| Message ID | 1415099728-10959-3-git-send-email-vigneshr@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, 4 Nov 2014, Vignesh R wrote: > This patch adds hwmod support for tscadc to work on am43xx-evm. The am33xx > hwmod structures of tscadc has been moved to ipblock_data so that it can > be reused in am43xx. The clock domain names are separately set for am33xx > and am43xx. Thus tscadc dt entries can now be added to am43xx board > dt files. > > Signed-off-by: Vignesh R <vigneshr@ti.com> ... > diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h > index 6e57b8ad0db5..b92a7c7825fa 100644 > --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h > +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h ... > +static void am33xx_hwmod_clockdomain(void) > +{ > + CLKDMNAME(am33xx_l4_hs_hwmod, "l4hs_clkdm"); > + CLKDMNAME(am33xx_adc_tsc_hwmod, "l4_wkup_clkdm"); > +} > + > +static void am43xx_hwmod_clockdomain(void) > +{ > + CLKDMNAME(am33xx_l4_hs_hwmod, "l3_clkdm"); > + CLKDMNAME(am33xx_adc_tsc_hwmod, "l3s_tsc_clkdm"); > +} > + ... > + am33xx_hwmod_clockdomain(); I looked at this patch and the one before it. Is there some reason why we need to share these two hwmods between AM33xx and AM43xx? It seems cleaner just to add the ADC data directly to the AM43xx hwmod data file, not touch the AM33xx data, and not add another runtime data update for the clockdomains. Unless there's something that I'm missing? - Paul
On 11/20/2014 12:39 PM, Paul Walmsley wrote: > On Tue, 4 Nov 2014, Vignesh R wrote: > >> This patch adds hwmod support for tscadc to work on am43xx-evm. The am33xx >> hwmod structures of tscadc has been moved to ipblock_data so that it can >> be reused in am43xx. The clock domain names are separately set for am33xx >> and am43xx. Thus tscadc dt entries can now be added to am43xx board >> dt files. >> >> Signed-off-by: Vignesh R <vigneshr@ti.com> > ... > >> diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h >> index 6e57b8ad0db5..b92a7c7825fa 100644 >> --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h >> +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h > ... > >> +static void am33xx_hwmod_clockdomain(void) >> +{ >> + CLKDMNAME(am33xx_l4_hs_hwmod, "l4hs_clkdm"); >> + CLKDMNAME(am33xx_adc_tsc_hwmod, "l4_wkup_clkdm"); >> +} >> + >> +static void am43xx_hwmod_clockdomain(void) >> +{ >> + CLKDMNAME(am33xx_l4_hs_hwmod, "l3_clkdm"); >> + CLKDMNAME(am33xx_adc_tsc_hwmod, "l3s_tsc_clkdm"); >> +} >> + > ... > >> + am33xx_hwmod_clockdomain(); > I looked at this patch and the one before it. Is there some reason why we > need to share these two hwmods between AM33xx and AM43xx? It seems > cleaner just to add the ADC data directly to the AM43xx hwmod data file, > not touch the AM33xx data, and not add another runtime data update for the > clockdomains. Unless there's something that I'm missing? I wanted to reuse hwmod structures. Except for clockdomain and offset, rest of the hwmod data are same for AM33xx and AM43xx. Adding data to AM43xx hwmod file just duplicates these structures. Do you still want me to move them to AM43xx file? Regards Vignesh > - Paul
On Fri, 21 Nov 2014, Vignesh R wrote: > On 11/20/2014 12:39 PM, Paul Walmsley wrote: > > On Tue, 4 Nov 2014, Vignesh R wrote: > > > >> This patch adds hwmod support for tscadc to work on am43xx-evm. The am33xx > >> hwmod structures of tscadc has been moved to ipblock_data so that it can > >> be reused in am43xx. The clock domain names are separately set for am33xx > >> and am43xx. Thus tscadc dt entries can now be added to am43xx board > >> dt files. > >> > >> Signed-off-by: Vignesh R <vigneshr@ti.com> > > ... > > > >> diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h > >> index 6e57b8ad0db5..b92a7c7825fa 100644 > >> --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h > >> +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h > > ... > > > >> +static void am33xx_hwmod_clockdomain(void) > >> +{ > >> + CLKDMNAME(am33xx_l4_hs_hwmod, "l4hs_clkdm"); > >> + CLKDMNAME(am33xx_adc_tsc_hwmod, "l4_wkup_clkdm"); > >> +} > >> + > >> +static void am43xx_hwmod_clockdomain(void) > >> +{ > >> + CLKDMNAME(am33xx_l4_hs_hwmod, "l3_clkdm"); > >> + CLKDMNAME(am33xx_adc_tsc_hwmod, "l3s_tsc_clkdm"); > >> +} > >> + > > ... > > > >> + am33xx_hwmod_clockdomain(); > > I looked at this patch and the one before it. Is there some reason why we > > need to share these two hwmods between AM33xx and AM43xx? It seems > > cleaner just to add the ADC data directly to the AM43xx hwmod data file, > > not