@@ -80,138 +80,6 @@ static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
static struct irq_domain *sa1100_normal_irqdomain;
-/*
- * SA1100 GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-static int GPIO_IRQ_mask;
-
-static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
-{
- unsigned int mask;
-
- mask = BIT(d->hwirq);
-
- if (type == IRQ_TYPE_PROBE) {
- if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
- return 0;
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- if (type & IRQ_TYPE_EDGE_RISING) {
- GPIO_IRQ_rising_edge |= mask;
- } else
- GPIO_IRQ_rising_edge &= ~mask;
- if (type & IRQ_TYPE_EDGE_FALLING) {
- GPIO_IRQ_falling_edge |= mask;
- } else
- GPIO_IRQ_falling_edge &= ~mask;
-
- GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
- GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-
- return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged.
- */
-static void sa1100_gpio_ack(struct irq_data *d)
-{
- GEDR = BIT(d->hwirq);
-}
-
-static void sa1100_gpio_mask(struct irq_data *d)
-{
- unsigned int mask = BIT(d->hwirq);
-
- GPIO_IRQ_mask &= ~mask;
-
- GRER &= ~mask;
- GFER &= ~mask;
-}
-
-static void sa1100_gpio_unmask(struct irq_data *d)
-{
- unsigned int mask = BIT(d->hwirq);
-
- GPIO_IRQ_mask |= mask;
-
- GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
- GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-}
-
-static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
-{
- if (on)
- PWER |= BIT(d->hwirq);
- else
- PWER &= ~BIT(d->hwirq);
- return 0;
-}
-
-/*
- * This is for GPIO IRQs
- */
-static struct irq_chip sa1100_gpio_chip = {
- .name = "GPIO",
- .irq_ack = sa1100_gpio_ack,
- .irq_mask = sa1100_gpio_mask,
- .irq_unmask = sa1100_gpio_unmask,
- .irq_set_type = sa1100_gpio_type,
- .irq_set_wake = sa1100_gpio_wake,
-};
-
-static int sa1100_gpio_irqdomain_map(struct irq_domain *d,
- unsigned int irq, irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler(irq, &sa1100_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-
- return 0;
-}
-
-static struct irq_domain_ops sa1100_gpio_irqdomain_ops = {
- .map = sa1100_gpio_irqdomain_map,
- .xlate = irq_domain_xlate_onetwocell,
-};
-
-static struct irq_domain *sa1100_gpio_irqdomain;
-
-/*
- * IRQ 0-11 (GPIO) handler. We enter here with the
- * irq_controller_lock held, and IRQs disabled. Decode the IRQ
- * and call the handler.
- */
-static void
-sa1100_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int mask;
-
- mask = GEDR;
- do {
- /*
- * clear down all currently active IRQ sources.
- * We will be processing them all.
- */
- GEDR = mask;
-
- irq = IRQ_GPIO0;
- do {
- if (mask & 1)
- generic_handle_irq(irq);
- mask >>= 1;
- irq++;
- } while (mask);
-
- mask = GEDR;
- } while (mask);
-}
-
static struct resource irq_resource =
DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
@@ -238,17 +106,6 @@ static int sa1100irq_suspend(void)
IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
IC_GPIO1|IC_GPIO0);
- /*
- * Set the appropriate edges for wakeup.
- */
- GRER = PWER & GPIO_IRQ_rising_edge;
- GFER = PWER & GPIO_IRQ_falling_edge;
-
- /*
- * Clear any pending GPIO interrupts.
- */
- GEDR = GEDR;
-
return 0;
}
@@ -260,9 +117,6 @@ static void sa1100irq_resume(void)
ICCR = st->iccr;
ICLR = st->iclr;
- GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
- GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-
ICMR = st->icmr;
}
}
@@ -307,11 +161,6 @@ void __init sa1100_init_irq(void)
/* all IRQs are IRQ, not FIQ */
ICLR = 0;
- /* clear all GPIO edge detects */
- GFER = 0;
- GRER = 0;
- GEDR = -1;
-
/*
* Whatever the doc says, this has to be set for the wait-on-irq
* instruction to work... on a SA1100 rev 9 at least.
@@ -322,29 +171,6 @@ void __init sa1100_init_irq(void)
32, IRQ_GPIO0_SC,
&sa1100_normal_irqdomain_ops, NULL);
- sa1100_gpio_irqdomain = irq_domain_add_simple(NULL,
- 28, IRQ_GPIO0,
- &sa1100_gpio_irqdomain_ops, NULL);
-
- /*
- * Install handlers for GPIO 0-10 edge detect interrupts
- */
- irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler);
- /*
- * Install handler for GPIO 11-27 edge detect interrupts
- */
- irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler);
-
set_handle_irq(sa1100_handle_irq);
sa1100_init_gpio();
@@ -11,6 +11,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -64,7 +65,203 @@ static struct gpio_chip sa1100_gpio_chip = {
.ngpio = GPIO_MAX + 1,
};
+/*
+ * SA1100 GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * Use this instead of directly setting GRER/GFER.
+ */
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+static int GPIO_IRQ_mask;
+
+static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int mask;
+
+ mask = BIT(d->hwirq);
+
+ if (type == IRQ_TYPE_PROBE) {
+ if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ GPIO_IRQ_rising_edge |= mask;
+ else
+ GPIO_IRQ_rising_edge &= ~mask;
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ GPIO_IRQ_falling_edge |= mask;
+ else
+ GPIO_IRQ_falling_edge &= ~mask;
+
+ GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+ GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+
+ return 0;
+}
+
+/*
+ * GPIO IRQs must be acknowledged.
+ */
+static void sa1100_gpio_ack(struct irq_data *d)
+{
+ GEDR = BIT(d->hwirq);
+}
+
+static void sa1100_gpio_mask(struct irq_data *d)
+{
+ unsigned int mask = BIT(d->hwirq);
+
+ GPIO_IRQ_mask &= ~mask;
+
+ GRER &= ~mask;
+ GFER &= ~mask;
+}
+
+static void sa1100_gpio_unmask(struct irq_data *d)
+{
+ unsigned int mask = BIT(d->hwirq);
+
+ GPIO_IRQ_mask |= mask;
+
+ GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+ GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+}
+
+static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
+{
+ if (on)
+ PWER |= BIT(d->hwirq);
+ else
+ PWER &= ~BIT(d->hwirq);
+ return 0;
+}
+
+/*
+ * This is for GPIO IRQs
+ */
+static struct irq_chip sa1100_gpio_irq_chip = {
+ .name = "GPIO",
+ .irq_ack = sa1100_gpio_ack,
+ .irq_mask = sa1100_gpio_mask,
+ .irq_unmask = sa1100_gpio_unmask,
+ .irq_set_type = sa1100_gpio_type,
+ .irq_set_wake = sa1100_gpio_wake,
+};
+
+static int sa1100_gpio_irqdomain_map(struct irq_domain *d,
+ unsigned int irq, irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops sa1100_gpio_irqdomain_ops = {
+ .map = sa1100_gpio_irqdomain_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_domain *sa1100_gpio_irqdomain;
+
+/*
+ * IRQ 0-11 (GPIO) handler. We enter here with the
+ * irq_controller_lock held, and IRQs disabled. Decode the IRQ
+ * and call the handler.
+ */
+static void
+sa1100_gpio_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int mask;
+
+ mask = GEDR;
+ do {
+ /*
+ * clear down all currently active IRQ sources.
+ * We will be processing them all.
+ */
+ GEDR = mask;
+
+ irq = IRQ_GPIO0;
+ do {
+ if (mask & 1)
+ generic_handle_irq(irq);
+ mask >>= 1;
+ irq++;
+ } while (mask);
+
+ mask = GEDR;
+ } while (mask);
+}
+
+static int sa1100_gpio_suspend(void)
+{
+ /*
+ * Set the appropriate edges for wakeup.
+ */
+ GRER = PWER & GPIO_IRQ_rising_edge;
+ GFER = PWER & GPIO_IRQ_falling_edge;
+
+ /*
+ * Clear any pending GPIO interrupts.
+ */
+ GEDR = GEDR;
+
+ return 0;
+}
+
+static void sa1100_gpio_resume(void)
+{
+ GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+ GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+}
+
+static struct syscore_ops sa1100_gpio_syscore_ops = {
+ .suspend = sa1100_gpio_suspend,
+ .resume = sa1100_gpio_resume,
+};
+
+static int __init sa1100_gpio_init_devicefs(void)
+{
+ register_syscore_ops(&sa1100_gpio_syscore_ops);
+ return 0;
+}
+
+device_initcall(sa1100_gpio_init_devicefs);
+
void __init sa1100_init_gpio(void)
{
+ /* clear all GPIO edge detects */
+ GFER = 0;
+ GRER = 0;
+ GEDR = -1;
+
gpiochip_add(&sa1100_gpio_chip);
+
+ sa1100_gpio_irqdomain = irq_domain_add_simple(NULL,
+ 28, IRQ_GPIO0,
+ &sa1100_gpio_irqdomain_ops, NULL);
+
+ /*
+ * Install handlers for GPIO 0-10 edge detect interrupts
+ */
+ irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler);
+ irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler);
+ /*
+ * Install handler for GPIO 11-27 edge detect interrupts
+ */
+ irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler);
+
}
As a part of driver consolidation, move GPIO-related IRQ code to drivers/gpio/gpio-sa1100.c. The code does not use GPIOLIB_IRQCHIP (yet), because sa1100 does not have a device for gpios, which is a requirement for GPIOLIB_IRQCHIP. This will be the next step. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> --- arch/arm/mach-sa1100/irq.c | 174 --------------------------------------- drivers/gpio/gpio-sa1100.c | 197 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 197 insertions(+), 174 deletions(-)