| Message ID | 1413870237-1821-7-git-send-email-a.kesavan@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Abhilash, On Tue, Oct 21, 2014 at 11:13 AM, Abhilash Kesavan <a.kesavan@samsung.com> wrote: > Add nodes for 3 mmc channels, 12 i2c channels, rtc, and watchdog > on Exynos7. > > Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> > Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 41 ++++ > arch/arm64/boot/dts/exynos/exynos7.dtsi | 256 +++++++++++++++++++++++ > 2 files changed, 297 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > index e2c8283..d081c26 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > @@ -18,6 +18,8 @@ > > aliases { > serial0 = &serial_2; > + mshc0 = &mmc_0; > + mshc2 = &mmc_2; > }; > > chosen { > @@ -37,3 +39,42 @@ > &serial_2 { > status = "okay"; > }; > + > +&rtc { > + status = "okay"; > +}; > + > +&watchdog { > + status = "okay"; > +}; > + > +&mmc_0 { > + status = "okay"; > + num-slots = <1>; > + broken-cd; > + caps2-mmc-hs200-1_8v; Please use mmc_hs200-1_8v instead. > + supports-highspeed; As per synopsys-dw-mshc DT binding documentation, supports-highspeed property is deprecated, so please use common DT binding for this, which is "cap-mmc-highspeed". > + non-removable; > + card-detect-delay = <200>; > + clock-frequency = <800000000>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <0 4>; > + samsung,dw-mshc-ddr-timing = <0 2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; > + bus-width = <8>; > +}; > + > +&mmc_2 { > + status = "okay"; > + num-slots = <1>; > + supports-highspeed; Here also common DT binding please "cap-sd-highspeed" > + card-detect-delay = <200>; > + clock-frequency = <400000000>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <2 3>; > + samsung,dw-mshc-ddr-timing = <1 2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; > + bus-width = <4>; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index 6db8c78..1300ded 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -113,6 +113,27 @@ > "dout_sclk_mfc_pll"; > }; > > + clock_top1: clock-controller@105e0000 { > + compatible = "samsung,exynos7-clock-top1"; > + reg = <0x105e0000 0xb000>; > + #clock-cells = <1>; > + clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, > + <&clock_topc DOUT_SCLK_BUS1_PLL>, > + <&clock_topc DOUT_SCLK_CC_PLL>, > + <&clock_topc DOUT_SCLK_MFC_PLL>; > + clock-names = "fin_pll", "dout_sclk_bus0_pll", > + "dout_sclk_bus1_pll", "dout_sclk_cc_pll", > + "dout_sclk_mfc_pll"; > + }; > + > + clock_ccore: clock-controller@105b0000 { > + compatible = "samsung,exynos7-clock-ccore"; > + reg = <0x105b0000 0xd00>; > + #clock-cells = <1>; > + clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>; > + clock-names = "fin_pll", "dout_aclk_ccore_133"; > + }; > + > clock_peric0: clock-controller@13610000 { > compatible = "samsung,exynos7-clock-peric0"; > reg = <0x13610000 0xd00>; > @@ -143,6 +164,27 @@ > clock-names = "fin_pll", "dout_aclk_peris_66"; > }; > > + clock_fsys0: clock-controller@10e90000 { > + compatible = "samsung,exynos7-clock-fsys0"; > + reg = <0x10e90000 0xd00>; > + #clock-cells = <1>; > + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>, > + <&clock_top1 DOUT_SCLK_MMC2>; > + clock-names = "fin_pll", "dout_aclk_fsys0_200", > + "dout_sclk_mmc2"; > + }; > + > + clock_fsys1: clock-controller@156e0000 { > + compatible = "samsung,exynos7-clock-fsys1"; > + reg = <0x156e0000 0xd00>; > + #clock-cells = <1>; > + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, > + <&clock_top1 DOUT_SCLK_MMC0>, > + <&clock_top1 DOUT_SCLK_MMC1>; > + clock-names = "fin_pll", "dout_aclk_fsys1_200", > + "dout_sclk_mmc0", "dout_sclk_mmc1"; > + }; > + > serial_0: serial@13630000 { > compatible = "samsung,exynos4210-uart"; > reg = <0x13630000 0x100>; > @@ -236,6 +278,162 @@ > interrupts = <0 203 0>; > }; > > + hsi2c_0: hsi2c@13640000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x13640000 0x1000>; > + interrupts = <0 441 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c0_bus>; > + clocks = <&clock_peric0 PCLK_HSI2C0>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_1: hsi2c@13650000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x13650000 0x1000>; > + interrupts = <0 442 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c1_bus>; > + clocks = <&clock_peric0 PCLK_HSI2C1>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_2: hsi2c@14e60000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e60000 0x1000>; > + interrupts = <0 459 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c2_bus>; > + clocks = <&clock_peric1 PCLK_HSI2C2>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_3: hsi2c@14e70000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e70000 0x1000>; > + interrupts = <0 460 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c3_bus>; > + clocks = <&clock_peric1 PCLK_HSI2C3>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_4: