@@ -130,6 +130,10 @@
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
};
+&src {
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&uart0 {
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -43,6 +43,14 @@
clock-frequency = <32768>;
};
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&src>;
+ offset = <0x0>;
+ mask = <0x1000>;
+ priority = <192>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -318,6 +326,11 @@
clocks = <&clks VF610_CLK_USBC0>;
status = "disabled";
};
+
+ src: src@4006e000 {
+ compatible = "fsl,vf610-src", "syscon";
+ reg = <0x4006e000 0x1000>;
+ };
};
aips1: aips-bus@40080000 {
Add the system reset controller (SRC) module and use syscon-reboot to register a restart handler which restarts the SoC using the SRC SW_RST bit. Signed-off-by: Stefan Agner <stefan@agner.ch> --- arch/arm/boot/dts/vf500.dtsi | 4 ++++ arch/arm/boot/dts/vfxxx.dtsi | 13 +++++++++++++ 2 files changed, 17 insertions(+)