| Message ID | 1405957142-19416-13-git-send-email-ttynkkynen@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 624b0fb..0c30450 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1453,7 +1453,7 @@ vin-ldo9-10-supply = <&vdd_5v0_sys>; vin-ldo11-supply = <&vdd_3v3_run>; - sd0 { + vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>; @@ -1662,6 +1662,12 @@ non-removable; }; + dfll@0,70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + ahub@0,70300000 { i2s@0,70301100 { status = "okay";
Add the board-specific properties of the DFLL for the Jetson TK1 board. On this board, the DFLL will take control of the sd0 regulator on the on-board AS3722 PMIC. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> --- v2 changes: - same changes that were done to the binding in patch 3 * dropped most of the I2C properties, as they are now queried from the regulator framework * s/vdd_cpu-supply/vdd-cpu-supply/ to better match what other Tegra bindings do arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)