hsi2c@13660000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x13660000 0x1000>; > + interrupts = <0 443 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c4_bus>; > + clocks = <&clock_peric0 PCLK_HSI2C4>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_5: hsi2c@13670000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x13670000 0x1000>; > + interrupts = <0 444 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c5_bus>; > + clocks = <&clock_peric0 PCLK_HSI2C5>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_6: hsi2c@14e00000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e00000 0x1000>; > + interrupts = <0 461 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c6_bus>; > + clocks = <&clock_peric1 PCLK_HSI2C6>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_7: hsi2c@13e10000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x13e10000 0x1000>; > + interrupts = <0 462 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c7_bus>; > + clocks = <&clock_peric1 PCLK_HSI2C7>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_8: hsi2c@14e20000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e20000 0x1000>; > + interrupts = <0 463 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c8_bus>; > + clocks = <&clock_peric1 PCLK_HSI2C8>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_9: hsi2c@13680000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x13680000 0x1000>; > + interrupts = <0 445 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c9_bus>; > + clocks = <&clock_peric0 PCLK_HSI2C9>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_10: hsi2c@13690000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x13690000 0x1000>; > + interrupts = <0 446 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c10_bus>; > + clocks = <&clock_peric0 PCLK_HSI2C10>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_11: hsi2c@136a0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x136a0000 0x1000>; > + interrupts = <0 447 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c11_bus>; > + clocks = <&clock_peric0 PCLK_HSI2C11>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > timer { > compatible = "arm,armv8-timer"; > interrupts = <1 13 0xff01>, > @@ -248,6 +446,64 @@ > compatible = "samsung,exynos7-pmu", "syscon"; > reg = <0x105c0000 0x5000>; > }; > + > + rtc: rtc@10590000 { > + compatible = "samsung,s3c6410-rtc"; > + reg = <0x10590000 0x100>; > + interrupts = <0 355 0>, <0 356 0>; > + clocks = <&clock_ccore PCLK_RTC>; > + clock-names = "rtc"; > + status = "disabled"; > + }; > + > + watchdog: watchdog@101d0000 { > + compatible = "samsung,exynos7-wdt"; > + reg = <0x101d0000 0x100>; > + interrupts = <0 110 0>; > + clocks = <&clock_peris PCLK_WDT>; > + clock-names = "watchdog"; > + samsung,syscon-phandle = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + mmc_0: mmc@15740000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = <0 201 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15740000 0x2000>; > + clocks = <&clock_fsys1 ACLK_MMC0>, > + <&clock_top1 CLK_SCLK_MMC0>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mmc_1: mmc@15750000 { > + compatible = "samsung,exynos7-dw-mshc"; > + interrupts = <0 202 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15750000 0x2000>; > + clocks = <&clock_fsys1 ACLK_MMC1>, > + <&clock_top1 CLK_SCLK_MMC1>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mmc_2: mmc@15560000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = <0 216 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15560000 0x2000>; > + clocks = <&clock_fsys0 ACLK_MMC2>, > + <&clock_top1 CLK_SCLK_MMC2>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > }; > }; > > -- > 1.7.9.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 21.10.2014 15:52, Alim Akhtar wrote: >> +&mmc_0 { >> + status = "okay"; >> + num-slots = <1>; >> + broken-cd; >> + caps2-mmc-hs200-1_8v; > Please use mmc_hs200-1_8v instead. I guess you mean "mmc-hs200-1_8v" (with a hyphen between mmc and hs200). >> + supports-highspeed; > As per synopsys-dw-mshc DT binding documentation, supports-highspeed > property is deprecated, so please use common DT binding for this, > which is "cap-mmc-highspeed". >> + non-removable; >> + card-detect-delay = <200>; >> + clock-frequency = <800000000>; >> + samsung,dw-mshc-ciu-div = <3>; >> + samsung,dw-mshc-sdr-timing = <0 4>; >> + samsung,dw-mshc-ddr-timing = <0 2>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; >> + bus-width = <8>; >> +}; >> + >> +&mmc_2 { >> + status = "okay"; >> + num-slots = <1>; >> + supports-highspeed; > Here also common DT binding please "cap-sd-highspeed" Above you suggest "cap-mmc-highspeed" to replace the same deprecated property, but here "cap-sd-highspeed". What is the rationale behind using only one particular new property and not both for both controllers? Best regards, Tomasz