touch the AM33xx data, and not add another runtime data update for the > > clockdomains. Unless there's something that I'm missing? > > > I wanted to reuse hwmod structures. Except for clockdomain and offset, > rest of the hwmod data are same for AM33xx and AM43xx. Adding data to AM43xx > hwmod file just duplicates these structures. Do you still want me to move them > to AM43xx file? Yes. It looks to me like the number of lines saved by eliminating the duplication is not too different than the number of lines added with the dynamic clockdomain rewriting. Plus then we can avoid the dynamic clockdomain rewriting that we are only doing for two IP blocks. Ideally the hwmod data is meant to be static, not changed at runtime. For the moment we are stuck with the CLKCTRL rewriting but I personally consider that to be a hack. - Paul
On Friday 21 November 2014 10:56 AM, Paul Walmsley wrote: > On Fri, 21 Nov 2014, Vignesh R wrote: > >> On 11/20/2014 12:39 PM, Paul Walmsley wrote: >>> On Tue, 4 Nov 2014, Vignesh R wrote: >>> >>>> This patch adds hwmod support for tscadc to work on am43xx-evm. The am33xx >>>> hwmod structures of tscadc has been moved to ipblock_data so that it can >>>> be reused in am43xx. The clock domain names are separately set for am33xx >>>> and am43xx. Thus tscadc dt entries can now be added to am43xx board >>>> dt files. >>>> >>>> Signed-off-by: Vignesh R <vigneshr@ti.com> >>> ... >>> >>>> diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h >>>> index 6e57b8ad0db5..b92a7c7825fa 100644 >>>> --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h >>>> +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h >>> ... >>> >>>> +static void am33xx_hwmod_clockdomain(void) >>>> +{ >>>> + CLKDMNAME(am33xx_l4_hs_hwmod, "l4hs_clkdm"); >>>> + CLKDMNAME(am33xx_adc_tsc_hwmod, "l4_wkup_clkdm"); >>>> +} >>>> + >>>> +static void am43xx_hwmod_clockdomain(void) >>>> +{ >>>> + CLKDMNAME(am33xx_l4_hs_hwmod, "l3_clkdm"); >>>> + CLKDMNAME(am33xx_adc_tsc_hwmod, "l3s_tsc_clkdm"); >>>> +} >>>> + >>> ... >>> >>>> + am33xx_hwmod_clockdomain(); >>> I looked at this patch and the one before it. Is there some reason why we >>> need to share these two hwmods between AM33xx and AM43xx? It seems >>> cleaner just to add the ADC data directly to the AM43xx hwmod data file, >>> not touch the AM33xx data, and not add another runtime data update for the >>> clockdomains. Unless there's something that I'm missing? >> >> >> I wanted to reuse hwmod structures. Except for clockdomain and offset, >> rest of the hwmod data are same for AM33xx and AM43xx. Adding data to AM43xx >> hwmod file just duplicates these structures. Do you still want me to move them >> to AM43xx file? > > Yes. It looks to me like the number of lines saved by eliminating the > duplication is not too different than the number of lines added with the > dynamic clockdomain rewriting. Plus then we can avoid the dynamic > clockdomain rewriting that we are only doing for two IP blocks. Ideally > the hwmod data is meant to be static, not changed at runtime. For the > moment we are stuck with the CLKCTRL rewriting but I personally consider > that to be a hack. > Ok, will add ADC data to AM43xx and post v3. Regards Vignesh > > - Paul >
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 6e57b8ad0db5..b92a7c7825fa 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -65,6 +65,7 @@ extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer4; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer5; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer6; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer7; +extern struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc; extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc; extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0; extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 7f44922ab540..ce9c133ea9ff 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -29,6 +29,7 @@ #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst)) +#define CLKDMNAME(oh, clkdmname) ((oh).clkdm_name = (clkdmname)) /* * 'l3' class @@ -151,6 +152,45 @@ struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = { }; /* + * 'adc/tsc' class + * TouchScreen Controller (Anolog-To-Digital Converter) + */ +static struct omap_hwmod_class_sysconfig am33xx_adc_tsc_sysc = { + .rev_offs = 0x00, + .sysc_offs = 0x10, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class am33xx_adc_tsc_hwmod_class = { + .name = "adc_tsc", + .sysc = &am33xx_adc_tsc_sysc, +}; + +struct omap_hwmod