@@ -116,6 +116,7 @@ void imx_anatop_post_resume(void);
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
void imx6q_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
+int imx_mmdc_get_ddr_type(void);
void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
@@ -21,6 +21,12 @@
#define BP_MMDC_MAPSR_PSD 0
#define BP_MMDC_MAPSR_PSS 4
+#define MMDC_MDMISC 0x18
+#define BM_MMDC_MDMISC_DDR_TYPE 0x18
+#define BP_MMDC_MDMISC_DDR_TYPE 0x3
+
+static int ddr_type;
+
static int imx_mmdc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -31,6 +37,12 @@ static int imx_mmdc_probe(struct platform_device *pdev)
mmdc_base = of_iomap(np, 0);
WARN_ON(!mmdc_base);
+ reg = mmdc_base + MMDC_MDMISC;
+ /* Get ddr type */
+ val = readl_relaxed(reg);
+ ddr_type = (val & BM_MMDC_MDMISC_DDR_TYPE) >>
+ BP_MMDC_MDMISC_DDR_TYPE;
+
reg = mmdc_base + MMDC_MAPSR;
/* Enable automatic power saving */
@@ -51,6 +63,11 @@ static int imx_mmdc_probe(struct platform_device *pdev)
return 0;
}
+int imx_mmdc_get_ddr_type(void)
+{
+ return ddr_type;
+}
+
static struct of_device_id imx_mmdc_dt_ids[] = {
{ .compatible = "fsl,imx6q-mmdc", },
{ /* sentinel */ }
@@ -55,6 +55,8 @@
#define IMX_CHIP_REVISION_3_3 0x33
#define IMX_CHIP_REVISION_UNKNOWN 0xff
+#define DDR_TYPE_LPDDR2 1
+
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
#endif
@@ -88,7 +88,7 @@ struct imx6_pm_base {
};
struct imx6_pm_socdata {
- u32 cpu_type;
+ u32 ddr_type;
const char *mmdc_compat;
const char *src_compat;
const char *iomuxc_compat;
@@ -138,7 +138,6 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = {
};
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
- .cpu_type = MXC_CPU_IMX6Q,
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6q-iomuxc",
@@ -148,7 +147,6 @@ static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
};
static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
- .cpu_type = MXC_CPU_IMX6DL,
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6dl-iomuxc",
@@ -158,7 +156,6 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
};
static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
- .cpu_type = MXC_CPU_IMX6SL,
.mmdc_compat = "fsl,imx6sl-mmdc",
.src_compat = "fsl,imx6sl-src",
.iomuxc_compat = "fsl,imx6sl-iomuxc",
@@ -168,7 +165,6 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
};
static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
- .cpu_type = MXC_CPU_IMX6SX,
.mmdc_compat = "fsl,imx6sx-mmdc",
.src_compat = "fsl,imx6sx-src",
.iomuxc_compat = "fsl,imx6sx-iomuxc",
@@ -187,7 +183,7 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
struct imx6_cpu_pm_info {
phys_addr_t pbase; /* The physical address of pm_info. */
phys_addr_t resume_addr; /* The physical resume address for asm code */
- u32 cpu_type;
+ u32 ddr_type;
u32 pm_info_size; /* Size of pm_info. */
struct imx6_pm_base mmdc_base;
struct imx6_pm_base src_base;
@@ -522,7 +518,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
goto pl310_cache_map_failed;
}
- pm_info->cpu_type = socdata->cpu_type;
+ pm_info->ddr_type = imx_mmdc_get_ddr_type();
pm_info->mmdc_io_num = socdata->mmdc_io_num;
mmdc_offset_array = socdata->mmdc_io_offset;
@@ -45,7 +45,7 @@
*/
#define PM_INFO_PBASE_OFFSET 0x0
#define PM_INFO_RESUME_ADDR_OFFSET 0x4
-#define PM_INFO_CPU_TYPE_OFFSET 0x8
+#define PM_INFO_DDR_TYPE_OFFSET 0x8
#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC
#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10
#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14
@@ -110,7 +110,7 @@
ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
- cmp r3, #MXC_CPU_IMX6SL
+ cmp r3, #DDR_TYPE_LPDDR2
bne 4f
/* reset read FIFO, RST_RD_FIFO */
@@ -151,7 +151,7 @@
ENTRY(imx6_suspend)
ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
- ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+ ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
/*
@@ -209,8 +209,8 @@ poll_dvfs_set:
ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET
add r8, r8, r0
- /* i.MX6SL's last 3 IOs need special setting */
- cmp r3, #MXC_CPU_IMX6SL
+ /* LPDDR2's last 3 IOs need special setting */
+ cmp r3, #DDR_TYPE_LPDDR2
subeq r7, r7, #0x3
set_mmdc_io_lpm:
ldr r9, [r8], #0x8
@@ -218,7 +218,7 @@ set_mmdc_io_lpm:
subs r7, r7, #0x1
bne set_mmdc_io_lpm
- cmp r3, #MXC_CPU_IMX6SL
+ cmp r3, #DDR_TYPE_LPDDR2
bne set_mmdc_io_lpm_done
ldr r6, =0x1000
ldr r9, [r8], #0x8
@@ -324,7 +324,7 @@ resume:
str r7, [r11, #MX6Q_SRC_GPR1]
str r7, [r11, #MX6Q_SRC_GPR2]
- ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+ ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
mov r5, #0x1
resume_mmdc
As the DDR/IO and MMDC setting are different on LPDDR2 and DDR3, we used cpu type to decide how to do these settings in suspend before which is NOT flexible, take i.MX6SL for example, although it has LPDDR2 on EVK board, but users can also use DDR3 on other boards, so it is better to read the DDR type from MMDC then decide how to do related settings. Signed-off-by: Anson Huang <b20788@freescale.com> --- changes from v1 -> v2 move DDR_TYPE definition to common place of mxc.h arch/arm/mach-imx/common.h | 1 + arch/arm/mach-imx/mmdc.c | 17 +++++++++++++++++ arch/arm/mach-imx/mxc.h | 2 ++ arch/arm/mach-imx/pm-imx6.c | 10 +++------- arch/arm/mach-imx/suspend-imx6.S | 14 +++++++------- 5 files changed, 30 insertions(+), 14 deletions(-)