| Message ID | 1405028569-14253-11-git-send-email-ttynkkynen@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
It might look nicer if the voltage table was in a separate file. A bit of a border case, maybe. On 11/07/14 00:42, Tuomas Tynkkynen wrote: > ... > + nvidia,pmic-voltage-table = > + <0x1e 700000>, > + <0x1f 710000>, > + <0x20 720000>, > + <0x21 730000>, > + <0x22 740000>, > + <0x23 750000>, > + <0x24 760000>, > + <0x25 770000>, > + <0x26 780000>, > + <0x27 790000>, > + <0x28 800000>, > + <0x29 810000>, > + <0x2a 820000>, > + <0x2b 830000>, > + <0x2c 840000>, > + <0x2d 850000>, > + <0x2e 860000>, > + <0x2f 870000>, > + <0x30 880000>, > + <0x31 890000>, > + <0x32 900000>, > + <0x33 910000>, > + <0x34 920000>, > + <0x35 930000>, > + <0x36 940000>, > + <0x37 950000>, > + <0x38 960000>, > + <0x39 970000>, > + <0x3a 980000>, > + <0x3b 990000>, > + <0x3c 1000000>, > + <0x3d 1010000>, > + <0x3e 1020000>, > + <0x3f 1030000>, > + <0x40 1040000>, > + <0x41 1050000>, > + <0x42 1060000>, > + <0x43 1070000>, > + <0x44 1080000>, > + <0x45 1090000>, > + <0x46 1100000>, > + <0x47 1110000>, > + <0x48 1120000>, > + <0x49 1130000>, > + <0x4a 1140000>, > + <0x4b 1150000>, > + <0x4c 1160000>, > + <0x4d 1170000>, > + <0x4e 1180000>, > + <0x4f 1190000>, > + <0x50 1200000>, > + <0x51 1210000>, > + <0x52 1220000>, > + <0x53 1230000>, > + <0x54 1240000>, > + <0x55 1250000>, > + <0x56 1260000>, > + <0x57 1270000>, > + <0x58 1280000>, > + <0x59 1290000>, > + <0x5a 1300000>, > + <0x5b 1310000>, > + <0x5c 1320000>, > + <0x5d 1330000>, > + <0x5e 1340000>, > + <0x5f 1350000>, > + <0x60 1360000>, > + <0x61 1370000>, > + <0x62 1380000>, > + <0x63 1390000>, > + <0x64 1400000>; > ...
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 89a772d..2dfd516 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1453,7 +1453,7 @@ vin-ldo9-10-supply = <&vdd_5v0_sys>; vin-ldo11-supply = <&vdd_3v3_run>; - sd0 { + vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>; @@ -1636,6 +1636,87 @@ non-removable; }; + dfll@0,70110000 { + status = "okay"; + vdd_cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + nvidia,pmic-i2c-address = <0x40>; + nvidia,pmic-i2c-voltage-register = <0x00>; + + nvidia,pmic-voltage-table = + <0x1e 700000>, + <0x1f 710000>, + <0x20 720000>, + <0x21 730000>, + <0x22 740000>, + <0x23 750000>, + <0x24 760000>, + <0x25 770000>, + <0x26 780000>, + <0x27 790000>, + <0x28 800000>, + <0x29 810000>, + <0x2a 820000>, + <0x2b 830000>, + <0x2c 840000>, + <0x2d 850000>, + <0x2e 860000>, + <0x2f 870000>, + <0x30 880000>, + <0x31 890000>, + <0x32 900000>, + <0x33 910000>, + <0x34 920000>, + <0x35 930000>, + <0x36 940000>, + <0x37 950000>, + <0x38 960000>, + <0x39 970000>, + <0x3a 980000>, + <0x3b 990000>, + <0x3c 1000000>, + <0x3d 1010000>, + <0x3e 1020000>, + <0x3f 1030000>, + <0x40 1040000>, + <0x41 1050000>, + <0x42 1060000>, + <0x43 1070000>, + <0x44 1080000>, + <0x45 1090000>, + <0x46 1100000>, + <0x47 1110000>, + <0x48 1120000>, + <0x49 1130000>, + <0x4a 1140000>, + <0x4b 1150000>, + <0x4c 1160000>, + <0x4d 1170000>, + <0x4e 1180000>, + <0x4f 1190000>, + <0x50 1200000>, + <0x51 1210000>, + <0x52 1220000>, + <0x53 1230000>, + <0x54 1240000>, + <0x55 1250000>, + <0x56 1260000>, + <0x57 1270000>, + <0x58 1280000>, + <0x59 1290000>, + <0x5a 1300000>, + <0x5b 1310000>, + <0x5c 1320000>, + <0x5d 1330000>, + <0x5e 1340000>, + <0x5f 1350000>, + <0x60 1360000>, + <0x61 1370000>, + <0x62 1380000>, + <0x63 1390000>, + <0x64 1400000>; + }; + ahub@0,70300000 { i2s@0,70301100 { status = "okay";
Add the board-specific properties of the DFLL for the Jetson TK1 board. On this board, the DFLL will take control of the sd0 regulator on the on-board AS3722 PMIC. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 83 ++++++++++++++++++++++++++++++- 1 file changed, 82 insertions(+), 1 deletion(-)