diff mbox

[v2,14/14] ARM: STi: DT: STiH410: Add DT nodes for the ehci and ohci usb controllers.

Message ID 1415876417-28728-15-git-send-email-peter.griffin@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Griffin Nov. 13, 2014, 11 a.m. UTC 
This patch adds the DT nodes for the extra ehci and ohci usb controllers
on the stih410 SoC.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih410.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 5ade3ed..3da08e5 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -34,5 +34,57 @@ 
 				 <&picophyreset STIH407_PICOPHY1_RESET>;
 			reset-names = "global", "port";
 		};
+
+		ohci0: usb@9a03c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a03c00 0x100>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy0>;
+			phy-names = "usb";
+		};
+
+		ehci0: usb@9a03e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a03e00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy0>;
+			phy-names = "usb";
+		};
+
+		ohci1: usb@9a83c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a83c00 0x100>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+		};
+
+		ehci1: usb@9a83e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a83e00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+		};
 	};
 };