| Message ID | 1413192963-11153-4-git-send-email-jingchang.lu@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Oct 13, 2014 at 05:36:00PM +0800, Jingchang Lu wrote: > Signed-off-by: Chen Lu <B46807@freescale.com> > Signed-off-by: Chao Fu <B44548@freescale.com> > Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Have something in the commit log, please. > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/ls1021a-twr.dts | 127 ++++++++++++++++++++++++++++++++++++++ > 2 files changed, 128 insertions(+) > create mode 100755 arch/arm/boot/dts/ls1021a-twr.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f89e5da..dfc7deb 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -252,6 +252,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ > imx6sl-evk.dtb \ > imx6sx-sdb.dtb \ > ls1021a-qds.dtb \ > + ls1021a-twr.dtb \ > vf610-colibri-eval-v3.dtb \ > vf610-cosmic.dtb \ > vf610-twr.dtb > diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts > new file mode 100755 > index 0000000..1e463fe > --- /dev/null > +++ b/arch/arm/boot/dts/ls1021a-twr.dts > @@ -0,0 +1,127 @@ > +/* > + * Copyright 2013-2014 Freescale Semiconductor, Inc. > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this library; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "ls1021a.dtsi" > + > +/ { > + model = "LS1021A TWR Board"; > + > + aliases { > + enet2_rgmii_phy = &rgmii_phy1; > + enet0_sgmii_phy = &sgmii_phy2; > + enet1_sgmii_phy = &sgmii_phy0; > + }; > +}; > + > +&dspi1 { > + bus-num = <0>; > + status = "okay"; > + > + dspiflash: s25fl064k@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "spansion,s25fl064k"; Is this a documented compatible? > + spi-max-frequency = <16000000>; > + spi-cpol; > + spi-cpha; > + reg = <0>; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > +}; > + > +&ifc { > + #address-cells = <2>; > + #size-cells = <1>; > + /* NOR, and CPLD on board */ > + ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; > + status = "okay"; > + > + nor@0,0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "cfi-flash"; > + reg = <0x0 0x0 0x8000000>; > + bank-width = <2>; > + device-width = <1>; > + }; > +}; > + > +&lpuart0 { > + status = "okay"; > +}; > + > +&mdio0 { > + sgmii_phy0: ethernet-phy@0 { > + reg = <0x0>; > + }; Please have new line between nodes. > + rgmii_phy1: ethernet-phy@1 { > + reg = <0x1>; > + }; > + sgmii_phy2: ethernet-phy@2 { > + reg = <0x2>; > + }; > + tbi1: tbi-phy@1f { > + reg = <0x1f>; > + device_type = "tbi-phy"; I cannot find this "tbi-phy" documented anywhere in the bindings folder. Shawn > + }; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart1 { > + status = "okay"; > +}; > -- > 1.8.0 >
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f89e5da..dfc7deb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -252,6 +252,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ ls1021a-qds.dtb \ + ls1021a-twr.dtb \ vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts new file mode 100755 index 0000000..1e463fe --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -0,0 +1,127 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A TWR Board"; + + aliases { + enet2_rgmii_phy = &rgmii_phy1; + enet0_sgmii_phy = &sgmii_phy2; + enet1_sgmii_phy = &sgmii_phy0; + }; +}; + +&dspi1 { + bus-num = <0>; + status = "okay"; + + dspiflash: s25fl064k@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl064k"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, and CPLD on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + sgmii_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +};