| Message ID | 1415361475-6218-2-git-send-email-peter.griffin@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 07 Nov 2014, Peter Griffin wrote: > This patch adds the required pin config for all usb controllers > on the stih416. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm/boot/dts/stih416-pinctrl.dtsi | 34 ++++++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) Acked-by: Lee Jones <lee.jones@linaro.org> > diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi > index c2025bc..9cccf2d 100644 > --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi > +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi > @@ -147,6 +147,15 @@ > }; > }; > > + usb { > + pinctrl_usb3: usb3 { > + st,pins { > + oc-detect = <&pio40 0 ALT1 IN>; > + pwr-enable = <&pio40 1 ALT1 OUT>; > + }; > + }; > + }; > + > sbc_i2c1 { > pinctrl_sbc_i2c1_default: sbc_i2c1-default { > st,pins { > @@ -318,6 +327,16 @@ > }; > }; > > + usb { > + pinctrl_usb0: usb0 { > + st,pins { > + oc-detect = <&pio9 4 ALT1 IN>; > + pwr-enable = <&pio9 5 ALT1 OUT>; > + }; > + }; > + }; > + > + > i2c1 { > pinctrl_i2c1_default: i2c1-default { > st,pins { > @@ -506,6 +525,21 @@ > }; > }; > }; > + > + usb { > + pinctrl_usb1: usb1 { > + st,pins { > + oc-detect = <&pio18 0 ALT1 IN>; > + pwr-enable = <&pio18 1 ALT1 OUT>; > + }; > + }; > + pinctrl_usb2: usb2 { > + st,pins { > + oc-detect = <&pio18 2 ALT1 IN>; > + pwr-enable = <&pio18 3 ALT1 OUT>; > + }; > + }; > + }; > }; > > pin-controller-fvdp-fe {
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index c2025bc..9cccf2d 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -147,6 +147,15 @@ }; }; + usb { + pinctrl_usb3: usb3 { + st,pins { + oc-detect = <&pio40 0 ALT1 IN>; + pwr-enable = <&pio40 1 ALT1 OUT>; + }; + }; + }; + sbc_i2c1 { pinctrl_sbc_i2c1_default: sbc_i2c1-default { st,pins { @@ -318,6 +327,16 @@ }; }; + usb { + pinctrl_usb0: usb0 { + st,pins { + oc-detect = <&pio9 4 ALT1 IN>; + pwr-enable = <&pio9 5 ALT1 OUT>; + }; + }; + }; + + i2c1 { pinctrl_i2c1_default: i2c1-default { st,pins { @@ -506,6 +525,21 @@ }; }; }; + + usb { + pinctrl_usb1: usb1 { + st,pins { + oc-detect = <&pio18 0 ALT1 IN>; + pwr-enable = <&pio18 1 ALT1 OUT>; + }; + }; + pinctrl_usb2: usb2 { + st,pins { + oc-detect = <&pio18 2 ALT1 IN>; + pwr-enable = <&pio18 3 ALT1 OUT>; + }; + }; + }; }; pin-controller-fvdp-fe {
This patch adds the required pin config for all usb controllers on the stih416. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- arch/arm/boot/dts/stih416-pinctrl.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)