts. It registers the interrupt enable and disable functions * to the kernel for each interrupt source. */ -void __init mxc_init_irq(void __iomem *irqbase) +static void __init _avic_init_irq(struct device_node *np) { - struct device_node *np; int irq_base; - int i; - - avic_base = irqbase; + unsigned i; /* put the AVIC into the reset value with * all interrupts disabled @@ -178,7 +176,6 @@ void __init mxc_init_irq(void __iomem *irqbase) irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); WARN_ON(irq_base < 0); - np = of_find_compatible_node(NULL, NULL, "fsl,avic"); domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0, &irq_domain_simple_ops, NULL); WARN_ON(!domain); @@ -196,6 +193,24 @@ void __init mxc_init_irq(void __iomem *irqbase) /* Initialize FIQ */ init_FIQ(FIQ_START); #endif +} + +void __init mxc_init_irq(void __iomem *irqbase) +{ + avic_base = irqbase; + + _avic_init_irq(NULL); +} - printk(KERN_INFO "MXC IRQ initialized\n"); +static int __init avic_init_irq_dt(struct device_node *np, + struct device_node *parent) +{ + avic_base = of_iomap(np, 0); + if (!avic_base) + return -ENOMEM; + + _avic_init_irq(np); + + return 0; } +OF_DECLARE_2(irqchip, mxc_avic, "fsl,avic", avic_init_irq_dt); diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 42a65e0..2f97743 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -37,7 +37,6 @@ static void __init imx25_timer_init(void) DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .map_io = mx25_map_io, .init_early = imx25_init_early, - .init_irq = mx25_init_irq, .init_time = imx25_timer_init, .init_machine = imx25_dt_init, .dt_compat = imx25_dt_board_compat, diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 17bd405..09c577c 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -42,7 +42,6 @@ static void __init imx27_timer_init(void) DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, - .init_irq = mx27_init_irq, .init_time = imx27_timer_init, .init_machine = imx27_dt_init, .dt_compat = imx27_dt_board_compat, diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 581f4d6..6e7a4c2 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -38,7 +38,6 @@ static void __init imx31_dt_timer_init(void) DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, - .init_irq = mx31_init_irq, .init_time = imx31_dt_timer_init, .init_machine = imx31_dt_init, .dt_compat = imx31_dt_board_compat, diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c index a62854c..6b74123 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/imx35-dt.c @@ -9,6 +9,7 @@ */ #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of_irq.h> #include <linux/of_platform.h> @@ -31,7 +32,7 @@ static void __init imx35_dt_init(void) static void __init imx35_irq_init(void) { imx_init_l2cache(); - mx35_init_irq(); + irqchip_init(); } static const char *imx35_dt_board_compat[] __initconst = {
Use generic irqchip_init() DT call to initialize IRQs, so after this patch, the mxc-avic driver is quite prepared to move to drivers/irqchip. As a temporary solution to do it, we use OF_DECLARE_2() instead of IRQCHIP_DECLARE(). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- arch/arm/mach-imx/avic.c | 29 ++++++++++++++++++++++------- arch/arm/mach-imx/imx25-dt.c | 1 - arch/arm/mach-imx/imx27-dt.c | 1 - arch/arm/mach-imx/imx31-dt.c | 1 - arch/arm/mach-imx/imx35-dt.c | 3 ++- 5 files changed, 24 insertions(+), 11 deletions(-)