diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index d369ae0..963e398 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1719,38 +1719,98 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t usba_vbus_irq(int irq, void *devid)
+static int start_clock(struct usba_udc *udc)
+{
+	int ret;
+
+	if (udc->clocked)
+		return 0;
+
+	ret = clk_prepare_enable(udc->pclk);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(udc->hclk);
+	if (ret) {
+		clk_disable_unprepare(udc->pclk);
+		return ret;
+	}
+
+	udc->clocked = true;
+	return 0;
+}
+
+static void stop_clock(struct usba_udc *udc)
+{
+	if (!udc->clocked)
+		return;
+
+	clk_disable_unprepare(udc->hclk);
+	clk_disable_unprepare(udc->pclk);
+
+	udc->clocked = false;
+}
+
+static int usba_start(struct usba_udc *udc)
+{
+	unsigned long flags;
+	int ret;
+
+	ret = start_clock(udc);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	toggle_bias(1);
+	usba_writel(udc, CTRL, USBA_ENABLE_MASK);
+	usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+static void usba_stop(struct usba_udc *udc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	reset_all_endpoints(udc);
+
+	/* This will also disable the DP pullup */
+	toggle_bias(0);
+	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	stop_clock(udc);
+}
+
+static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
 {
 	struct usba_udc *udc = devid;
 	int vbus;
+	int ret;
 
 	/* debounce */
 	udelay(10);
 
-	spin_lock(&udc->lock);
+	mutex_lock(&udc->vbus_mutex);
 
 	vbus = vbus_is_present(udc);
 	if (vbus != udc->vbus_prev) {
+		udc->vbus_prev = vbus;
 		if (vbus) {
-			toggle_bias(1);
-			usba_writel(udc, CTRL, USBA_ENABLE_MASK);
-			usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+			ret = usba_start(udc);
+			if (ret)
+				goto out;
 		} else {
-			udc->gadget.speed = USB_SPEED_UNKNOWN;
-			reset_all_endpoints(udc);
-			toggle_bias(0);
-			usba_writel(udc, CTRL, USBA_DISABLE_MASK);
-			if (udc->driver->disconnect) {
-				spin_unlock(&udc->lock);
+			usba_stop(udc);
+
+			if (udc->driver->disconnect)
 				udc->driver->disconnect(&udc->gadget);
-				spin_lock(&udc->lock);
-			}
 		}
-		udc->vbus_prev = vbus;
 	}
 
-	spin_unlock(&udc->lock);
-
+out:
+	mutex_unlock(&udc->vbus_mutex);
 	return IRQ_HANDLED;
 }
 
@@ -1762,57 +1822,47 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 	unsigned long flags;
 
 	spin_lock_irqsave(&udc->lock, flags);
-
 	udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
 	udc->driver = driver;
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	ret = clk_prepare_enable(udc->pclk);
-	if (ret)
-		return ret;
-	ret = clk_prepare_enable(udc->hclk);
-	if (ret) {
-		clk_disable_unprepare(udc->pclk);
-		return ret;
-	}
+	mutex_lock(&udc->vbus_mutex);
 
-	udc->vbus_prev = 0;
 	if (gpio_is_valid(udc->vbus_pin))
 		enable_irq(gpio_to_irq(udc->vbus_pin));
 
 	/* If Vbus is present, enable the controller and wait for reset */
-	spin_lock_irqsave(&udc->lock, flags);
-	if (vbus_is_present(udc) && udc->vbus_prev == 0) {
-		toggle_bias(1);
-		usba_writel(udc, CTRL, USBA_ENABLE_MASK);
-		usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
-
-		udc->vbus_prev = 1;
+	udc->vbus_prev = vbus_is_present(udc);
+	if (udc->vbus_prev) {
+		ret = usba_start(udc);
+		if (ret)
+			goto err;
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
 
+	mutex_unlock(&udc->vbus_mutex);
 	return 0;
+
+err:
+	if (gpio_is_valid(udc->vbus_pin))
+		disable_irq(gpio_to_irq(udc->vbus_pin));
+
+	mutex_unlock(&udc->vbus_mutex);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+	udc->driver = NULL;
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
 }
 
 static int atmel_usba_stop(struct usb_gadget *gadget)
 {
 	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
-	unsigned long flags;
 
 	if (gpio_is_valid(udc->vbus_pin))
 		disable_irq(gpio_to_irq(udc->vbus_pin));
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	reset_all_endpoints(udc);
-	spin_unlock_irqrestore(&udc->lock, flags);
-
-	/* This will also disable the DP pullup */
-	toggle_bias(0);
-	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
-
-	clk_disable_unprepare(udc->hclk);
-	clk_disable_unprepare(udc->pclk);
+	usba_stop(udc);
 
 	udc->driver = NULL;
 
@@ -1992,6 +2042,7 @@ static int usba_udc_probe(struct platform_device *pdev)
 		return PTR_ERR(hclk);
 
 	spin_lock_init(&udc->lock);
+	mutex_init(&udc->vbus_mutex);
 	udc->pdev = pdev;
 	udc->pclk = pclk;
 	udc->hclk = hclk;
@@ -2045,9 +2096,9 @@ static int usba_udc_probe(struct platform_device *pdev)
 	if (gpio_is_valid(udc->vbus_pin)) {
 		if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
 			irq_set_status_flags(gpio_to_irq(udc->vbus_pin), IRQ_NOAUTOEN);
-			ret = devm_request_irq(&pdev->dev,
-					gpio_to_irq(udc->vbus_pin),
-					usba_vbus_irq, 0,
+			ret = devm_request_threaded_irq(&pdev->dev,
+					gpio_to_irq(udc->vbus_pin), NULL,
+					usba_vbus_irq_thread, IRQF_ONESHOT,
 					"atmel_usba_udc", udc);
 			if (ret) {
 				udc->vbus_pin = -ENODEV;
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
index a70706e..3ceed76 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.h
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -308,6 +308,9 @@ struct usba_udc {
 	/* Protect hw registers from concurrent modifications */
 	spinlock_t lock;
 
+	/* Mutex to prevent concurrent start or stop */
+	struct mutex vbus_mutex;
+
 	void __iomem *regs;
 	void __iomem *fifo;
 
@@ -321,6 +324,7 @@ struct usba_udc {
 	struct clk *pclk;
 	struct clk *hclk;
 	struct usba_ep *usba_ep;
+	bool clocked;
 
 	u16 devstatus;
 
