| Message ID | 1406555876-11989-7-git-send-email-haojian.zhuang@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jul 28, 2014 at 02:57:50PM +0100, Haojian Zhuang wrote: > The DT binding for Hisilicon HiP04 clock driver. > > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > --- > .../devicetree/bindings/clock/hip04-clock.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt > > diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt > new file mode 100644 > index 0000000..4d31ae3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt > @@ -0,0 +1,20 @@ > +* Hisilicon HiP04 Clock Controller > + > +The HiP04 clock controller generates and supplies clock to various > +controllers within the HiP04 SoC. > + > +Required Properties: > + > +- compatible: should be one of the following. > + - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC. There's only one clock controller on-board and it's custom for HiP04? > + > +- reg: physical base address of the controller and length of memory mapped > + region. > + > +- #clock-cells: should be 1. > + > + > +Each clock is assigned an identifier and client nodes use this identifier > +to specify the clock which they consume. > + > +All these identifier could be found in <dt-bindings/clock/hip04-clock.h>. This must come in the same patch. Mark.
On 29 July 2014 01:54, Mark Rutland <mark.rutland@arm.com> wrote: > On Mon, Jul 28, 2014 at 02:57:50PM +0100, Haojian Zhuang wrote: >> The DT binding for Hisilicon HiP04 clock driver. >> >> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> >> --- >> .../devicetree/bindings/clock/hip04-clock.txt | 20 ++++++++++++++++++++ >> 1 file changed, 20 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt >> >> diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt >> new file mode 100644 >> index 0000000..4d31ae3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt >> @@ -0,0 +1,20 @@ >> +* Hisilicon HiP04 Clock Controller >> + >> +The HiP04 clock controller generates and supplies clock to various >> +controllers within the HiP04 SoC. >> + >> +Required Properties: >> + >> +- compatible: should be one of the following. >> + - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC. > > There's only one clock controller on-board and it's custom for HiP04? > Since all those PLL settings are configured in bootloader, kernel don't need to configure it again. By the way, I don't have the manual to configure those PLLs. All the clocks are defined as fixed in kernel side. >> + >> +- reg: physical base address of the controller and length of memory mapped >> + region. >> + >> +- #clock-cells: should be 1. >> + >> + >> +Each clock is assigned an identifier and client nodes use this identifier >> +to specify the clock which they consume. >> + >> +All these identifier could be found in <dt-bindings/clock/hip04-clock.h>. > > This must come in the same patch. > > Mark. HiP04 clock driver is already merged into mainline. Regards Haojian
On Tuesday 29 July 2014 10:25:49 Haojian Zhuang wrote: > On 29 July 2014 01:54, Mark Rutland <mark.rutland@arm.com> wrote: > > On Mon, Jul 28, 2014 at 02:57:50PM +0100, Haojian Zhuang wrote: > >> The DT binding for Hisilicon HiP04 clock driver. > >> > >> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > >> --- > >> .../devicetree/bindings/clock/hip04-clock.txt | 20 ++++++++++++++++++++ > >> 1 file changed, 20 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt > >> > >> diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt > >> new file mode 100644 > >> index 0000000..4d31ae3 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt > >> @@ -0,0 +1,20 @@ > >> +* Hisilicon HiP04 Clock Controller > >> + > >> +The HiP04 clock controller generates and supplies clock to various > >> +controllers within the HiP04 SoC. > >> + > >> +Required Properties: > >> + > >> +- compatible: should be one of the following. > >> + - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC. > > > > There's only one clock controller on-board and it's custom for HiP04? > > > > Since all those PLL settings are configured in bootloader, kernel > don't need to configure it again. > > By the way, I don't have the manual to configure those PLLs. All the clocks > are defined as fixed in kernel side. > If all the clocks are fixed-rate, you don't actually need a driver for them, just use the regular fixed-rate clock and define one node per clock. Arnd
