diff mbox

[v10,09/10] arm: dts: qcom: Add idle states device nodes for 8084

Message ID 1416593037-27527-10-git-send-email-lina.iyer@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Lina Iyer Nov. 21, 2014, 6:03 p.m. UTC 
Add ARM common idle states device bindings for cpuidle support for APQ
8084.

Support standby and standalone power collapse (power down that does not
affect any SoC idle states) for each cpu.

Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8084.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Comments

Stephen Boyd Nov. 26, 2014, 8:16 p.m. UTC | #1 
On 11/21/2014 10:03 AM, Lina Iyer wrote:
> Add ARM common idle states device bindings for cpuidle support for APQ
> 8084.
>
> Support standby and standalone power collapse (power down that does not
> affect any SoC idle states) for each cpu.
>
> Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
>

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 4466b9e..207be15 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -22,6 +22,7 @@ 
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_STBY &CPU_SPC>;
 		};
 
 		cpu@1 {
@@ -32,6 +33,7 @@ 
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_STBY &CPU_SPC>;
 		};
 
 		cpu@2 {
@@ -42,6 +44,7 @@ 
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_STBY &CPU_SPC>;
 		};
 
 		cpu@3 {
@@ -52,6 +55,7 @@ 
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_STBY &CPU_SPC>;
 		};
 
 		L2: l2-cache {
@@ -59,6 +63,22 @@ 
 			cache-level = <2>;
 			qcom,saw = <&saw_l2>;
 		};
+
+		idle-states {
+			CPU_STBY: standby {
+				compatible = "qcom,idle-state-stby", "arm,idle-state";
+				entry-latency-us = <1>;
+				exit-latency-us = <1>;
+				min-residency-us = <2>;
+			};
+
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc", "arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
 	};
 
 	cpu-pmu {