@@ -45,6 +45,8 @@ Optional properties:
string is used.
- cache-id-part: cache id part number to be used if it is not present
on hardware
+- cache-size : specifies the size in bytes of the cache
+- cache-sets : specifies the number of associativity sets of the cache
- interrupts : 1 combined interrupt.
- wt-override: If present then L2 is forced to Write through mode
@@ -945,6 +945,61 @@ static int l2_wt_override;
* pass it though the device tree */
static u32 cache_id_part_number_from_dt;
+static void __init l2x0_cache_size_of_parse(const struct device_node *np,
+ u32 *aux_val, u32 *aux_mask,
+ u32 max_way_size)
+{
+ u32 mask = 0, val = 0;
+ u32 size = 0, sets = 0;
+ u32 way_size = 0, way_size_bits = 1;
+
+ of_property_read_u32(np, "cache-size", &size);
+ of_property_read_u32(np, "cache-sets", &sets);
+
+ if (!size || !sets)
+ return;
+
+ way_size = size / sets;
+
+ if (way_size > max_way_size) {
+ pr_warn("L2C: way size %dKB is too large\n", way_size >> 10);
+ return;
+ }
+
+ way_size >>= 10;
+ switch (way_size) {
+ case 512:
+ way_size_bits = 6;
+ break;
+ case 256:
+ way_size_bits = 5;
+ break;
+ case 128:
+ way_size_bits = 4;
+ break;
+ case 64:
+ way_size_bits = 3;
+ break;
+ case 32:
+ way_size_bits = 2;
+ break;
+ case 16:
+ way_size_bits = 1;
+ break;
+ default:
+ pr_err("cache way size: %d KB is not mapped\n",
+ way_size);
+ break;
+ }
+
+ mask |= L2C_AUX_CTRL_WAY_SIZE_MASK;
+ val |= (way_size_bits << L2C_AUX_CTRL_WAY_SIZE_SHIFT);
+
+ *aux_val &= ~mask;
+ *aux_val |= val;
+ *aux_mask &= ~mask;
+}
+
static void __init l2x0_of_parse(const struct device_node *np,
u32 *aux_val, u32 *aux_mask)
{
@@ -974,6 +1029,8 @@ static void __init l2x0_of_parse(const struct device_node *np,
val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
}
+ l2x0_cache_size_of_parse(np, aux_val, aux_mask, SZ_256K);
+
*aux_val &= ~mask;
*aux_val |= val;
*aux_mask &= ~mask;
@@ -1047,6 +1104,8 @@ static void __init l2c310_of_parse(const struct device_node *np,
writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN,
l2x0_base + L310_ADDR_FILTER_START);
}
+
+ l2x0_cache_size_of_parse(np, aux_val, aux_mask, SZ_512K);
}
static const struct l2c_init_data of_l2c310_data __initconst = {
@@ -1253,6 +1312,8 @@ static void __init aurora_of_parse(const struct device_node *np,
*aux_val &= ~mask;
*aux_val |= val;
*aux_mask &= ~mask;
+
+ l2x0_cache_size_of_parse(np, aux_val, aux_mask, SZ_256K);
}
static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
When both 'cache-size' and 'cache-sets' are specified for a L2 cache controller node, parse those properties and make sure we validate the way_size based on which type of L2 cache controller we are using. Update the L2 cache controller Device Tree binding with the optional 'cache-size' and 'cache-sets' properties. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Documentation/devicetree/bindings/arm/l2cc.txt | 2 + arch/arm/mm/cache-l2x0.c | 61 ++++++++++++++++++++++++++ 2 files changed, 63 insertions(+)