am33xx_adc_tsc_hwmod = { + .name = "adc_tsc", + .class = &am33xx_adc_tsc_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .main_clk = "adc_tsc_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* L4 WKUP -> ADC_TSC */ + +struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am33xx_adc_tsc_hwmod, + .clk = "dpll_core_m4_div2_ck", + .user = OCP_USER_MPU, +}; + +/* * 'pru-icss' class * Programmable Real-Time Unit and Industrial Communication Subsystem */ @@ -1370,6 +1410,7 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_timer5_hwmod, AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer6_hwmod, AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer7_hwmod, AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET); + CLKCTRL(am33xx_adc_tsc_hwmod, AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex0_hwmod, AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex1_hwmod, @@ -1398,6 +1439,18 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET); } +static void am33xx_hwmod_clockdomain(void) +{ + CLKDMNAME(am33xx_l4_hs_hwmod, "l4hs_clkdm"); + CLKDMNAME(am33xx_adc_tsc_hwmod, "l4_wkup_clkdm"); +} + +static void am43xx_hwmod_clockdomain(void) +{ + CLKDMNAME(am33xx_l4_hs_hwmod, "l3_clkdm"); + CLKDMNAME(am33xx_adc_tsc_hwmod, "l3s_tsc_clkdm"); +} + static void omap_hwmod_am33xx_rst(void) { RSTCTRL(am33xx_pruss_hwmod, AM33XX_RM_PER_RSTCTRL_OFFSET); @@ -1409,6 +1462,7 @@ void omap_hwmod_am33xx_reg(void) { omap_hwmod_am33xx_clkctrl(); omap_hwmod_am33xx_rst(); + am33xx_hwmod_clockdomain(); } static void omap_hwmod_am43xx_clkctrl(void) @@ -1443,6 +1497,7 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_timer5_hwmod, AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer6_hwmod, AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer7_hwmod, AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET); + CLKCTRL(am33xx_adc_tsc_hwmod, AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex0_hwmod, AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex1_hwmod, @@ -1482,4 +1537,5 @@ void omap_hwmod_am43xx_reg(void) { omap_hwmod_am43xx_clkctrl(); omap_hwmod_am43xx_rst(); + am43xx_hwmod_clockdomain(); } diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index ce7d260495cb..c3ff14828850 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -88,37 +88,6 @@ static struct omap_hwmod am33xx_wkup_m3_hwmod = { }; /* - * 'adc/tsc' class - * TouchScreen Controller (Anolog-To-Digital Converter) - */ -static struct omap_hwmod_class_sysconfig am33xx_adc_tsc_sysc = { - .rev_offs = 0x00, - .sysc_offs = 0x10, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am33xx_adc_tsc_hwmod_class = { - .name = "adc_tsc", - .sysc = &am33xx_adc_tsc_sysc, -}; - -static struct omap_hwmod am33xx_adc_tsc_hwmod = { - .name = "adc_tsc", - .class = &am33xx_adc_tsc_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "adc_tsc_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * Modules omap_hwmod structures * * The following IPs are excluded for the moment because: @@ -426,24 +395,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__gpio0 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* L4 WKUP -> ADC_TSC */ -static struct omap_hwmod_addr_space am33xx_adc_tsc_addrs[] = { - { - .pa_start = 0x44E0D000, - .pa_end = 0x44E0D000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_adc_tsc_hwmod, - .clk = "dpll_core_m4_div2_ck", - .addr = am33xx_adc_tsc_addrs, - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = { .master = &am33xx_l4_hs_hwmod, .slave = &am33xx_cpgmac0_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index fea01aa3ef42..3ce8d28c0f9a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -809,6 +809,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__timer5, &am33xx_l4_ls__timer6, &am33xx_l4_ls__timer7, + &am33xx_l4_wkup__adc_tsc, &am33xx_l3_main__tpcc, &am33xx_l4_ls__uart2, &am33xx_l4_ls__uart3,
This patch adds hwmod support for tscadc to work on am43xx-evm. The am33xx hwmod structures of tscadc has been moved to ipblock_data so that it can be reused in am43xx. The clock domain names are separately set for am33xx and am43xx. Thus tscadc dt entries can now be added to am43xx board dt files. Signed-off-by: Vignesh R <vigneshr@ti.com> --- .../mach-omap2/omap_hwmod_33xx_43xx_common_data.h | 1 + .../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 56 ++++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 49 ------------------- arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 1 + 4 files changed, 58 insertions(+), 49 deletions(-)