diff mbox

[v6,4/6] arm64: Add DTS support for FSL's LS2085A SoC

Message ID 1417002447-19163-5-git-send-email-bhupesh.sharma@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

bhupesh.sharma@freescale.com Nov. 26, 2014, 11:47 a.m. UTC
This patch adds the device tree support for FSL LS2085A SoC
based on ARMv8 architecture.

Following levels of DTSI/DTS files have been created for the
LS2085A SoC family:

- fsl-ls2085a.dtsi:
DTS-Include file for FSL LS2085A SoC.

- fsl-ls2085a-simu.dts:
DTS file for FSL LS2085a software simulator model.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnab Basu <arnab_basu@rocketmail.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
---
 arch/arm64/boot/dts/fsl-ls2085a-simu.dts |   65 ++++++++++++
 arch/arm64/boot/dts/fsl-ls2085a.dtsi     |  163 ++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+)
 create mode 100644 arch/arm64/boot/dts/fsl-ls2085a-simu.dts
 create mode 100644 arch/arm64/boot/dts/fsl-ls2085a.dtsi

Comments

Marc Zyngier Nov. 26, 2014, 2:45 p.m. UTC | #1
On 26/11/14 11:47, Bhupesh Sharma wrote:
> This patch adds the device tree support for FSL LS2085A SoC
> based on ARMv8 architecture.
> 
> Following levels of DTSI/DTS files have been created for the
> LS2085A SoC family:
> 
> - fsl-ls2085a.dtsi:
> DTS-Include file for FSL LS2085A SoC.
> 
> - fsl-ls2085a-simu.dts:
> DTS file for FSL LS2085a software simulator model.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
> Signed-off-by: Arnab Basu <arnab_basu@rocketmail.com>
> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
> ---
>  arch/arm64/boot/dts/fsl-ls2085a-simu.dts |   65 ++++++++++++
>  arch/arm64/boot/dts/fsl-ls2085a.dtsi     |  163 ++++++++++++++++++++++++++++++
>  2 files changed, 228 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/fsl-ls2085a-simu.dts
>  create mode 100644 arch/arm64/boot/dts/fsl-ls2085a.dtsi
> 
> diff --git a/arch/arm64/boot/dts/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/fsl-ls2085a-simu.dts
> new file mode 100644
> index 0000000..82e2a6f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/fsl-ls2085a-simu.dts
> @@ -0,0 +1,65 @@
> +/*
> + * Device Tree file for Freescale LS2085a software Simulator model
> + *
> + * Copyright (C) 2014, Freescale Semiconductor
> + *
> + * Bhupesh Sharma <bhupesh.sharma@freescale.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This library is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This library is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + *     You should have received a copy of the GNU General Public
> + *     License along with this library; if not, write to the Free
> + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> + *     MA 02110-1301 USA
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +/include/ "fsl-ls2085a.dtsi"
> +
> +/ {
> +	model = "Freescale Layerscape 2085a software Simulator model";
> +	compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
> +
> +	ethernet@2210000 {
> +		compatible = "smsc,lan91c111";
> +		reg = <0x0 0x2210000 0x0 0x100>;
> +		interrupts = <0 58 0x1>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/fsl-ls2085a.dtsi
> new file mode 100644
> index 0000000..e281ceb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/fsl-ls2085a.dtsi
> @@ -0,0 +1,163 @@
> +/*
> + * Device Tree Include file for Freescale Layerscape-2085A family SoC.
> + *
> + * Copyright (C) 2014, Freescale Semiconductor
> + *
> + * Bhupesh Sharma <bhupesh.sharma@freescale.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This library is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This library is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + *     You should have received a copy of the GNU General Public
> + *     License along with this library; if not, write to the Free
> + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> + *     MA 02110-1301 USA
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/ {
> +	compatible = "fsl,ls2085a";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		/*
> +		 * We expect the enable-method for cpu's to be "psci", but this
> +		 * is dependent on the SoC FW, which will fill this in.
> +		 *
> +		 * Currently supported enable-method is psci v0.2
> +		 */
> +
> +		/* We have 4 clusters having 2 Cortex-A57 cores each */
> +		cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57";
> +			reg = <0x0 0x0>;
> +		};
> +
> +		cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57";
> +			reg = <0x0 0x1>;
> +		};
> +
> +		cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57";
> +			reg = <0x0 0x100>;
> +		};
> +
> +		cpu@101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57";
> +			reg = <0x0 0x101>;
> +		};
> +
> +		cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57";
> +			reg = <0x0 0x200>;
> +		};
> +
> +		cpu@201 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57";
> +			reg = <0x0 0x201>;
> +		};
> +
> +		cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57";
> +			reg = <0x0 0x300>;
> +		};
> +
> +		cpu@301 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57";
> +			reg = <0x0 0x301>;
> +		};
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x00000000 0x80000000 0 0x80000000>;
> +		      /* DRAM space - 1, size : 2 GB DRAM */
> +	};
> +
> +	gic: interrupt-controller@6000000 {
> +		compatible = "arm,gic-v3";
> +		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
> +		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		interrupts = <1 9 0x4>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
> +			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
> +			     <1 11 0x8>, /* Virtual PPI, active-low */
> +			     <1 10 0x8>; /* Hypervisor PPI, active-low */
> +	};

Sorry, but this is still wrong. The *core* indeed outputs these signals
as active low. But the GIC doesn't trigger on active low, only active
high (yes, there is an inverter in the way).

If you look at the binding for GICv3, you'll notice that value 8 is not
valid, only 1 or 4.

All these interrupts should read "<1 x 4>".

Thanks,

	M.
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/fsl-ls2085a-simu.dts
new file mode 100644
index 0000000..82e2a6f
--- /dev/null
+++ b/arch/arm64/boot/dts/fsl-ls2085a-simu.dts
@@ -0,0 +1,65 @@ 
+/*
+ * Device Tree file for Freescale LS2085a software Simulator model
+ *
+ * Copyright (C) 2014, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2085a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2085a software Simulator model";
+	compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+
+	ethernet@2210000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		interrupts = <0 58 0x1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/fsl-ls2085a.dtsi
new file mode 100644
index 0000000..e281ceb
--- /dev/null
+++ b/arch/arm64/boot/dts/fsl-ls2085a.dtsi
@@ -0,0 +1,163 @@ 
+/*
+ * Device Tree Include file for Freescale Layerscape-2085A family SoC.
+ *
+ * Copyright (C) 2014, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "fsl,ls2085a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/*
+		 * We expect the enable-method for cpu's to be "psci", but this
+		 * is dependent on the SoC FW, which will fill this in.
+		 *
+		 * Currently supported enable-method is psci v0.2
+		 */
+
+		/* We have 4 clusters having 2 Cortex-A57 cores each */
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x1>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x201>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x300>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x301>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	serial0: serial@21c0500 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0500 0x0 0x100>;
+		clock-frequency = <0>;	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	serial1: serial@21c0600 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0600 0x0 0x100>;
+		clock-frequency = <0>; 	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc";
+		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+	};
+};