@@ -401,8 +401,9 @@
reg = <0x02098000 0x4000>;
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
- <&clks IMX6QDL_CLK_GPT_IPG_PER>;
- clock-names = "ipg", "per";
+ <&clks IMX6QDL_CLK_GPT_IPG_PER>,
+ <&clks IMX6QDL_CLK_GPT_3M>;
+ clock-names = "ipg", "per", "osc_per";
};
gpio1: gpio@0209c000 {
@@ -421,7 +421,7 @@
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_GPT_BUS>,
- <&clks IMX6SX_CLK_GPT_SERIAL>;
+ <&clks IMX6SX_CLK_GPT_3M>;
clock-names = "ipg", "per";
};
Original gpt per clk parent is from ipg_per clk which may be scaled when system enter low bus mode, as ipg clk will be lower in low bus mode, to keep system clk NOT drift, select gpt per clk parent from OSC which is at fixed freq always. On i.mx6qdl, add a osc_per clk source for i.mx6q TO > 1.0 and all i.MX6dl SoC. On i.mx6sx, just make gpt per clk from OSC. Signed-off-by: Anson Huang <b20788@freescale.com> --- arch/arm/boot/dts/imx6qdl.dtsi | 5 +++-- arch/arm/boot/dts/imx6sx.dtsi | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-)