@@ -56,10 +56,6 @@
#include <mach/hardware.h>
#endif
-#ifdef CONFIG_ARCH_LUBBOCK
-#include <mach/lubbock.h>
-#endif
-
/*
* This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
* series processors. The UDC for the IXP 4xx series is very similar.
@@ -1334,43 +1330,6 @@ static int pxa25x_udc_stop(struct usb_gadget*g,
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_ARCH_LUBBOCK
-
-/* Lubbock has separate connect and disconnect irqs. More typical designs
- * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
- */
-
-static irqreturn_t
-lubbock_vbus_irq(int irq, void *_dev)
-{
- struct pxa25x_udc *dev = _dev;
- int vbus;
-
- dev->stats.irqs++;
- switch (irq) {
- case LUBBOCK_USB_IRQ:
- vbus = 1;
- disable_irq(LUBBOCK_USB_IRQ);
- enable_irq(LUBBOCK_USB_DISC_IRQ);
- break;
- case LUBBOCK_USB_DISC_IRQ:
- vbus = 0;
- disable_irq(LUBBOCK_USB_DISC_IRQ);
- enable_irq(LUBBOCK_USB_IRQ);
- break;
- default:
- return IRQ_NONE;
- }
-
- pxa25x_udc_vbus_session(&dev->gadget, vbus);
- return IRQ_HANDLED;
-}
-
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
static inline void clear_ep_state (struct pxa25x_udc *dev)
{
unsigned i;
@@ -2154,26 +2113,6 @@ static int pxa25x_udc_probe(struct platform_device *pdev)
}
dev->got_irq = 1;
-#ifdef CONFIG_ARCH_LUBBOCK
- if (machine_is_lubbock()) {
- retval = devm_request_irq(&pdev->dev, LUBBOCK_USB_DISC_IRQ,
- lubbock_vbus_irq, 0, driver_name,
- dev);
- if (retval != 0) {
- pr_err("%s: can't get irq %i, err %d\n",
- driver_name, LUBBOCK_USB_DISC_IRQ, retval);
- goto err;
- }
- retval = devm_request_irq(&pdev->dev, LUBBOCK_USB_IRQ,
- lubbock_vbus_irq, 0, driver_name,
- dev);
- if (retval != 0) {
- pr_err("%s: can't get irq %i, err %d\n",
- driver_name, LUBBOCK_USB_IRQ, retval);
- goto err;
- }
- } else
-#endif
create_debug_files(dev);
retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
@@ -130,11 +130,6 @@ struct pxa25x_udc {
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_ARCH_LUBBOCK
-#include <mach/lubbock.h>
-/* lubbock can also report usb connect/disconnect irqs */
-#endif
-
static struct pxa25x_udc *the_controller;
/*-------------------------------------------------------------------------*/
Now, as there is a special phy for lubbock platforms, drop all lubbock-specific code from pxa25x udc driver. It should use phy instead. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> --- drivers/usb/gadget/udc/pxa25x_udc.c | 61 ------------------------------------- drivers/usb/gadget/udc/pxa25x_udc.h | 5 --- 2 files changed, 66 deletions(-)