@@ -165,7 +165,7 @@
gsbi1: gsbi@12440000 {
status = "disabled";
- compatible = "qcom,gsbi-v1.0.0";
+ compatible = "qcom,gsbi-apq8064";
reg = <0x12440000 0x100>;
clocks = <&gcc GSBI1_H_CLK>;
clock-names = "iface";
@@ -173,6 +173,9 @@
#size-cells = <1>;
ranges;
+ qcom,gsbi-num = <1>;
+ syscon-tcsr = <&tcsr>;
+
i2c1: i2c@12460000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x12460000 0x1000>;
@@ -186,7 +189,7 @@
gsbi2: gsbi@12480000 {
status = "disabled";
- compatible = "qcom,gsbi-v1.0.0";
+ compatible = "qcom,gsbi-apq8064";
reg = <0x12480000 0x100>;
clocks = <&gcc GSBI2_H_CLK>;
clock-names = "iface";
@@ -194,6 +197,9 @@
#size-cells = <1>;
ranges;
+ qcom,gsbi-num = <2>;
+ syscon-tcsr = <&tcsr>;
+
i2c2: i2c@124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
@@ -207,7 +213,7 @@
gsbi7: gsbi@16600000 {
status = "disabled";
- compatible = "qcom,gsbi-v1.0.0";
+ compatible = "qcom,gsbi-apq8064";
reg = <0x16600000 0x100>;
clocks = <&gcc GSBI7_H_CLK>;
clock-names = "iface";
@@ -215,6 +221,9 @@
#size-cells = <1>;
ranges;
+ qcom,gsbi-num = <7>;
+ syscon-tcsr = <&tcsr>;
+
serial@16640000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
@@ -349,5 +358,10 @@
pinctrl-0 = <&sdc4_gpios>;
};
};
+
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-apq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
};
};
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by: Andy Gross <agross@codeaurora.org> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)