new file mode 100644
@@ -0,0 +1,302 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_IMX1_PINFUNC_H
+#define __DTS_IMX1_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function: 0 - Primary function
+ * 1 - Alternate function
+ * 2 - GPIO
+ * direction: 0 - Input
+ * 1 - Output
+ * gpio_oconf: 0 - A_IN
+ * 1 - B_IN
+ * 2 - A_OUT
+ * 3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ * 1 - Interrupt Status Register
+ * 2 - 0
+ * 3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX1_PAD_A24__A24 0x00 0x004
+#define MX1_PAD_A24__GPIO1_0 0x00 0x032
+#define MX1_PAD_A24__SPI2_CLK 0x00 0x006
+#define MX1_PAD_TIN__TIN 0x01 0x000
+#define MX1_PAD_TIN__GPIO1_1 0x01 0x032
+#define MX1_PAD_TIN__SPI2_RXD 0x01 0x022
+#define MX1_PAD_PWMO__PWMO 0x02 0x004
+#define MX1_PAD_PWMO__GPIO1_2 0x02 0x032
+#define MX1_PAD_CSI_MCLK__CSI_MCLK 0x03 0x004
+#define MX1_PAD_CSI_MCLK__GPIO1_3 0x03 0x032
+#define MX1_PAD_CSI_D0__CSI_D0 0x04 0x000
+#define MX1_PAD_CSI_D0__GPIO1_4 0x04 0x032
+#define MX1_PAD_CSI_D1__CSI_D1 0x05 0x000
+#define MX1_PAD_CSI_D1__GPIO1_5 0x05 0x032
+#define MX1_PAD_CSI_D2__CSI_D2 0x06 0x000
+#define MX1_PAD_CSI_D2__GPIO1_6 0x06 0x032
+#define MX1_PAD_CSI_D3__CSI_D3 0x07 0x000
+#define MX1_PAD_CSI_D3__GPIO1_7 0x07 0x032
+#define MX1_PAD_CSI_D4__CSI_D4 0x08 0x000
+#define MX1_PAD_CSI_D4__GPIO1_8 0x08 0x032
+#define MX1_PAD_CSI_D5__CSI_D5 0x09 0x000
+#define MX1_PAD_CSI_D5__GPIO1_9 0x09 0x032
+#define MX1_PAD_CSI_D6__CSI_D6 0x0a 0x000
+#define MX1_PAD_CSI_D6__GPIO1_10 0x0a 0x032
+#define MX1_PAD_CSI_D7__CSI_D7 0x0b 0x000
+#define MX1_PAD_CSI_D7__GPIO1_11 0x0b 0x032
+#define MX1_PAD_CSI_VSYNC__CSI_VSYNC 0x0c 0x000
+#define MX1_PAD_CSI_VSYNC__GPIO1_12 0x0c 0x032
+#define MX1_PAD_CSI_HSYNC__CSI_HSYNC 0x0d 0x000
+#define MX1_PAD_CSI_HSYNC__GPIO1_13 0x0d 0x032
+#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK 0x0e 0x000
+#define MX1_PAD_CSI_PIXCLK__GPIO1_14 0x0e 0x032
+#define MX1_PAD_I2C_SDA__I2C_SDA 0x0f 0x000
+#define MX1_PAD_I2C_SDA__GPIO1_15 0x0f 0x032
+#define MX1_PAD_I2C_SCL__I2C_SCL 0x10 0x004
+#define MX1_PAD_I2C_SCL__GPIO1_16 0x10 0x032
+#define MX1_PAD_DTACK__DTACK 0x11 0x000
+#define MX1_PAD_DTACK__GPIO1_17 0x11 0x032
+#define MX1_PAD_DTACK__SPI2_SS 0x11 0x002
+#define MX1_PAD_DTACK__A25 0x11 0x016
+#define MX1_PAD_BCLK__BCLK 0x12 0x004
+#define MX1_PAD_BCLK__GPIO1_18 0x12 0x032
+#define MX1_PAD_LBA__LBA 0x13 0x004
+#define MX1_PAD_LBA__GPIO1_19 0x13 0x032
