diff mbox

hwmon: tmp102: add hibernation callbacks

Message ID 1422897271-24068-1-git-send-email-grygorii.strashko@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Grygorii.Strashko@linaro.org Feb. 2, 2015, 5:14 p.m. UTC
From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

Setting a dev_pm_ops suspend/resume pair but not a set of
hibernation functions means those pm functions will not be
called upon hibernation.
Fix this by using SIMPLE_DEV_PM_OPS, which appropriately
assigns the suspend and hibernation handlers.

Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 drivers/hwmon/tmp102.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

Comments

Guenter Roeck Feb. 2, 2015, 5:23 p.m. UTC | #1
On Mon, Feb 02, 2015 at 07:14:31PM +0200, grygorii.strashko@linaro.org wrote:
> From: Grygorii Strashko <Grygorii.Strashko@linaro.org>
> 
> Setting a dev_pm_ops suspend/resume pair but not a set of
> hibernation functions means those pm functions will not be
> called upon hibernation.
> Fix this by using SIMPLE_DEV_PM_OPS, which appropriately
> assigns the suspend and hibernation handlers.
> 
> Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
> ---
>  drivers/hwmon/tmp102.c | 13 +++----------
>  1 file changed, 3 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
> index 6748b45..4f790f5 100644
> --- a/drivers/hwmon/tmp102.c
> +++ b/drivers/hwmon/tmp102.c
> @@ -281,17 +281,10 @@ static int tmp102_resume(struct device *dev)
>  	config &= ~TMP102_CONF_SD;
>  	return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
>  }
> -
> -static const struct dev_pm_ops tmp102_dev_pm_ops = {
> -	.suspend	= tmp102_suspend,
> -	.resume		= tmp102_resume,
> -};
> -
> -#define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops)
> -#else
> -#define	TMP102_DEV_PM_OPS NULL
>  #endif /* CONFIG_PM */
>  
> +SIMPLE_DEV_PM_OPS(tmp102_dev_pm_ops, tmp102_suspend, tmp102_resume);
> +

SIMPLE_DEV_PM_OPS is defined in the context of CONFIG_PM_SLEEP,
while tmp102_suspend and tmp102_resume above are defined in the
context of CONFIG_PM. This will result in situations where the
functions are defined but not used, resulting in build warnings.

Please change the condition in the driver to #ifdef CONFIG_PM_SLEEP
to avoid this problem.

Thanks,
Guenter
diff mbox

Patch

diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 6748b45..4f790f5 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -281,17 +281,10 @@  static int tmp102_resume(struct device *dev)
 	config &= ~TMP102_CONF_SD;
 	return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
 }
-
-static const struct dev_pm_ops tmp102_dev_pm_ops = {
-	.suspend	= tmp102_suspend,
-	.resume		= tmp102_resume,
-};
-
-#define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops)
-#else
-#define	TMP102_DEV_PM_OPS NULL
 #endif /* CONFIG_PM */
 
+SIMPLE_DEV_PM_OPS(tmp102_dev_pm_ops, tmp102_suspend, tmp102_resume);
+
 static const struct i2c_device_id tmp102_id[] = {
 	{ "tmp102", 0 },
 	{ }
@@ -300,7 +293,7 @@  MODULE_DEVICE_TABLE(i2c, tmp102_id);
 
 static struct i2c_driver tmp102_driver = {
 	.driver.name	= DRIVER_NAME,
-	.driver.pm	= TMP102_DEV_PM_OPS,
+	.driver.pm	= &tmp102_dev_pm_ops,
 	.probe		= tmp102_probe,
 	.remove		= tmp102_remove,
 	.id_table	= tmp102_id,