From patchwork Wed Aug 6 17:03:05 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Peter Griffin X-Patchwork-Id: 4687301 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 326569F37E for ; Wed, 6 Aug 2014 17:05:59 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 05BC6200DB for ; Wed, 6 Aug 2014 17:05:58 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id ACFAD200D7 for ; Wed, 6 Aug 2014 17:05:56 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1XF4d5-0003n0-HG; Wed, 06 Aug 2014 17:03:59 +0000 Received: from mail-we0-f170.google.com ([74.125.82.170]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1XF4cs-0003dq-Tl for linux-arm-kernel@lists.infradead.org; Wed, 06 Aug 2014 17:03:48 +0000 Received: by mail-we0-f170.google.com with SMTP id w62so2914298wes.29 for ; Wed, 06 Aug 2014 10:03:23 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-type:content-transfer-encoding; bh=d6gimeQADOZ4dYjAF80L787RtjhWAKj3GhCSfts3Za0=; b=k8arvuYS67Yud82TEMzI6jyO9T77+4Pd050q7dV2WGlR9KC4dg/jEoBAmhUcGykJMu xY6qwjwveOwnolYwvClYpr7yBwgF8f7pEccLSpr3XJcIXD+rOM7/PeB4gTnPzAta9wg+ U0rnwVB4bYMSU/N3glTTe8cYR8ErlqjtXtYWjBuoDsaMwy/qb9m2EKJigATOJXFWbImH zZFKgcmK0rG8/i4Tnlji48NWQ8ph2JT5XHP6XDm3RRW/ph22mPFWM/3cQKVCNukxlhVy LXckZ/P1GAH0cvtgWN7Cr4uRhAHGUSuNjx2VDKwPDiC6PAgazJsB+3gaW3fDgn+qyAIY +REw== X-Gm-Message-State: ALoCoQkx1QEJDdvMKaXLZMPoJIQKrFkhXqya7S4wLwxI6dfuJOjztLE7KLDbEpOGIi43+hjUtcRO X-Received: by 10.180.10.138 with SMTP id i10mr17460552wib.81.1407344603419; Wed, 06 Aug 2014 10:03:23 -0700 (PDT) Received: from localhost.localdomain (cpc14-aztw22-2-0-cust189.18-1.cable.virginm.net. [82.45.1.190]) by mx.google.com with ESMTPSA id f6sm3712805wja.25.2014.08.06.10.03.21 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 06 Aug 2014 10:03:22 -0700 (PDT) From: Peter Griffin To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org, stern@rowland.harvard.edu, srinivas.kandagatla@gmail.com, maxime.coquelin@st.com, patrice.chotard@st.com, arnd@arndb.de Subject: [PATCH v3 2/6] usb: host: ehci-st: Add EHCI support for ST STB devices Date: Wed, 6 Aug 2014 18:03:05 +0100 Message-Id: <1407344589-24863-3-git-send-email-peter.griffin@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1407344589-24863-1-git-send-email-peter.griffin@linaro.org> References: <1407344589-24863-1-git-send-email-peter.griffin@linaro.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20140806_100347_265368_5A52E2F0 X-CRM114-Status: GOOD ( 21.73 ) X-Spam-Score: -0.7 (/) Cc: peter.griffin@linaro.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, lee.jones@linaro.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This patch adds the glue code required to ensure the on-chip EHCI controller works on STi consumer electronics SoC's from STMicroelectronics. It mainly manages the setting and enabling of the relevant clocks and manages the reset / power signals to the IP block. Signed-off-by: Peter Griffin --- drivers/usb/host/Kconfig | 6 + drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-st.c | 334 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 341 insertions(+) create mode 100644 drivers/usb/host/ehci-st.c diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a5e7f71..800969a 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -235,6 +235,12 @@ config USB_W90X900_EHCI ---help--- Enables support for the W90X900 USB controller +config USB_EHCI_ST + tristate "EHCI support for ST STB SoC Series" + depends on ARCH_STI && OF + help + Enable support for the ST SOC's on-chip EHCI controller. + config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" depends on ARCH_CNS3XXX diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index af0b81d..877f7e2 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o +obj-$(CONFIG_USB_EHCI_ST) += ehci-st.o usb-st-common.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c new file mode 100644 index 0000000..6f6f46d --- /dev/null +++ b/drivers/usb/host/ehci-st.c @@ -0,0 +1,334 @@ +/* + * ST EHCI driver + * + * Copyright (C) 2014 STMicroelectronics – All Rights Reserved + * + * Author: Peter Griffin + * + * Derived from ehci-platform.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ehci.h" +#include "usb-st-common.h" + +#define DRIVER_DESC "EHCI STMicroelectronics driver" + +#define hcd_to_ehci_priv(h) ((struct st_platform_priv *)hcd_to_ehci(h)->priv) + +static const char hcd_name[] = "ehci-st"; + +#define EHCI_CAPS_SIZE 0x10 +#define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84) + +int st_ehci_configure_bus(struct usb_hcd *hcd) +{ + /* Set EHCI packet buffer IN/OUT threshold to 128 bytes */ + u32 threshold = 128 | (128 << 16); + + writel(threshold, hcd->regs + AHB2STBUS_INSREG01); + return 0; +} + +static int st_ehci_platform_reset(struct usb_hcd *hcd) +{ + struct platform_device *pdev = to_platform_device(hcd->self.controller); + struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + if (pdata->pre_setup) { + retval = pdata->pre_setup(hcd); + if (retval < 0) + return retval; + } + + ehci->caps = hcd->regs + pdata->caps_offset; + retval = ehci_setup(hcd); + if (retval) + return retval; + + return 0; +} + +static int st_ehci_platform_power_on(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct st_platform_priv *priv = hcd_to_ehci_priv(hcd); + + return st_usb_platform_power_on(priv); +} + +static void st_ehci_platform_power_off(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct st_platform_priv *priv = hcd_to_ehci_priv(hcd); + + return st_usb_platform_power_off(priv); +} + +static struct hc_driver __read_mostly ehci_platform_hc_driver; + +static const struct ehci_driver_overrides platform_overrides __initconst = { + .reset = st_ehci_platform_reset, + .extra_priv_size = sizeof(struct st_platform_priv), +}; + +static struct usb_ehci_pdata ehci_platform_defaults = { + .power_on = st_ehci_platform_power_on, + .power_suspend = st_ehci_platform_power_off, + .power_off = st_ehci_platform_power_off, + .pre_setup = st_ehci_configure_bus, +}; + +static int st_ehci_platform_probe(struct platform_device *dev) +{ + struct usb_hcd *hcd; + struct resource *res_mem; + struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct st_platform_priv *priv; + struct ehci_hcd *ehci; + int err, irq, clk = 0; + + if (usb_disabled()) + return -ENODEV; + + /* + * Use reasonable defaults so platforms don't have to provide these + * with DT probing on ARM. + */ + if (!pdata) + pdata = &ehci_platform_defaults; + + err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); + if (err) + return err; + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "no irq provided"); + return irq; + } + res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res_mem) { + dev_err(&dev->dev, "no memory resource provided"); + return -ENXIO; + } + + hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + platform_set_drvdata(dev, hcd); + dev->dev.platform_data = pdata; + priv = hcd_to_ehci_priv(hcd); + ehci = hcd_to_ehci(hcd); + + if (pdata == &ehci_platform_defaults && dev->dev.of_node) { + priv->phy = devm_phy_get(&dev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); + if (err == -EPROBE_DEFER) + goto err_put_hcd; + priv->phy = NULL; + } + + for (clk = 0; clk < USB_MAX_CLKS; clk++) { + priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); + if (IS_ERR(priv->clks[clk])) { + err = PTR_ERR(priv->clks[clk]); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->clks[clk] = NULL; + break; + } + } + + /* some SoCs don't have a dedicated 48Mhz clock, but those that + do need the rate to be explicitly set */ + priv->clk48 = devm_clk_get(&dev->dev, "clk48"); + if (IS_ERR(priv->clk48)) { + dev_info(&dev->dev, "48MHz clk not found\n"); + priv->clk48 = NULL; + } + } + + priv->pwr = devm_reset_control_get_optional(&dev->dev, "power"); + if (IS_ERR(priv->pwr)) { + err = PTR_ERR(priv->pwr); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->pwr = NULL; + } + + priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset"); + if (IS_ERR(priv->rst)) { + err = PTR_ERR(priv->rst); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->rst = NULL; + } + + if (pdata->power_on) { + err = pdata->power_on(dev); + if (err < 0) + goto err_put_clks; + } + + hcd->rsrc_start = res_mem->start; + hcd->rsrc_len = resource_size(res_mem); + + hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); + goto err_put_clks; + } + + err = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (err) + goto err_put_clks; + + device_wakeup_enable(hcd->self.controller); + platform_set_drvdata(dev, hcd); + + return err; + +err_put_clks: + while (--clk >= 0) + clk_put(priv->clks[clk]); +err_put_hcd: + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + + usb_put_hcd(hcd); + + return err; +} + +static int st_ehci_platform_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct st_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk; + + usb_remove_hcd(hcd); + + if (pdata->power_off) + pdata->power_off(dev); + + for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) + clk_put(priv->clks[clk]); + + usb_put_hcd(hcd); + + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + + return 0; +} + +#ifdef CONFIG_PM + +static int st_ehci_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev_get_platdata(dev); + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + bool do_wakeup = device_may_wakeup(dev); + int ret; + + ret = ehci_suspend(hcd, do_wakeup); + if (ret) + return ret; + + if (pdata->power_suspend) + pdata->power_suspend(pdev); + + pinctrl_pm_select_sleep_state(dev); + + return ret; +} + +static int st_ehci_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev_get_platdata(dev); + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + int err; + + pinctrl_pm_select_default_state(dev); + + if (pdata->power_on) { + err = pdata->power_on(pdev); + if (err < 0) + return err; + } + + ehci_resume(hcd, false); + return 0; +} + +#endif /* CONFIG_PM */ + +static SIMPLE_DEV_PM_OPS(st_ehci_pm_ops, st_ehci_suspend, st_ehci_resume); + +static const struct of_device_id st_ehci_ids[] = { + { .compatible = "st,st-ehci-300x", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, st_ehci_ids); + +static struct platform_driver ehci_platform_driver = { + .probe = st_ehci_platform_probe, + .remove = st_ehci_platform_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "st-ehci", + .pm = &st_ehci_pm_ops, + .of_match_table = st_ehci_ids, + } +}; + +static int __init ehci_platform_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); + return platform_driver_register(&ehci_platform_driver); +} +module_init(ehci_platform_init); + +static void __exit ehci_platform_cleanup(void) +{ + platform_driver_unregister(&ehci_platform_driver); +} +module_exit(ehci_platform_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Peter Griffin "); +MODULE_LICENSE("GPL");