+#define MX1_PAD_ECB__ECB 0x14 0x000
+#define MX1_PAD_ECB__GPIO1_20 0x14 0x032
+#define MX1_PAD_A0__A0 0x15 0x004
+#define MX1_PAD_A0__GPIO1_21 0x15 0x032
+#define MX1_PAD_CS4__CS4 0x16 0x004
+#define MX1_PAD_CS4__GPIO1_22 0x16 0x032
+#define MX1_PAD_CS5__CS5 0x17 0x004
+#define MX1_PAD_CS5__GPIO1_23 0x17 0x032
+#define MX1_PAD_A16__A16 0x18 0x004
+#define MX1_PAD_A16__GPIO1_24 0x18 0x032
+#define MX1_PAD_A17__A17 0x19 0x004
+#define MX1_PAD_A17__GPIO1_25 0x19 0x032
+#define MX1_PAD_A18__A18 0x1a 0x004
+#define MX1_PAD_A18__GPIO1_26 0x1a 0x032
+#define MX1_PAD_A19__A19 0x1b 0x004
+#define MX1_PAD_A19__GPIO1_27 0x1b 0x032
+#define MX1_PAD_A20__A20 0x1c 0x004
+#define MX1_PAD_A20__GPIO1_28 0x1c 0x032
+#define MX1_PAD_A21__A21 0x1d 0x004
+#define MX1_PAD_A21__GPIO1_29 0x1d 0x032
+#define MX1_PAD_A22__A22 0x1e 0x004
+#define MX1_PAD_A22__GPIO1_30 0x1e 0x032
+#define MX1_PAD_A23__A23 0x1f 0x004
+#define MX1_PAD_A23__GPIO1_31 0x1f 0x032
+#define MX1_PAD_SD_DAT0__SD_DAT0 0x28 0x000
+#define MX1_PAD_SD_DAT0__MS_PI0 0x28 0x001
+#define MX1_PAD_SD_DAT0__GPIO2_8 0x28 0x032
+#define MX1_PAD_SD_DAT1__SD_DAT1 0x29 0x000
+#define MX1_PAD_SD_DAT1__MS_PI1 0x29 0x001
+#define MX1_PAD_SD_DAT1__GPIO2_9 0x29 0x032
+#define MX1_PAD_SD_DAT2__SD_DAT2 0x2a 0x000
+#define MX1_PAD_SD_DAT2__MS_SCLKI 0x2a 0x001
+#define MX1_PAD_SD_DAT2__GPIO2_10 0x2a 0x032
+#define MX1_PAD_SD_DAT3__SD_DAT3 0x2b 0x000
+#define MX1_PAD_SD_DAT3__MS_SDIO 0x2b 0x001
+#define MX1_PAD_SD_DAT3__GPIO2_11 0x2b 0x032
+#define MX1_PAD_SD_SCLK__SD_SCLK 0x2c 0x004
+#define MX1_PAD_SD_SCLK__MS_SCLKO 0x2c 0x005
+#define MX1_PAD_SD_SCLK__GPIO2_12 0x2c 0x032
+#define MX1_PAD_SD_CMD__SD_CMD 0x2d 0x000
+#define MX1_PAD_SD_CMD__MS_BS 0x2d 0x005
+#define MX1_PAD_SD_CMD__GPIO2_13 0x2d 0x032
+#define MX1_PAD_SIM_SVEN__SIM_SVEN 0x2e 0x004
+#define MX1_PAD_SIM_SVEN__SSI_RXFS 0x2e 0x001
+#define MX1_PAD_SIM_SVEN__GPIO2_14 0x2e 0x032
+#define MX1_PAD_SIM_PD__SIM_PD 0x2f 0x000
+#define MX1_PAD_SIM_PD__SSI_RXCLK 0x2f 0x001
+#define MX1_PAD_SIM_PD__GPIO2_15 0x2f 0x032
+#define MX1_PAD_SIM_TX__SIM_TX 0x30 0x000
+#define MX1_PAD_SIM_TX__SSI_RXDAT 0x30 0x001
+#define MX1_PAD_SIM_TX__GPIO2_16 0x30 0x032
+#define MX1_PAD_SIM_RX__SIM_RX 0x31 0x000
+#define MX1_PAD_SIM_RX__SSI_TXDAT 0x31 0x005
+#define MX1_PAD_SIM_RX__GPIO2_17 0x31 0x032
+#define MX1_PAD_SIM_RST__SIM_RST 0x32 0x004
+#define MX1_PAD_SIM_RST__SSI_TXFS 0x32 0x001
+#define MX1_PAD_SIM_RST__GPIO2_18 0x32 0x032
+#define MX1_PAD_SIM_CLK__SIM_CLK 0x33 0x004
+#define MX1_PAD_SIM_CLK__SSI_TXCLK 0x33 0x001
+#define MX1_PAD_SIM_CLK__GPIO2_19 0x33 0x032
+#define MX1_PAD_USBD_AFE__USBD_AFE 0x34 0x004
+#define MX1_PAD_USBD_AFE__GPIO2_20 0x34 0x032
+#define MX1_PAD_USBD_OE__USBD_OE 0x35 0x004
+#define MX1_PAD_USBD_OE__GPIO2_21 0x35 0x032
+#define MX1_PAD_USBD_RCV__USBD_RCV 0x36 0x000
+#define MX1_PAD_USBD_RCV__GPIO2_22 0x36 0x032
+#define MX1_PAD_USBD_SUSPND__USBD_SUSPND 0x37 0x004
+#define MX1_PAD_USBD_SUSPND__GPIO2_23 0x37 0x032
+#define MX1_PAD_USBD_VP__USBD_VP 0x38 0x000
+#define MX1_PAD_USBD_VP__GPIO2_24 0x38 0x032
+#define MX1_PAD_USBD_VM__USBD_VM 0x39 0x000
+#define MX1_PAD_USBD_VM__GPIO2_25 0x39 0x032
+#define MX1_PAD_USBD_VPO__USBD_VPO 0x3a 0x004
+#define MX1_PAD_USBD_VPO__GPIO2_26 0x3a 0x032
+#define MX1_PAD_USBD_VMO__USBD_VMO 0x3b 0x004
+#define MX1_PAD_USBD_VMO__GPIO2_27 0x3b 0x032
+#define MX1_PAD_UART2_CTS__UART2_CTS 0x3c 0x004
+#define MX1_PAD_UART2_CTS__GPIO2_28 0x3c 0x032
+#define MX1_PAD_UART2_RTS__UART2_RTS 0x3d 0x000
+#define MX1_PAD_UART2_RTS__GPIO2_29 0x3d 0x032
+#define MX1_PAD_UART2_TXD__UART2_TXD 0x3e 0x004
+#define MX1_PAD_UART2_TXD__GPIO2_30 0x3e 0x032
+#define MX1_PAD_UART2_RXD__UART2_RXD 0x3f 0x000
+#define MX1_PAD_UART2_RXD__GPIO2_31 0x3f 0x032
+#define MX1_PAD_SSI_RXFS__SSI_RXFS 0x43 0x000
+#define MX1_PAD_SSI_RXFS__GPIO3_3 0x43 0x032
+#define MX1_PAD_SSI_RXCLK__SSI_RXCLK 0x44 0x000
+#define MX1_PAD_SSI_RXCLK__GPIO3_4 0x44 0x032
+#define MX1_PAD_SSI_RXDAT__SSI_RXDAT 0x45 0x000
+#define MX1_PAD_SSI_RXDAT__GPIO3_5 0x45 0x032
+#define MX1_PAD_SSI_TXDAT__SSI_TXDAT 0x46 0x004
+#define MX1_PAD_SSI_TXDAT__GPIO3_6 0x46 0x032
+#define MX1_PAD_SSI_TXFS__SSI_TXFS 0x47 0x000
+#define MX1_PAD_SSI_TXFS__GPIO3_7 0x47 0x032
+#define MX1_PAD_SSI_TXCLK__SSI_TXCLK 0x48 0x000
+#define MX1_PAD_SSI_TXCLK__GPIO3_8 0x48 0x032
+#define MX1_PAD_UART1_CTS__UART1_CTS 0x49 0x004
+#define MX1_PAD_UART1_CTS__GPIO3_9 0x49 0x032
+#define MX1_PAD_UART1_RTS__UART1_RTS 0x4a 0x000
+#define MX1_PAD_UART1_RTS__GPIO3_10 0x4a 0x032
+#define MX1_PAD_UART1_TXD__UART1_TXD 0x4b 0x004
+#define MX1_PAD_UART1_TXD__GPIO3_11 0x4b 0x032
+#define MX1_PAD_UART1_RXD__UART1_RXD 0x4c 0x000
+#define MX1_PAD_UART1_RXD__GPIO3_12 0x4c 0x032
+#define MX1_PAD_SPI1_RDY__SPI1_RDY 0x4d 0x000
+#define MX1_PAD_SPI1_RDY__GPIO3_13 0x4d 0x032
+#define MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x4e 0x004
+#define MX1_PAD_SPI1_SCLK__GPIO3_14 0x4e 0x032
+#define MX1_PAD_SPI1_SS__SPI1_SS 0x4f 0x000
+#define MX1_PAD_SPI1_SS__GPIO3_15 0x4f 0x032
+#define MX1_PAD_SPI1_MISO__SPI1_MISO 0x50 0x000
+#define MX1_PAD_SPI1_MISO__GPIO3_16 0x50 0x032
+#define MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x51 0x004
+#define MX1_PAD_SPI1_MOSI__GPIO3_17 0x51 0x032
+#define MX1_PAD_BT13__BT13 0x53 0x004
+#define MX1_PAD_BT13__SSI2_RXCLK 0x53 0x001
+#define MX1_PAD_BT13__GPIO3_19 0x53 0x032
+#define MX1_PAD_BT12__BT12 0x54 0x004
+#define MX1_PAD_BT12__SSI2_TXFS 0x54 0x001
+#define MX1_PAD_BT12__GPIO3_20 0x54 0x032
+#define MX1_PAD_BT11__BT11 0x55 0x004
+#define MX1_PAD_BT11__SSI2_TXCLK 0x55 0x001
+#define MX1_PAD_BT11__GPIO3_21 0x55 0x032
+#define MX1_PAD_BT10__BT10 0x56 0x004
+#define MX1_PAD_BT10__SSI2_TX 0x56 0x001
+#define MX1_PAD_BT10__GPIO3_22 0x56 0x032
+#define MX1_PAD_BT9__BT9 0x57 0x004
+#define MX1_PAD_BT9__SSI2_RX 0x57 0x001
+#define MX1_PAD_BT9__GPIO3_23 0x57 0x032
+#define MX1_PAD_BT8__BT8 0x58 0x004
+#define MX1_PAD_BT8__SSI2_RXFS 0x58 0x001
+#define MX1_PAD_BT8__GPIO3_24 0x58 0x032
+#define MX1_PAD_BT8__UART3_RI 0x58 0x016
+#define MX1_PAD_BT7__BT7 0x59 0x004
+#define MX1_PAD_BT7__GPIO3_25 0x59 0x032
+#define MX1_PAD_BT7__UART3_DSR 0x59 0x016
+#define MX1_PAD_BT6__BT6 0x5a 0x004
+#define MX1_PAD_BT6__GPIO3_26 0x5a 0x032
+#define MX1_PAD_BT6__SPI2_SS3 0x5a 0x016
+#define MX1_PAD_BT6__UART3_DTR 0x5a 0x022
+#define MX1_PAD_BT5__BT5 0x5b 0x000
+#define MX1_PAD_BT5__GPIO3_27 0x5b 0x032
+#define MX1_PAD_BT5__UART3_DCD 0x5b 0x016
+#define MX1_PAD_BT4__BT4 0x5c 0x000
+#define MX1_PAD_BT4__GPIO3_28 0x5c 0x032
+#define MX1_PAD_BT4__UART3_CTS 0x5c 0x016
+#define MX1_PAD_BT3__BT3 0x5d 0x000
+#define MX1_PAD_BT3__GPIO3_29 0x5d 0x032
+#define MX1_PAD_BT3__UART3_RTS 0x5d 0x022
+#define MX1_PAD_BT2__BT2 0x5e 0x004
+#define MX1_PAD_BT2__GPIO3_30 0x5e 0x032
+#define MX1_PAD_BT2__UART3_TX 0x5e 0x016
+#define MX1_PAD_BT1__BT1 0x5f 0x000
+#define MX1_PAD_BT1__GPIO3_31 0x5f 0x032
+#define MX1_PAD_BT1__UART3_RX 0x5f 0x022
+#define MX1_PAD_LSCLK__LSCLK 0x66 0x004
+#define MX1_PAD_LSCLK__GPIO4_6 0x66 0x032
+#define MX1_PAD_REV__REV 0x67 0x004
+#define MX1_PAD_REV__UART2_DTR 0x67 0x001
+#define MX1_PAD_REV__GPIO4_7 0x67 0x032
+#define MX1_PAD_REV__SPI2_CLK 0x67 0x006
+#define MX1_PAD_CLS__CLS 0x68 0x004
+#define MX1_PAD_CLS__UART2_DCD 0x68 0x005
+#define MX1_PAD_CLS__GPIO4_8 0x68 0x032
+#define MX1_PAD_CLS__SPI2_SS 0x68 0x002
+#define MX1_PAD_PS__PS 0x69 0x004
+#define MX1_PAD_PS__UART2_RI 0x69 0x005
+#define MX1_PAD_PS__GPIO4_9 0x69 0x032
+#define MX1_PAD_PS__SPI2_RXD 0x69 0x022
+#define MX1_PAD_SPL_SPR__SPL_SPR 0x6a 0x004
+#define MX1_PAD_SPL_SPR__UART2_DSR 0x6a 0x005
+#define MX1_PAD_SPL_SPR__GPIO4_10 0x6a 0x032
+#define MX1_PAD_SPL_SPR__SPI2_TXD 0x6a 0x006
+#define MX1_PAD_CONTRAST__CONTRAST 0x6b 0x004
+#define MX1_PAD_CONTRAST__GPIO4_11 0x6b 0x032
+#define MX1_PAD_CONTRAST__SPI2_SS2 0x6b 0x012
+#define MX1_PAD_ACD_OE__ACD_OE 0x6c 0x004
+#define MX1_PAD_ACD_OE__GPIO4_12 0x6c 0x032
+#define MX1_PAD_LP_HSYNC__LP_HSYNC 0x6d 0x004
+#define MX1_PAD_LP_HSYNC__GPIO4_13 0x6d 0x032
+#define MX1_PAD_FLM_VSYNC__FLM_VSYNC 0x6e 0x004
+#define MX1_PAD_FLM_VSYNC__GPIO4_14 0x6e 0x032
+#define MX1_PAD_LD0__LD0 0x6f 0x004
+#define MX1_PAD_LD0__GPIO4_15 0x6f 0x032
+#define MX1_PAD_LD1__LD1 0x70 0x004
+#define MX1_PAD_LD1__GPIO4_16 0x70 0x032
+#define MX1_PAD_LD2__LD2 0x71 0x004
+#define MX1_PAD_LD2__GPIO4_17 0x71 0x032
+#define MX1_PAD_LD3__LD3 0x72 0x004
+#define MX1_PAD_LD3__GPIO4_18 0x72 0x032
+#define MX1_PAD_LD4__LD4 0x73 0x004
+#define MX1_PAD_LD4__GPIO4_19 0x73 0x032
+#define MX1_PAD_LD5__LD5 0x74 0x004
+#define MX1_PAD_LD5__GPIO4_20 0x74 0x032
+#define MX1_PAD_LD6__LD6 0x75 0x004
+#define MX1_PAD_LD6__GPIO4_21 0x75 0x032
+#define MX1_PAD_LD7__LD7 0x76 0x004
+#define MX1_PAD_LD7__GPIO4_22 0x76 0x032
+#define MX1_PAD_LD8__LD8 0x77 0x004
+#define MX1_PAD_LD8__GPIO4_23 0x77 0x032
+#define MX1_PAD_LD9__LD9 0x78 0x004
+#define MX1_PAD_LD9__GPIO4_24 0x78 0x032
+#define MX1_PAD_LD10__LD10 0x79 0x004
+#define MX1_PAD_LD10__GPIO4_25 0x79 0x032
+#define MX1_PAD_LD11__LD11 0x7a 0x004
+#define MX1_PAD_LD11__GPIO4_26 0x7a 0x032
+#define MX1_PAD_LD12__LD12 0x7b 0x004
+#define MX1_PAD_LD12__GPIO4_27 0x7b 0x032
+#define MX1_PAD_LD13__LD13 0x7c 0x004
+#define MX1_PAD_LD13__GPIO4_28 0x7c 0x032
+#define MX1_PAD_LD14__LD14 0x7d 0x004
+#define MX1_PAD_LD14__GPIO4_29 0x7d 0x032
+#define MX1_PAD_LD15__LD15 0x7e 0x004
+#define MX1_PAD_LD15__GPIO4_30 0x7e 0x032
+#define MX1_PAD_TMR2OUT__TMR2OUT 0x7f 0x000
+#define MX1_PAD_TMR2OUT__GPIO4_31 0x7f 0x032
+#define MX1_PAD_TMR2OUT__SPI2_TXD 0x7f 0x006
+
+#endif
new file mode 100644
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx1-pinfunc.h"
+
+#include <dt-bindings/clock/imx1-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &i2c;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ spi0 = &cspi1;
