[10/19] ARM: Samsung: DT: Add Device tree for S5PC110/S5PV210 Boards

Message ID	1404496099-26708-11-git-send-email-t.figa@samsung.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Tomasz Figa <t.figa@samsung.com> To: linux-samsung-soc@vger.kernel.org Subject: [PATCH 10/19] ARM: Samsung: DT: Add Device tree for S5PC110/S5PV210 Boards Date: Fri, 04 Jul 2014 19:48:10 +0200 Message-id: <1404496099-26708-11-git-send-email-t.figa@samsung.com> In-reply-to: <1404496099-26708-1-git-send-email-t.figa@samsung.com> References: <1404496099-26708-1-git-send-email-t.figa@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com>, =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>, Arnd Bergmann <arnd@arndb.de>, linux-kernel@vger.kernel.org, Tomasz Figa <tomasz.figa@gmail.com>, Mark Brown <broonie@kernel.org>, Olof Johansson <olof@lixom.net>, linux-arm-kernel@lists.infradead.org, Marek Szyprowski <m.szyprowski@samsung.com> Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff6..386c8d8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -321,6 +321,11 @@ dtb-$(CONFIG_ARCH_QCOM) += \ dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb +dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \ + s5pv210-goni.dtb \ + s5pv210-smdkc110.dtb \ + s5pv210-smdkv210.dtb \ + s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts new file mode 100644 index 0000000..aa31b84 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -0,0 +1,392 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Aquila board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Aquila based on S5PC110"; + compatible = "samsung,aquila", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x18000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + status = "okay"; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + pinctrl-names = "default"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>; + pinctrl-names = "default"; + status = "okay"; +}; + +&onenand { + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <0>; + hactive = <800>; + vactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vback-porch = <3>; + vfront-porch = <28>; + vsync-len = <1>; + }; + }; +}; + +&pinctrl0 { + t_flash_detect: t-flash-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts new file mode 100644 index 0000000..6387c77 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -0,0 +1,449 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Goni board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Goni based on S5PC110"; + compatible = "samsung,goni", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <0>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + + tsp_reg: fixed-regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <3>; + gpios = <&gpj1 3 0>; + enable-active-high; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + tsp@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 2>; + + atmel,x-line = <17>; + atmel,y-line = <11>; + atmel,x-size = <800>; + atmel,y-size = <480>; + atmel,burst-length = <0x21>; + atmel,threshold = <0x28>; + atmel,orientation = <1>; + + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + noon010pc30: sensor@30 { + compatible = "siliconfile,noon010pc30"; + reg = <0x30>; + vddio-supply = <&ldo11_reg>; + vdda-supply = <&ldo13_reg>; + vdd_core-supply = <&ldo14_reg>; + + clock-frequency = <16000000>; + clocks = <&clock_cam 0>; + clock-names = "mclk"; + nreset-gpios = <&gpb 2 0>; + nstby-gpios = <&gpb 0 0>; + + port { + noon010pc30_ep: endpoint { + remote-endpoint = <&fimc0_ep>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <1>; + pclk-sample = <1>; + }; + }; + }; +}; + +&camera { + pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>; + pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>; + pinctrl-names = "default", "idle"; + + parallel-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* camera A input */ + port@1 { + reg = <1>; + fimc0_ep: endpoint { + remote-endpoint = <&noon010pc30_ep>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + /* 480x800@55Hz */ + clock-frequency = <23439570>; + hactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vactive = <800>; + vback-porch = <2>; + vfront-porch = <28>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; +}; + +&onenand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts new file mode 100644 index 0000000..1eedab7 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts @@ -0,0 +1,78 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for YIC System SMDC110 board. + * + * NOTE: This file is completely based on original board file for mach-smdkc110 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKC110 based on S5PC110"; + compatible = "yic,smdkc110", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts new file mode 100644 index 0000000..cb85218 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -0,0 +1,238 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for YIC System SMDV210 board. + * + * NOTE: This file is completely based on original board file for mach-smdkv210 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKV210 based on S5PV210"; + compatible = "yic,smdkv210", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x40000000>; + }; + + ethernet@18000000 { + compatible = "davicom,dm9000"; + reg = <0xA8000000 0x2 0xA8000002 0x2>; + interrupt-parent = <&gph1>; + interrupts = <1 4>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <8>; + samsung,keypad-num-columns = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_row3>, <&keypad_row4>, <&keypad_row5>, + <&keypad_row6>, <&keypad_row7>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>, + <&keypad_col3>, <&keypad_col4>, <&keypad_col5>, + <&keypad_col6>, <&keypad_col7>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <KEY_1>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <KEY_2>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <KEY_3>; + }; + + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <KEY_4>; + }; + + key_5 { + keypad,row = <0 + >; + keypad,column = <7>; + linux,code = <KEY_5>; + }; + + key_6 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <KEY_A>; + }; + key_7 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <KEY_B>; + }; + + key_8 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <KEY_C>; + }; + + key_9 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <KEY_D>; + }; + + key_10 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <KEY_E>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 800x480@60Hz */ + clock-frequency = <24373920>; + hactive = <800>; + vactive = <480>; + hfront-porch = <8>; + hback-porch = <13>; + hsync-len = <3>; + vback-porch = <7>; + vfront-porch = <5>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; + +&pwm { + samsung,pwm-outputs = <3>; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts new file mode 100644 index 0000000..622599f --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-torbreck.dts @@ -0,0 +1,92 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Torbreck board. + * + * NOTE: This file is completely based on original board file for mach-torbreck + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "aESOP Torbreck based on S5PV210"; + compatible = "aesop,torbreck", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0 { + status = "okay"; +};

[10/19] ARM: Samsung: DT: Add Device tree for S5PC110/S5PV210 Boards

Commit Message

Patch