diff mbox

[09/13] ARM: STi: DT: STiH410: Add pinctl config for usb controllers.

Message ID 1415361475-6218-10-git-send-email-peter.griffin@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Griffin Nov. 7, 2014, 11:57 a.m. UTC
This patch adds the required pin configiguration for the extra usb
controllers found on the stih410 device.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih407-pinctrl.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Lee Jones Nov. 10, 2014, 10:06 a.m. UTC | #1
On Fri, 07 Nov 2014, Peter Griffin wrote:

> This patch adds the required pin configiguration for the extra usb
> controllers found on the stih410 device.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm/boot/dts/stih407-pinctrl.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
> index 402844c..fdaad5d 100644
> --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
> @@ -539,6 +539,24 @@
>  				};
>  			};
>  
> +			usb0 {
> +				pinctrl_usb0: usb2-0 {
> +					st,pins {
> +						usb-oc-detect = <&pio35 0 ALT1 IN>;
> +						usb-pwr-enable = <&pio35 1 ALT1 OUT>;
> +					};
> +				};
> +			};
> +
> +			usb1 {
> +				pinctrl_usb1: usb2-1 {
> +					st,pins {
> +						usb-oc-detect = <&pio35 2 ALT1 IN>;
> +						usb-pwr-enable = <&pio35 3 ALT1 OUT>;
> +					};
> +				};
> +			};
> +
>  			usb3 {
>  				pinctrl_usb3: usb3-2 {
>  					st,pins {
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 402844c..fdaad5d 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -539,6 +539,24 @@ 
 				};
 			};
 
+			usb0 {
+				pinctrl_usb0: usb2-0 {
+					st,pins {
+						usb-oc-detect = <&pio35 0 ALT1 IN>;
+						usb-pwr-enable = <&pio35 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			usb1 {
+				pinctrl_usb1: usb2-1 {
+					st,pins {
+						usb-oc-detect = <&pio35 2 ALT1 IN>;
+						usb-pwr-enable = <&pio35 3 ALT1 OUT>;
+					};
+				};
+			};
+
 			usb3 {
 				pinctrl_usb3: usb3-2 {
 					st,pins {