+ spi1 = &cspi2;
+ };
+
+ aitc: aitc-interrupt-controller@00223000 {
+ compatible = "fsl,imx1-aitc", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x00223000 0x1000>;
+ };
+
+ cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ cpu: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm920t";
+ operating-points = <200000 1900000>;
+ clock-latency = <62500>;
+ clocks = <&clks IMX1_CLK_MCU>;
+ voltage-tolerance = <5>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&aitc>;
+ ranges;
+
+ aipi@00200000 {
+ compatible = "fsl,aipi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x00200000 0x10000>;
+ ranges;
+
+ gpt1: timer@00202000 {
+ compatible = "fsl,imx1-gpt";
+ reg = <0x00202000 0x1000>;
+ interrupts = <59>;
+ clocks = <&clks IMX1_CLK_HCLK>,
+ <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt2: timer@00203000 {
+ compatible = "fsl,imx1-gpt";
+ reg = <0x00203000 0x1000>;
+ interrupts = <58>;
+ clocks = <&clks IMX1_CLK_HCLK>,
+ <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
+
+ fb: fb@00205000 {
+ compatible = "fsl,imx1-fb";
+ reg = <0x00205000 0x1000>;
+ interrupts = <14>;
+ clocks = <&clks IMX1_CLK_DUMMY>,
+ <&clks IMX1_CLK_DUMMY>,
+ <&clks IMX1_CLK_PER2>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@00206000 {
+ compatible = "fsl,imx1-uart";
+ reg = <0x00206000 0x1000>;
+ interrupts = <30 29 26>;
+ clocks = <&clks IMX1_CLK_HCLK>,
+ <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@00207000 {
+ compatible = "fsl,imx1-uart";
+ reg = <0x00207000 0x1000>;
+ interrupts = <24 23 20>;
+ clocks = <&clks IMX1_CLK_HCLK>,
+ <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ pwm: pwm@00208000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx1-pwm";
+ reg = <0x00208000 0x1000>;
+ interrupts = <34>;
+ clocks = <&clks IMX1_CLK_DUMMY>,
+ <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
+
+ dma: dma@00209000 {
+ compatible = "fsl,imx1-dma";
+ reg = <0x00209000 0x1000>;
+ interrupts = <61 60>;
+ clocks = <&clks IMX1_CLK_HCLK>,
+ <&clks IMX1_CLK_DMA_GATE>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <1>;
+ };
+
+ uart3: serial@0020a000 {
+ compatible = "fsl,imx1-uart";
+ reg = <0x0020a000 0x1000>;
+ interrupts = <54 4 1>;
+ clocks = <&clks IMX1_CLK_UART3_GATE>,
+ <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ aipi@00210000 {