On 29 July 2014 17:55, Arnd Bergmann <arnd@arndb.de> wrote: > On Tuesday 29 July 2014 10:25:49 Haojian Zhuang wrote: >> On 29 July 2014 01:54, Mark Rutland <mark.rutland@arm.com> wrote: >> > On Mon, Jul 28, 2014 at 02:57:50PM +0100, Haojian Zhuang wrote: >> >> The DT binding for Hisilicon HiP04 clock driver. >> >> >> >> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> >> >> --- >> >> .../devicetree/bindings/clock/hip04-clock.txt | 20 ++++++++++++++++++++ >> >> 1 file changed, 20 insertions(+) >> >> create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt >> >> >> >> diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt >> >> new file mode 100644 >> >> index 0000000..4d31ae3 >> >> --- /dev/null >> >> +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt >> >> @@ -0,0 +1,20 @@ >> >> +* Hisilicon HiP04 Clock Controller >> >> + >> >> +The HiP04 clock controller generates and supplies clock to various >> >> +controllers within the HiP04 SoC. >> >> + >> >> +Required Properties: >> >> + >> >> +- compatible: should be one of the following. >> >> + - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC. >> > >> > There's only one clock controller on-board and it's custom for HiP04? >> > >> >> Since all those PLL settings are configured in bootloader, kernel >> don't need to configure it again. >> >> By the way, I don't have the manual to configure those PLLs. All the clocks >> are defined as fixed in kernel side. >> > > If all the clocks are fixed-rate, you don't actually need a driver > for them, just use the regular fixed-rate clock and define one > node per clock. > > Arnd OK. I'll update it. Regards Haojian
On Tue, Jul 29, 2014 at 03:25:49AM +0100, Haojian Zhuang wrote: > On 29 July 2014 01:54, Mark Rutland <mark.rutland@arm.com> wrote: > > On Mon, Jul 28, 2014 at 02:57:50PM +0100, Haojian Zhuang wrote: > >> The DT binding for Hisilicon HiP04 clock driver. > >> > >> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > >> --- > >> .../devicetree/bindings/clock/hip04-clock.txt | 20 ++++++++++++++++++++ > >> 1 file changed, 20 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt > >> > >> diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt > >> new file mode 100644 > >> index 0000000..4d31ae3 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt > >> @@ -0,0 +1,20 @@ > >> +* Hisilicon HiP04 Clock Controller > >> + > >> +The HiP04 clock controller generates and supplies clock to various > >> +controllers within the HiP04 SoC. > >> + > >> +Required Properties: > >> + > >> +- compatible: should be one of the following. > >> + - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC. > > > > There's only one clock controller on-board and it's custom for HiP04? > > > > Since all those PLL settings are configured in bootloader, kernel > don't need to configure it again. > > By the way, I don't have the manual to configure those PLLs. All the clocks > are defined as fixed in kernel side. Given that, per Arnd's suggestion these should probably just be fixed-clock nodes, and we don't need the driver at all until we know how to handle these PLLs and their parents. > >> + > >> +- reg: physical base address of the controller and length of memory mapped > >> + region. > >> + > >> +- #clock-cells: should be 1. > >> + > >> + > >> +Each clock is assigned an identifier and client nodes use this identifier > >> +to specify the clock which they consume. > >> + > >> +All these identifier could be found in <dt-bindings/clock/hip04-clock.h>. > > > > This must come in the same patch. > > > > Mark. > > HiP04 clock driver is already merged into mainline. I see. This was not obvious from the commit message. Mark.
diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt new file mode 100644 index 0000000..4d31ae3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt @@ -0,0 +1,20 @@ +* Hisilicon HiP04 Clock Controller + +The HiP04 clock controller generates and supplies clock to various +controllers within the HiP04 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hip04-clock.h>.
The DT binding for Hisilicon HiP04 clock driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- .../devicetree/bindings/clock/hip04-clock.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt