@@ -8,56 +8,56 @@
* 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
*/
-#define IRQ_GPIO0 0
-#define IRQ_GPIO1 1
-#define IRQ_GPIO2 2
-#define IRQ_GPIO3 3
-#define IRQ_GPIO4 4
-#define IRQ_GPIO5 5
-#define IRQ_GPIO6 6
-#define IRQ_GPIO7 7
-#define IRQ_GPIO8 8
-#define IRQ_GPIO9 9
-#define IRQ_GPIO10 10
-#define IRQ_GPIO11_27 11
-#define IRQ_LCD 12 /* LCD controller */
-#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */
-#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */
-#define IRQ_Ser1UART 15 /* Ser. port 1 UART */
-#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */
-#define IRQ_Ser3UART 17 /* Ser. port 3 UART */
-#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */
-#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */
-#define IRQ_DMA0 20 /* DMA controller channel 0 */
-#define IRQ_DMA1 21 /* DMA controller channel 1 */
-#define IRQ_DMA2 22 /* DMA controller channel 2 */
-#define IRQ_DMA3 23 /* DMA controller channel 3 */
-#define IRQ_DMA4 24 /* DMA controller channel 4 */
-#define IRQ_DMA5 25 /* DMA controller channel 5 */
-#define IRQ_OST0 26 /* OS Timer match 0 */
-#define IRQ_OST1 27 /* OS Timer match 1 */
-#define IRQ_OST2 28 /* OS Timer match 2 */
-#define IRQ_OST3 29 /* OS Timer match 3 */
-#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */
-#define IRQ_RTCAlrm 31 /* RTC Alarm */
+#define IRQ_GPIO0 1
+#define IRQ_GPIO1 2
+#define IRQ_GPIO2 3
+#define IRQ_GPIO3 4
+#define IRQ_GPIO4 5
+#define IRQ_GPIO5 6
+#define IRQ_GPIO6 7
+#define IRQ_GPIO7 8
+#define IRQ_GPIO8 9
+#define IRQ_GPIO9 10
+#define IRQ_GPIO10 11
+#define IRQ_GPIO11_27 12
+#define IRQ_LCD 13 /* LCD controller */
+#define IRQ_Ser0UDC 14 /* Ser. port 0 UDC */
+#define IRQ_Ser1SDLC 15 /* Ser. port 1 SDLC */
+#define IRQ_Ser1UART 16 /* Ser. port 1 UART */
+#define IRQ_Ser2ICP 17 /* Ser. port 2 ICP */
+#define IRQ_Ser3UART 18 /* Ser. port 3 UART */
+#define IRQ_Ser4MCP 19 /* Ser. port 4 MCP */
+#define IRQ_Ser4SSP 20 /* Ser. port 4 SSP */
+#define IRQ_DMA0 21 /* DMA controller channel 0 */
+#define IRQ_DMA1 22 /* DMA controller channel 1 */
+#define IRQ_DMA2 23 /* DMA controller channel 2 */
+#define IRQ_DMA3 24 /* DMA controller channel 3 */
+#define IRQ_DMA4 25 /* DMA controller channel 4 */
+#define IRQ_DMA5 26 /* DMA controller channel 5 */
+#define IRQ_OST0 27 /* OS Timer match 0 */
+#define IRQ_OST1 28 /* OS Timer match 1 */
+#define IRQ_OST2 29 /* OS Timer match 2 */
+#define IRQ_OST3 30 /* OS Timer match 3 */
+#define IRQ_RTC1Hz 31 /* RTC 1 Hz clock */
+#define IRQ_RTCAlrm 32 /* RTC Alarm */
-#define IRQ_GPIO11 32
-#define IRQ_GPIO12 33
-#define IRQ_GPIO13 34
-#define IRQ_GPIO14 35
-#define IRQ_GPIO15 36
-#define IRQ_GPIO16 37
-#define IRQ_GPIO17 38
-#define IRQ_GPIO18 39
-#define IRQ_GPIO19 40
-#define IRQ_GPIO20 41
-#define IRQ_GPIO21 42
-#define IRQ_GPIO22 43
-#define IRQ_GPIO23 44
-#define IRQ_GPIO24 45
-#define IRQ_GPIO25 46
-#define IRQ_GPIO26 47
-#define IRQ_GPIO27 48
+#define IRQ_GPIO11 33
+#define IRQ_GPIO12 34
+#define IRQ_GPIO13 35
+#define IRQ_GPIO14 36
+#define IRQ_GPIO15 37
+#define IRQ_GPIO16 38
+#define IRQ_GPIO17 39
+#define IRQ_GPIO18 40
+#define IRQ_GPIO19 41
+#define IRQ_GPIO20 42
+#define IRQ_GPIO21 43
+#define IRQ_GPIO22 44
+#define IRQ_GPIO23 45
+#define IRQ_GPIO24 46
+#define IRQ_GPIO25 47
+#define IRQ_GPIO26 48
+#define IRQ_GPIO27 49
/*
* The next 16 interrupts are for board specific purposes. Since
@@ -65,8 +65,8 @@
* these. If you need more, increase IRQ_BOARD_END, but keep it
* within sensible limits. IRQs 49 to 64 are available.
*/
-#define IRQ_BOARD_START 49
-#define IRQ_BOARD_END 65
+#define IRQ_BOARD_START 50
+#define IRQ_BOARD_END 66
/*
* Figure out the MAX IRQ number.
As IRQ0 should not be used (especially in when using irq domains), shift all virtual IRQ numbers by one. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> --- arch/arm/mach-sa1100/include/mach/irqs.h | 102 +++++++++++++++---------------- 1 file changed, 51 insertions(+), 51 deletions(-)