| Message ID | 1422439819-29854-2-git-send-email-javier.martinez@collabora.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 28/01/15 10:10, Javier Martinez Canillas wrote: > Many SDIO/MMC attached WLAN chips need more than one ping for their reset > sequence. Extend the pwrseq_simple binding to support more than one pin. > > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > --- > Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt > index da333d9ed94c..9a77deb164c7 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt > @@ -8,9 +8,9 @@ Required properties: > - compatible : contains "mmc-pwrseq-simple". > > Optional properties: > -- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted at > - initialization and prior we start the power up procedure of the card. It > - will be de-asserted right after the power has been provided to the card. > +- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted > + at initialization and prior we start the power up procedure of the card. > + Will be de-asserted right after the power has been provided to the card. Makes sense if you add "They" before last sentence. > > Example: > >
Srinivas, On 01/28/2015 05:34 PM, Srinivas Kandagatla wrote: >> -- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted at >> - initialization and prior we start the power up procedure of the card. It >> - will be de-asserted right after the power has been provided to the card. >> +- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted >> + at initialization and prior we start the power up procedure of the card. >> + Will be de-asserted right after the power has been provided to the card. > Makes sense if you add "They" before last sentence. Thanks, I'll change it. Best regards, Javier
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt index da333d9ed94c..9a77deb164c7 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -8,9 +8,9 @@ Required properties: - compatible : contains "mmc-pwrseq-simple". Optional properties: -- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted at - initialization and prior we start the power up procedure of the card. It - will be de-asserted right after the power has been provided to the card. +- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted + at initialization and prior we start the power up procedure of the card. + Will be de-asserted right after the power has been provided to the card. Example:
Many SDIO/MMC attached WLAN chips need more than one ping for their reset sequence. Extend the pwrseq_simple binding to support more than one pin. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)