[v9,1/3] i2c: iProc: define Broadcom iProc I2C binding

Commit Message

Ray Jui Feb. 8, 2015, 5:25 a.m. UTC

Document the I2C device tree binding for Broadcom iProc family of
SoCs

Signed-off-by: Ray Jui <[e-mail]>
Reviewed-by: Scott Branden <[e-mail]>
Reviewed-by: Kevin Cernekee <[e-mail]>
---
 .../devicetree/bindings/i2c/brcm,iproc-i2c.txt     |   37 ++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt

Comments

Wolfram Sang Feb. 9, 2015, 12:09 p.m. UTC | #1

On Sat, Feb 07, 2015 at 09:25:24PM -0800, Ray Jui wrote:
> Document the I2C device tree binding for Broadcom iProc family of
> SoCs
> 
> Signed-off-by: Ray Jui <[e-mail]>
> Reviewed-by: Scott Branden <[e-mail]>
> Reviewed-by: Kevin Cernekee <[e-mail]>

Applied to for-next, thanks!

Patch

diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
new file mode 100644
index 0000000..81f982c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
@@ -0,0 +1,37 @@ 
+Broadcom iProc I2C controller
+
+Required properties:
+
+- compatible:
+    Must be "brcm,iproc-i2c"
+
+- reg:
+    Define the base and range of the I/O address space that contain the iProc
+    I2C controller registers
+
+- interrupts:
+    Should contain the I2C interrupt
+
+- clock-frequency:
+    This is the I2C bus clock. Need to be either 100000 or 400000
+
+- #address-cells:
+    Always 1 (for I2C addresses)
+
+- #size-cells:
+    Always 0
+
+Example:
+	i2c0: i2c@18008000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		clock-frequency = <100000>;
+
+		codec: wm8750@1a {
+			compatible = "wlf,wm8750";
+			reg = <0x1a>;
+		};
+	};