@@ -117,14 +117,6 @@ config MACH_SCB9328
help
Say Y here if you are using a Synertronixx scb9328 board
-config MACH_APF9328
- bool "APF9328"
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX1
- help
- Say Yes here if you are using the Armadeus APF9328 development board
-
config MACH_IMX1_DT
bool "Support i.MX1 platforms from device tree"
select SOC_IMX1
@@ -42,7 +42,6 @@ endif
# i.MX1 based machines
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
-obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
# i.MX21 based machines
deleted file mode 100644
@@ -1,148 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/mach-apf9328.c
- *
- * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
- *
- * This work is based on mach-scb9328.c which is:
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int apf9328_pins[] __initconst = {
- /* UART1 */
- PC9_PF_UART1_CTS,
- PC10_PF_UART1_RTS,
- PC11_PF_UART1_TXD,
- PC12_PF_UART1_RXD,
- /* UART2 */
- PB28_PF_UART2_CTS,
- PB29_PF_UART2_RTS,
- PB30_PF_UART2_TXD,
- PB31_PF_UART2_RXD,
- /* I2C */
- PA15_PF_I2C_SDA,
- PA16_PF_I2C_SCL,
-};
-
-/*
- * The APF9328 can have up to 32MB NOR Flash
- */
-static struct resource flash_resource = {
- .start = MX1_CS0_PHYS,
- .end = MX1_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data apf9328_flash_data = {
- .width = 2,
-};
-
-static struct platform_device apf9328_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &apf9328_flash_data,
- },
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
-/*
- * APF9328 has a DM9000 Ethernet controller
- */
-static struct dm9000_plat_data dm9000_setup = {
- .flags = DM9000_PLATF_16BITONLY
-};
-
-static struct resource dm9000_resources[] = {
- {
- .start = MX1_CS4_PHYS + 0x00C00000,
- .end = MX1_CS4_PHYS + 0x00C00001,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX1_CS4_PHYS + 0x00C00002,
- .end = MX1_CS4_PHYS + 0x00C00003,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device dm9000x_device = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm9000_resources),
- .resource = dm9000_resources,
- .dev = {
- .platform_data = &dm9000_setup,
- }
-};
-
-static const struct imxuart_platform_data uart1_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
- &apf9328_flash_device,
- &dm9000x_device,
-};
-
-static void __init apf9328_init(void)
-{
- imx1_soc_init();
-
- mxc_gpio_setup_multiple_pins(apf9328_pins,
- ARRAY_SIZE(apf9328_pins),
- "APF9328");
-
- imx1_add_imx_uart0(NULL);
- imx1_add_imx_uart1(&uart1_pdata);
-
- imx1_add_imx_i2c(&apf9328_i2c_data);
-
- dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
- dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init apf9328_timer_init(void)
-{
- mx1_clocks_init(32768);
-}
-
-MACHINE_START(APF9328, "Armadeus APF9328")
- /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
- .map_io = mx1_map_io,
- .init_early = imx1_init_early,
- .init_irq = mx1_init_irq,
- .init_time = apf9328_timer_init,
- .init_machine = apf9328_init,
- .restart = mxc_restart,
-MACHINE_END
mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts, so remove the board file. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- arch/arm/mach-imx/Kconfig | 8 --- arch/arm/mach-imx/Makefile | 1 - arch/arm/mach-imx/mach-apf9328.c | 148 --------------------------------------- 3 files changed, 157 deletions(-) delete mode 100644 arch/arm/mach-imx/mach-apf9328.c