@@ -348,6 +348,13 @@ choice
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on KEYSTONE2 devices.
+ config DEBUG_MESON_UARTAO
+ bool "Kernel low-level debugging via Meson6 UARTAO"
+ depends on ARCH_MESON
+ help
+ Say Y here if you want kernel low-lever debugging support
+ on Amlogic Meson6 based platforms on the UARTAO.
+
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
depends on ARCH_MMP
@@ -1011,6 +1018,7 @@ config DEBUG_LL_INCLUDE
string
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+ default "debug/meson.S" if DEBUG_MESON_UARTAO
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/efm32.S" if DEBUG_LL_UART_EFM32
@@ -1106,6 +1114,7 @@ config DEBUG_UART_PHYS
default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xd0012000 if DEBUG_MVEBU_UART
+ default 0xc81004c0 if DEBUG_MESON_UARTAO
default 0xd4017000 if DEBUG_MMP_UART2
default 0xd4018000 if DEBUG_MMP_UART3
default 0xe0000000 if ARCH_SPEAR13XX
@@ -1125,7 +1134,7 @@ config DEBUG_UART_PHYS
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
- DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_VIRT
@@ -1162,6 +1171,7 @@ config DEBUG_UART_VIRT
default 0xfd012000 if ARCH_MV78XX0
default 0xfde12000 if ARCH_DOVE
default 0xfe012000 if ARCH_ORION5X
+ default 0xf31004c0 if DEBUG_MESON_UARTAO
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1193,7 +1203,7 @@ config DEBUG_UART_VIRT
default 0xff003000 if DEBUG_U300_UART
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
- DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_8250_SHIFT
new file mode 100644
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 Carlo Caione
+ * Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define MESON_AO_UART_WFIFO 0x0
+#define MESON_AO_UART_STATUS 0xc
+
+#define MESON_AO_UART_TX_FIFO_EMPTY (1 << 22)
+#define MESON_AO_UART_TX_FIFO_FULL (1 << 21)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =(CONFIG_DEBUG_UART_PHYS) @ physical
+ ldr \rv, =(CONFIG_DEBUG_UART_VIRT) @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #MESON_AO_UART_WFIFO]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #MESON_AO_UART_STATUS]
+ tst \rd, #MESON_AO_UART_TX_FIFO_EMPTY
+ beq 1002b
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #MESON_AO_UART_STATUS]
+ tst \rd, #MESON_AO_UART_TX_FIFO_FULL
+ bne 1001b
+ .endm
Add the UART definitions needed to support earlyprintk for MesonX SoCs on UARTAO. Signed-off-by: Carlo Caione <carlo@caione.org> --- arch/arm/Kconfig.debug | 14 ++++++++++++-- arch/arm/include/debug/meson.S | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+), 2 deletions(-) create mode 100644 arch/arm/include/debug/meson.S