+ compatible = "fsl,aipi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x00210000 0x10000>;
+ ranges;
+
+ cspi1: cspi@00213000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx1-cspi";
+ reg = <0x00213000 0x1000>;
+ interrupts = <41>;
+ clocks = <&clks IMX1_CLK_DUMMY>,
+ <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c: i2c@00217000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx1-i2c";
+ reg = <0x00217000 0x1000>;
+ interrupts = <39>;
+ clocks = <&clks IMX1_CLK_HCLK>;
+ status = "disabled";
+ };
+
+ cspi2: cspi@00219000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx1-cspi";
+ reg = <0x00219000 0x1000>;
+ interrupts = <40>;
+ clocks = <&clks IMX1_CLK_DUMMY>,
+ <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ clks: ccm@0021b000 {
+ compatible = "fsl,imx1-ccm";
+ reg = <0x0021b000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ iomuxc: iomuxc@0021c000 {
+ compatible = "fsl,imx1-iomuxc";
+ reg = <0x0021c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio1: gpio@0021c000 {
+ compatible = "fsl,imx1-gpio";
+ reg = <0x0021c000 0x100>;
+ interrupts = <11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@0021c100 {
+ compatible = "fsl,imx1-gpio";
+ reg = <0x0021c100 0x100>;
+ interrupts = <12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@0021c200 {
+ compatible = "fsl,imx1-gpio";
+ reg = <0x0021c200 0x100>;
+ interrupts = <13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@0021c300 {
+ compatible = "fsl,imx1-gpio";
+ reg = <0x0021c300 0x100>;
+ interrupts = <62>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+ };
+
+ weim: weim@00220000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx1-weim";
+ reg = <0x00220000 0x1000>;
+ clocks = <&clks IMX1_CLK_DUMMY>;
+ ranges = <
+ 0 0 0x10000000 0x02000000
+ 1 0 0x12000000 0x01000000
+ 2 0 0x13000000 0x01000000
+ 3 0 0x14000000 0x01000000
+ 4 0 0x15000000 0x01000000
+ 5 0 0x16000000 0x01000000
+ >;
+ status = "disabled";
+ };
+
+ esram: esram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x20000>;
+ };
+ };
+};
This patch adds basic devicetree template for i.MX1 based SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- arch/arm/boot/dts/imx1-pinfunc.h | 302 +++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx1.dtsi | 266 ++++++++++++++++++++++++++++++++++ 2 files changed, 568 insertions(+) create mode 100644 arch/arm/boot/dts/imx1-pinfunc.h create mode 100644 arch/arm/boot/dts/imx1.dtsi