diff mbox

[v3] i2c: exynos5: Properly use the "noirq" variants of suspend/resume

Message ID 1403714360-7581-1-git-send-email-dianders@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Doug Anderson June 25, 2014, 4:39 p.m. UTC 
The original code for the exynos i2c controller registered for the
"noirq" variants.  However during review feedback it was moved to
SIMPLE_DEV_PM_OPS without anyone noticing that it meant we were no
longer actually "noirq" (despite functions named
exynos5_i2c_suspend_noirq and exynos5_i2c_resume_noirq).

i2c controllers that might have wakeup sources on them seem to need to
resume at noirq time so that the individual drivers can actually read
the i2c bus to handle their wakeup.

NOTE: I took the original review feedback from Wolfram and added
poweroff, thaw, freeze, restore.

This patch has only been compile-tested since I don't have all the
patches needed to make my machine using this i2c driver actually
suspend/resume.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
---
Changes in v3:
- Made the structure static.

Changes in v2:
- Added missing CONFIG_PM_SLEEP

 drivers/i2c/busses/i2c-exynos5.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

Comments

Wolfram Sang July 16, 2014, 5:30 p.m. UTC | #1 
On Wed, Jun 25, 2014 at 09:39:20AM -0700, Doug Anderson wrote:
> The original code for the exynos i2c controller registered for the
> "noirq" variants.  However during review feedback it was moved to
> SIMPLE_DEV_PM_OPS without anyone noticing that it meant we were no
> longer actually "noirq" (despite functions named
> exynos5_i2c_suspend_noirq and exynos5_i2c_resume_noirq).
> 
> i2c controllers that might have wakeup sources on them seem to need to
> resume at noirq time so that the individual drivers can actually read
> the i2c bus to handle their wakeup.
> 
> NOTE: I took the original review feedback from Wolfram and added
> poweroff, thaw, freeze, restore.
> 
> This patch has only been compile-tested since I don't have all the
> patches needed to make my machine using this i2c driver actually
> suspend/resume.
> 
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>

Applied to for-next, thanks!
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 63d2292..f9447a4 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -789,8 +789,16 @@  static int exynos5_i2c_resume_noirq(struct device *dev)
 }
 #endif
 
-static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq,
-			 exynos5_i2c_resume_noirq);
+static const struct dev_pm_ops exynos5_i2c_dev_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend_noirq = exynos5_i2c_suspend_noirq,
+	.resume_noirq = exynos5_i2c_resume_noirq,
+	.freeze_noirq = exynos5_i2c_suspend_noirq,
+	.thaw_noirq = exynos5_i2c_resume_noirq,
+	.poweroff_noirq = exynos5_i2c_suspend_noirq,
+	.restore_noirq = exynos5_i2c_resume_noirq,
+#endif
+};
 
 static struct platform_driver exynos5_i2c_driver = {
 	.probe		= exynos5_i2c_probe,