Hi Tomasz, On Tue, Oct 21, 2014 at 7:30 PM, Tomasz Figa <tomasz.figa@gmail.com> wrote: > On 21.10.2014 15:52, Alim Akhtar wrote: >>> +&mmc_0 { >>> + status = "okay"; >>> + num-slots = <1>; >>> + broken-cd; >>> + caps2-mmc-hs200-1_8v; >> Please use mmc_hs200-1_8v instead. > > I guess you mean "mmc-hs200-1_8v" (with a hyphen between mmc and hs200). > Yes, right, that was a typo. Thanks. >>> + supports-highspeed; >> As per synopsys-dw-mshc DT binding documentation, supports-highspeed >> property is deprecated, so please use common DT binding for this, >> which is "cap-mmc-highspeed". >>> + non-removable; >>> + card-detect-delay = <200>; >>> + clock-frequency = <800000000>; >>> + samsung,dw-mshc-ciu-div = <3>; >>> + samsung,dw-mshc-sdr-timing = <0 4>; >>> + samsung,dw-mshc-ddr-timing = <0 2>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; >>> + bus-width = <8>; >>> +}; >>> + >>> +&mmc_2 { >>> + status = "okay"; >>> + num-slots = <1>; >>> + supports-highspeed; >> Here also common DT binding please "cap-sd-highspeed" > > Above you suggest "cap-mmc-highspeed" to replace the same deprecated > property, but here "cap-sd-highspeed". What is the rationale behind > using only one particular new property and not both for both controllers? > Well, on this particular board dw_mmc channels are dedicated to use only one kind of card. e.g. mmc_0 is for eMMC and which is non-removable and mmc_2 is for SD cards. Although controller supports both the properties on all channel on this SoC. > Best regards, > Tomasz
Hi Alim and Tomasz, Thanks for the review. On Wed, Oct 22, 2014 at 3:05 AM, Alim Akhtar <alim.akhtar@gmail.com> wrote: > Hi Tomasz, > > On Tue, Oct 21, 2014 at 7:30 PM, Tomasz Figa <tomasz.figa@gmail.com> wrote: >> On 21.10.2014 15:52, Alim Akhtar wrote: >>>> +&mmc_0 { >>>> + status = "okay"; >>>> + num-slots = <1>; >>>> + broken-cd; >>>> + caps2-mmc-hs200-1_8v; >>> Please use mmc_hs200-1_8v instead. >> >> I guess you mean "mmc-hs200-1_8v" (with a hyphen between mmc and hs200). >> > Yes, right, that was a typo. Thanks. Will modify it to "mmc-hs200-1_8v". >>>> + supports-highspeed; >>> As per synopsys-dw-mshc DT binding documentation, supports-highspeed >>> property is deprecated, so please use common DT binding for this, >>> which is "cap-mmc-highspeed". >>>> + non-removable; >>>> + card-detect-delay = <200>; >>>> + clock-frequency = <800000000>; >>>> + samsung,dw-mshc-ciu-div = <3>; >>>> + samsung,dw-mshc-sdr-timing = <0 4>; >>>> + samsung,dw-mshc-ddr-timing = <0 2>; >>>> + pinctrl-names = "default"; >>>> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; >>>> + bus-width = <8>; >>>> +}; >>>> + >>>> +&mmc_2 { >>>> + status = "okay"; >>>> + num-slots = <1>; >>>> + supports-highspeed; >>> Here also common DT binding please "cap-sd-highspeed" >> >> Above you suggest "cap-mmc-highspeed" to replace the same deprecated >> property, but here "cap-sd-highspeed". What is the rationale behind >> using only one particular new property and not both for both controllers? >> > Well, on this particular board dw_mmc channels are dedicated to use > only one kind of card. e.g. mmc_0 is for eMMC and which is > non-removable and mmc_2 is for SD cards. Although controller supports > both the properties on all channel on this SoC. Will use "cap-sd/mmc-highspeed" instead of "supports-highspeed". Regards, Abhilash > >> Best regards, >> Tomasz > > > > -- > Regards, > Alim > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index e2c8283..d081c26 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -18,6 +18,8 @@ aliases { serial0 = &serial_2; + mshc0 = &mmc_0; + mshc2 = &mmc_2; }; chosen { @@ -37,3 +39,42 @@ &serial_2 { status = "okay"; }; + +&rtc { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + caps2-mmc-hs200-1_8v; + supports-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <800000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 6db8c78..1300ded 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -113,6 +113,27 @@ "dout_sclk_mfc_pll"; }; + clock_top1: clock-controller@105e0000 { + compatible = "samsung,exynos7-clock-top1"; + reg = <0x105e0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; + + clock_ccore: clock-controller@105b0000 { + compatible = "samsung,exynos7-clock-ccore"; + reg = <0x105b0000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>; + clock-names = "fin_pll", "dout_aclk_ccore_133"; + }; + clock_peric0: clock-controller@13610000 { compatible = "samsung,exynos7-clock-peric0"; reg = <0x13610000 0xd00>; @@ -143,6 +164,27 @@ clock-names = "fin_pll", "dout_aclk_peris_66"; }; + clock_fsys0: clock-controller@10e90000 { + compatible = "samsung,exynos7-clock-fsys0"; + reg = <0x10e90000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>, + <&clock_top1 DOUT_SCLK_MMC2>; + clock-names = "fin_pll", "dout_aclk_fsys0_200", + "dout_sclk_mmc2"; + }; + + clock_fsys1: clock-controller@156e0000 { + compatible = "samsung,exynos7-clock-fsys1"; + reg = <0x156e0000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, + <&clock_top1 DOUT_SCLK_MMC0>, + <&clock_top1 DOUT_SCLK_MMC1>; + clock-names = "fin_pll", "dout_aclk_fsys1_200", + "dout_sclk_mmc0", "dout_sclk_mmc1"; + }; + serial_0: serial@13630000 { compatible = "samsung,exynos4210-uart"; reg = <0x13630000 0x100>; @@ -236,6 +278,162 @@ interrupts = <0 203 0>; }; + hsi2c_0: hsi2c@13640000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13640000 0x1000>; + interrupts = <0 441 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c0_bus>; + clocks = <&clock_peric0 PCLK_HSI2C0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@13650000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13650000 0x1000>; + interrupts = <0 442 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c1_bus>; + clocks = <&clock_peric0 PCLK_HSI2C1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@14e60000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e60000 0x1000>; + interrupts = <0 459 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c2_bus>; + clocks = <&clock_peric1 PCLK_HSI2C2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@14e70000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e70000 0x1000>; + interrupts = <0 460 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c3_bus>; + clocks = <&clock_peric1 PCLK_HSI2C3>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_4: hsi2c@13660000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13660000 0x1000>; + interrupts = <0 443 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c4_bus>; + clocks = <&clock_peric0 PCLK_HSI2C4>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: hsi2c@13670000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13670000 0x1000>; + interrupts = <0 444 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c5_bus>; + clocks = <&clock_peric0 PCLK_HSI2C5>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: hsi2c@14e00000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e00000 0x1000>; + interrupts = <0 461 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c6_bus>; + clocks = <&clock_peric1 PCLK_HSI2C6>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: hsi2c@13e10000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13e10000 0x1000>; + interrupts = <0 462 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c7_bus>; + clocks = <&clock_peric1 PCLK_HSI2C7>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: hsi2c@14e20000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e20000 0x1000>; + interrupts = <0 463 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c8_bus>; + clocks = <&clock_peric1 PCLK_HSI2C8>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: hsi2c@13680000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13680000 0x1000>; + interrupts = <0 445 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c9_bus>; + clocks = <&clock_peric0 PCLK_HSI2C9>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: hsi2c@13690000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13690000 0x1000>; + interrupts = <0 446 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c10_bus>; + clocks = <&clock_peric0 PCLK_HSI2C10>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_11: hsi2c@136a0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x136a0000 0x1000>; + interrupts = <0 447 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c11_bus>; + clocks = <&clock_peric0 PCLK_HSI2C11>; + clock-names = "hsi2c"; + status = "disabled"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 0xff01>, @@ -248,6 +446,64 @@ compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x105c0000 0x5000>; }; + + rtc: rtc@10590000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10590000 0x100>; + interrupts = <0 355 0>, <0 356 0>; + clocks = <&clock_ccore PCLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + watchdog: watchdog@101d0000 { + compatible = "samsung,exynos7-wdt"; + reg = <0x101d0000 0x100>; + interrupts = <0 110 0>; + clocks = <&clock_peris PCLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mmc_0: mmc@15740000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 201 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15740000 0x2000>; + clocks = <&clock_fsys1 ACLK_MMC0>, + <&clock_top1 CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_1: mmc@15750000 { + compatible = "samsung,exynos7-dw-mshc"; + interrupts = <0 202 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15750000 0x2000>; + clocks = <&clock_fsys1 ACLK_MMC1>, + <&clock_top1 CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_2: mmc@15560000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 216 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15560000 0x2000>; + clocks = <&clock_fsys0 ACLK_MMC2>, + <&clock_top1 CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; }; };